Skip to content
Applefeld – RV Structure & Point of Care Imaging episode artwork

Jul 6, 2023

Applefeld – RV Structure & Point of Care Imaging

from Maryland CC Project

Dr. Willard Applefeld attended the University of Maryland School of Medicine and did his internal medicine residency at Johns Hopkins. He completed a fellowship in critical care at the National […]

Episode details come from the podcast's RSS feed.

Embed this episode

Ready to play

Applefeld – RV Structure & Point of Care Imaging

of matches

Transcript Auto-generated, may contain errors

It is absolutely my pleasure to introduce our speaker for today's Critical Care Grand Rounds. So today we're lucky enough to have Dr. Willard Appelfeld with us. So Willard crossed paths here at the University of Maryland where he did his medical school training before going on to do his residency at Johns Hopkins. He completed his critical care fellowship at the National Institutes of Health and is currently doing his cardiology fellowship at Duke University. Willard is sort of an expert in all things that come to cardiopulmonary hemodynamics and cardiopulmonary physiology. I was delighted when he offered to share today's talk about RV structure and imaging. He assured me that it would not be too far over our head as most of us are probably not cardiologists who are on this talk.

This is one of hopefully at least three topics I can convince Willard to come share with us about his expertise. And I'm just absolutely so delighted to have him here today. It's been fun to kind of watch him grow up from medical student to now cardiology fellow. I'm excited to have him featured on the Maryland CC Project. And without taking up any more time, Willard, thank you so much for being here. I'm really excited to hear your talk.

Thank you for that very warm introduction. I really appreciate it. Coming back to Maryland and NIH is like coming back home. I love both these places. It's really an honor to be here and to talk to you guys about something that I think is quite interesting, RD structure and point of care imaging. In terms of my disclosures, you know, one, my views don't represent those at Duke or University of Maryland. And then my uniform disclosure that I have on all my talks is that I'm really not an artist, so you're going to have to excuse the poor illustrations. And then more of a specific one for this talk, you know, I'm not going to talk too much about RD failure.

Really amazing articles have been written, specifically one by Brian Houston and Tedford and Newman Journal that got published a few weeks ago that are worthwhile checking out. But just sort of the time constraints of this talk, I think it's worthwhile really focusing on how we image this hard-to-image ventricle. So we're going to describe the anatomical divisions of the right ventricle. We're going to understand the factors that try to influence Harvey performance. And then we're going to try to figure out what we can and cannot look at echocardiographically. And lastly, we're going to try to understand the implications this might have for clinical care in the clinical arena.

So to start, let's talk a little bit first about anatomy of the right ventricle. So when we look at a chest x-ray, really the right ventricle is the most anteriorly situated cardiac chamber. I think this is probably no surprise to our trontology colleagues, especially here at University of Maryland. This is a ventricle itself rests right behind the sternum and it forms the inferior border of the cardiac silhouette when we look at a chest x-ray. If you look at chest x-rays themselves, what you'll see is that the kind of most posterior chamber is the left atrium. That's the one that we image through and we do TEEs to look at the left atrial appendage.

Next to that, sort of really interior to that, is the right atrium. And then overlying that sort of is the LV that we're all very comfortable seeing on chest x-ray. And then the right ventricle, as you can see, is this sort of triangular-based structure that overlies the heart. It's the most interior structure. In terms of its shape, it's actually quite interesting. Whereas the left ventricle is a prolate ellipse, the right ventricle is this triangular crescentic structure.

I'm showing you here a cast mold, an endocast of a normal heart. And what you'll notice is that the right ventricle, which is colored in gray, is sort of this very triangular structure from its inflow point to its outflow tract. And it really curves over the left ventricle and really is kind of anterocephalad to that. It forms this very important crossover point where the pulmonic artery is above the anterocephalad to the aortic, to the aorta. RV outflow tract is sort of anterior to that, with the pulmonary valve forming the most superior valve in the heart. This becomes important in certain congenital heart diseases where you do lose that crisscross arrangement, which can give you some clues as to what ventricle you're looking at when you're imaging it.

