266 - Compartment fire framework with Vinny Gupta

A compartment fire is more than just “a fire in a room.” The moment flames, smoke, and heat are trapped by walls and fed through openings, the physics changes and so do the hazards we design for. We sit down with Dr. Vinny Gupta (University of Waterloo) to rebuild compartment fire thinking from the ground up, from what the enclosure does to airflow and smoke layers to why those effects still anchor modern structural fire safety.We trace the roots of today’s design tools through post World War II research and the foundational work of Kunio Kawagoe and Philip Thomas. That takes us straight into the ventilation factor, opening factor, and energy balance logic that underpins so much of compartment fire modeling, including parametric fires and many “golden number” rules engineers carry from project to project. Then we get honest about the fine print: the assumptions, the limits, and what gets lost when we remember the solution but forget the context it came from.From there, the conversation shifts to modern buildings that refuse to behave like classic small rooms: open-plan compartments, changing ventilation conditions, nonuniform smoke layers, and traveling fires that move across a floor plate instead of involving everything at once. We also dig into why fuel type can matter even when theory says it should not, especially once mass timber and CLT linings enter the compartment and amplify sensitivity to radiation, flow, and ventilation.If you would like to dig further, my recommendations are:Kawagoe's summary of compartment fire researchJose Torero's revisiting compartment fire Vinny's paper on mechanisms of flame spread in large compartmentsVinny's paper on different fuels and compartment fires----The Fire Science Show is produced by the Fire Science Media in collaboration with OFR Consultants. Thank you to the podcast sponsor for their continuous support towards our mission.