Jet-Lube Easy-Clean Liquid Frac and Rig Wash: How an Alkaline Degreaser Removes Oil and Carbon Safely

JetLube EASY-CLEAN® Liquid alkaline cleaner and degreaser concentrate is the episode focus — and if your crew is fighting caked carbon, grease, and crude oil on frac iron, drill rigs, or construction iron, this is the product conversation your next procurement cycle needs. EASY-CLEAN Liquid is formulated at pH 14 with a specific gravity of 1.07 and a viscosity of 4.5 cPs. That aggressive alkalinity, paired with advanced emulsifying technology, is what drives it through heavy hydrocarbon deposits where lighter cleaners stall out. Zero VOC content (0 g/L), no fluorocarbons, no SARA Title III Section 313 Part 372 listed ingredients, no phosphates, no chlorides — this is your answer when the environmental compliance team starts asking questions about solvent-based degreasers on-site. Flash point: none to 212°F (ASTM D93 PMCC Closed Cup). Auto ignition point: none to 500°F. Noncombustible, nonflammable, non-fuming. Order the 5-gallon jug and see full product specs here: https://www.pe-energy.com/product/30035-jet-lube-easy-clean-liquid-alkaline-cleaner-and-degreaser-concentrate-5-gal-jug/ The dilution chart is where procurement managers and field supervisors get their real ROI. For drilling and construction equipment with the heaviest buildup, run a 1:10 E-C Liquid to water ratio — the most concentrated recommended mix, purpose-built for frac and rig wash service. Step down to 1:50 for cold-water high-pressure sprayers at 150–300 psi, 1:100 for hot water at that same pressure range or cold water at 500–800 psi, and stretch to 1:200 for 500–800 psi hot-water pressure washing — maximum dilution, still effective. For general fuel oil truck bodies and fleet cleaning, 1:40 is the call. One concentrate SKU covers your entire wash program from the shop floor to the field pad. Application method flexibility is a genuine operational advantage. EASY-CLEAN Liquid supports pressure washing, steam cleaning, ultrasound cleaning, parts degreasing, and brush or spray application followed by water rinse or wipe-down. That means one product handles controlled shop degreasing of components and full rig wash in the field — fewer SKUs on the shelf, fewer vendor relationships to manage, simpler RFPs. The product is water-soluble and biodegradable, and it dilutes with ordinary tap water. Salt water works in a pinch but reduces cleaning effectiveness, so plan your water source accordingly. One compatibility flag to brief your maintenance team on: concentrated EASY-CLEAN Liquid is corrosive to aluminum and its alloys. Confirm substrate compatibility before running this on any aluminum-bearing equipment or components. Outside that carve-out, the target market list is broad — Oilfield Equipment, Construction, Metal Fabrication, Industrial, Marine, and Utilities. JetLube is an ISO 9001 registered manufacturer. Browse the full JetLube brand catalog and wholesale pricing at https://www.pe-energy.com/brand/jet-lube/ Wholesale orders scale from a single 5-gallon jug to full pallet quantities for fleet rollout. Whether you're speccing EASY-CLEAN Liquid into a standing maintenance contract or sourcing a trial quantity to validate performance on your rig wash skid, PE Energy has the inventory and the product knowledge to support your team. Freezing point is 28°F — factor that into cold-weather storage planning for field locations. Resources https://www.pe-energy.com/product/30035-jet-lube-easy-clean-liquid-alkaline-cleaner-and-degreaser-concentrate-5-gal-jug/ https://www.pe-energy.com/brand/jet-lube/ https://gravatar.com/peenergymx https://gravatar.com/taylorindustrialequipment