The RV itself is divided into three areas. The first is the RV inlet that is formed by the tricuspid valve, the cordite tendini, and the papillary muscles for the tricuspid valve. Sort of at the apex is this trabeculated apical myocardium. And then in the outflow tract is the infant dibula, sometimes called the conus. And that really forms the smooth myocardial outflow region.

The RV inlet itself can be imaged in three different views. It's this green area right here that I've denoted next to the membrane septum. You'll see it in the apical four-chamber view. It's the part of the right ventricle that is right below the mitral valve and the tricuspid valve that forms that area of the septum. You can also acquire it in the RV-focused four-chamber view. And when you're looking at the short axis, it's forming this area right here.

The trabeculated myocardium occupies a large portion of the septum and therefore is visible in a variety of views. It's visible in the parasternal long axis view as the part of the septum that you're seeing the most. In the apical four-chamber view, it's the part of the septum that is probably the biggest part of the septum. And of course, as you're tilting up into your apical five-chamber view, you're seeing the aortic valve, and then you're seeing most of the septum, which is the trabeculated myocardium of the right ventricle. And then superior to that next to the aortic valve is sort of this membranous septum. Sometimes you'll see membranous VSDs.

there. In your RV focus view, you're also going to see it and your short access view is sort of this part of the setting here. The infundibulum is the area next to the RV outflow tract. I've marked that for kind of orange. What you'll note here is that in your apical four chamber, or in your parisinal long axis view, what you'll see is this area sort of intercepted right next to the aorta. Similarly, in your short axis view, that's mostly what you're going to see. You are going to see some membranous septum here, but mostly what you're seeing is this infundibular region, this conus that forms the RV outflow tract itself. The RV anatomically also has three bands to it. The first is the parietal band, which is part of what's called the ventricular infundibular fold.

um and what that forms is uh part of this primary uh it just forms sort of this relationship between the uh between the inflow and the ethical region um uh then what you also have is the septo marginal band that's also sometimes called the septo marginal on trapeculation it has two limbs to it it has this interior superior limb and a um and a sort of posterior inferior limb with the posterior and sort of eventually becoming um interfacing with part of the moderator bands you can see here this ventricular infundibular fold um and then the septo marginal trapeculation and the moderator band itself um when you zoom in and you look at this what you'll note is that you have this ventricular, here's the ventricular fold, here's the septomarginal band, and this is the moderator band there. And that sort of helps us in cardiology to find what sort of anatomically we're anatomically dealing with in terms of ESCs. The walls itself are supplied mostly by the RCA. And the reason why that is, is because in most patients, about 80% of them, the posterior descending artery originates from the RCA, with the lateral wall of the oriental ventricle being supplied by an acute marginal branch off of this RCA.

And what you'll notice, this is sort of what you're seeing when you're looking at it with a point of care ultrasound in the apical fourth chamber view and the apical five chamber view. It's the lateral wall that for the most part is being fed, most people buy the red coronary artery. And similarly, in the peristural short axis, you'll also see that as well. I'm going to show you some angiography films. Let me see if I can get this to play. Yeah. So here what you'll see is you're now performing a coronary angiogram of the RCA. And what you'll note is that you'll note that these kind of vessels that are coming off of the RCA here, those are acute marginal vessels. And then a vessel that's running along the bottom of the heart here, this is the PVA. It's the posterior septum artery. And that's feeding the inferior part of the septum, whereas those acute marginals are feeding the lateral wall of the RV.

This is, again, now you're looking at a little bit of a different projection. It becomes pretty clear where those acute marginals are and how the PDA itself is forming this area along the bottom part of the septum that's feeding the inferior part of the septum. So as I said, the posterior wall and the infraceptor wall is supplied for the most part by the PDA in most people. And the RV-focused view, what you're going to see, or RV-focused four-chamber view, where you'll see that lateral wall, that's mostly, again, supplied by the PVA. And your RV-focused two-chamber view, again, you'll see that kind of inferior wall is supplied by the PVA. In the short axis, you'll note, again, this inferior wall and this posterior wall are all fed by the posterior descending artery. Because the posterior descending artery is running right here along the bottom part of the heart in this interventricular groove, and it's running up towards the apex of the heart. And so it's feeding this area of the wall.

