Mario Cappy with Animated Eyes

Learn Guide: https://learn.adafruit.com/cappy-monster-m4sk In this video we’ll show you how to use Adafruit’s Monster M4sk and attach it to your hat with our 3d printed case. The Adafruit Monster Mask is an all-in-one board that’s designed for beginners looking to add electronics to their projects. With the monster mask you can customize the eyes to match the theme of your character. The board is designed so it can be split apart and joined back together with a cable. So you separate the eyes or bring them closer together which is great for projects like Cappy. It's really easy to customize the look of the eyes. Just open the text file and change things like the size of the iris or the color of the pupils. Check out the Learn guide for a quick start and read through all of the different options you can play with. The guide covers everything you need and there’s lots of great projects for inspiration. You can get the parts to build this project, links are in the description. Download the files and 3d print the parts. If you need to make any changes, you can modify the source files and remix the design. We got this really nice Cappy hat from Amazon. It’s got padded polyester so it feels comfortable. You can separate the eyes using flush diagonal cutters. Just follow the perforated holes. Be sure to do this in a well ventilated area and avoid breathing in any dust. With the PCBs separated, you can connect them back together with a 9-pin JST SH cable. This gives you about 10cm of distance. For this project we’ll bring them closer together. Start by installing them into the case. You can use M3 nylon screws to secure them to the built-in standoffs – An electronic screwdriver makes this much easier. This 500mah lipo battery should give you about 3 hours of battery life. You can use foam tape to stick it behind the PCB. The eye covers are printed white PLA filament and super glued on top of the case. Next we’ll need to remove the existing eyes from the hat. Start separating them by pulling apart the edges. We used a ceramic blade to slice through the glue. We were pretty careful not to cut the fabric or any of the threads. You’ll want to take your time if you want to salvage these eyes. The 3d printed case is large enough to cover up any glue stains or strands of thread. To attach the case to the hat we used a needle and thread. We designed tabs on the side of the case so you can stitch it to the hat. You can create a running stitch by passing the needle in and out of the fabric. Just be sure to make a knot and tie off the thread to keep it from coming undone. And there you have it! That's how you make Mario’s Cappy with animated eyes. If you have any projects you’d like to share, we invite you to come on adafruit’s show and tell live stream. Attendee’s get a free vinyl sticker. Also be sure to join Adafruit’s Discord server and become apart of the community! Thanks so much for watching, don’t forget to subscribe for more projects from Adafruit. Adafruit Monster M4SK https://www.adafruit.com/product/4343 Mario Hat on Amazon https://amzn.to/2pgvM20 500mah battery https://www.adafruit.com/product/1578 USB cable https://www.adafruit.com/product/4111 JST SH 9-pin cable https://www.adafruit.com/product/4350 Slice Craft Knife Ceramic Blade https://www.adafruit.com/product/4306 3D Printer Filament https://www.adafruit.com/product/2080