And here's a nice shot of a PDA. What you'll note is this large vessel that's running towards you is feeding the inferior aspect of the septum. So most individuals, as I said, are right dominant. And however, you know, the anterior wall of the heart is really supplied by the blood vessel that's going to supply the septum. And most people, almost all people, that's the left anterior descending artery. So if you remember, the anterior part of the RV, in addition to the LD, is all supplied to the left anterior descending artery. When you're looking at coronary angiograms, what you'll see is the LAD is usually a large vessel. The LAD, because it has to feed the septum, must give off septal perforators. And so whenever you see septal perforators, you know you see the LD.

And it usually wraps around the apex of the heart and splits into two, almost like a forked tongue when you get past the apex. Here, what you're seeing is a large wraparound LED. It's this vessel that runs around and wraps the apex of the heart. For the most part, the infundibulum is supplied by the conal artery that comes off the right coronary artery. About 30% of cases have a separate ostea of this artery. And importantly, sometimes it can accidentally be engaged when you are capping somebody. And when contrast dye is injected into it and includes flow to it, it can prove quite arrhythmogenic. And so in the cath lab, we look very close to make sure we're not dampened when we engage the right coronary artery because you don't want to engage the conus. And if you engage the conus and inject contrast dye, you can fibrillate the patient.

So here, again, this is a nice right coronary artery shot giving rise to acute marginals coming off and a PVA that's down towards the apex and running along the interventricular septum. And you're seeing it in just two different projections right here. And then you can see the conus artery that's coming up towards the top. You don't want to engage. You don't want to engage into this conus artery. It's feeding the conus branch and the RPH flow track. You know, in the 80% of people who, as I said, 80% of the time, PVA comes off of the RCA. And the remaining 20% of time, the posterior descending artery comes off the left circumflex.

And what I'm showing you here is a situation where that occurs. You can see at the very bottom, the PDA is going to be... coming off the left dominant or co-dominant system. You can see this vessel running kind of beneath the LED in the shot. So this is the LED that's running here. Beneath it is the PDA that's coming off a certain place. In terms of the blood supply to papillary muscles, you really have three different bands you have to think about. The anterior papillary is supplied by both the LED and the RCA. There's a tremendous amount of anastomotic arteries that are found in the subendocardial zone in the posterior wall. And it uses the papillary muscles to traverse. Here I'm showing you a large branch of the...

L.A.D. that's getting off an artery that's running through the moderator band and is feeding the lateral wall. It's this big artery right here. The posterior papillary is usually supplied off the PVA, but frequently it receives its supply from the terminal branch of the septal perforator off the L.A.D. LED gives off these septal perforators that run through the septum, and those can oftentimes advance the most to the PDA, to the arteries in the PDA. The moderator band is fed by oftentimes a septal perforator off the LED that runs through the moderator band and really supplies the anterior papillary and the anterior lateral RV free wall. So the RV is fed well and it's fed not only by the RCA, but also by the LED. It's why a lot of times people can survive with, and very frequently do survive, with chronic total exclusions of their right coronary artery.

There is, as I said, a significant amount of anastomotic connection between the left and the right arterial system. Most of this occurs in subendocardial zone and the outer half of the posterior wall. And you can see here in stereotactic radiography of the coronary system, you can see these really impressive anastomotic areas where blood is able to reach the lateral wall of the RCA through anastomotic connections from the LAD. And mostly that's from the, and that also helps be the anterior papillary muscle itself. Fascinatingly, the RV musculature has a conformation that's different from what's in the LV. The right ventricle musculature is composed of both superficial and deep layers. Here I'm showing you a really beautifully dissected heart that shows you the different muscular fibers of both the RV and the LV.

You have superficial fibers that are arranged circumferentially in a direction that's really parallel to the AV groove. And as they sort of near the front of the heart, which is the sternocostal aspect, they take this oblique turn and become the superficial fibers of the LV. You can see they take this turn from the RV and become this very superficial fibers of the LV that are arranged in different orientation. You have a real continuity of muscle fibers between the LV and the RV. serves to functionally bind the ventricle together. And so what happens is that LV contraction therefore contributes to RV contraction because the LV contraction really causes the RV free wall to be pulled inward and contributes this idea of ventricular interdependence. And then while this is happening, while the RV free wall is being pulled inward by the circumferential motion from the superficial fibers and by the motion of the LV fibers, you also have deep fibers in the RV that are serving to longitudinally shorten the RV from the base to the apex. So you have this motion that is both a shortening and a squeezing in.

which is a little bit different than how the LV squeezes. The LV squeezes has actually three muscle layers, which serves to contort the ventricle LV, translate it, rotate it, and thicken it all at the same time. In terms of the hemodynamics of the RV, it's really informed by the muscle layer itself. And that's because the RV pump is really comprised of three movements. You have these circumferential muscle fibers that shorten and cause this RV-free wall to move inward. It's analogous to a bellows that you might find in an old house with an old wood fireplace.

And then you have a longitudinal fibers that shorten and contract, which shorten the RV from in a long axis dimension and moves the tricuspid valve anglers towards the apex. And then lastly, you have this contraction of the LV that, as I said, exerts torsion on the RV-free wall itself because there are just so many points of attachment. And so the RV pumping motion is a very interesting. In general, we talk about cardiac function. We think that cardiac function is dependent on really three things. The first is preload, which is the relationship between end diastolic pressure and end diastolic volume. Preload in and of itself is dependent on a variety of topics, which if you guys are back, I'm happy to talk about, including initial ventricular volume, wall stiffness, pericardial constraint, the compliance of the chest wall, the depth of inspiration, the position of the heart and the chest, the abdominal.

musculature or adiposity, edema in the heart, fibrosis, ischemia, or how long the filling period lasts. All of these influence preload. Contractility is a little bit of a difficult subject to conceptualize, but can be thought of as sort of a load independent measure of intrinsic contractile strength. So that's the contractile strength of the ventricle, not dependent upon this filling process. And it really represents the relationship between the pressure the ventricle generates at any given filling volume on the frank starting relationship. Everyone on this call has probably influenced contractility to some degree with catecholamines or calcium channel blockers or data blockers.

And the heart itself influences contractility by cyclical calcium within the cells themselves. Afterload includes the factors that really oppose the shortening of muscle fibers. There are a variety of different types of ways to conceptualize afterload. Everything is simple as a muscle lifting weights that's represented by Hooke's law. Transmural wall stress is represented by the law of Laplace. Impedance spectra, peripheral vascular resistance, pulmonary vascular resistance, and then also elastance itself. But really, you can think about it as the load the RV must overcome during the ejection of blood. So those three factors all result in changes and changes in any of those three factors will modify.

cardiac function. And then additionally, RV function was modified by RV myofibril movement and the alignment of RV myofibrils. The RV itself is coupled to a low impedance, highly distensible pulmonary circuit. And when you think about it, pulmonary vascular resistance is a lot lower than systemic vascular resistance. And that's because pulmonary arteries are much more distensible than systemic arteries. And the pulmonary circuit has lower pulse pressure reflection coefficient. So unlike in the systemic circuit where

you have this huge reflection of the peripheral wave after pulse pressure generation, which generates a nice big diapodic notch. The pulmonary circuit is a lot more compliant, and so you don't reflect pressure as quickly back from the periphery or as dramatically. Furthermore, right-sided pressures are a lot lower than left-sided pressures, and subsequently, the RV is much more affected by afterload changes. If you overfill the RV, you can distort RV structure and pinch on the LV, which in and of itself will depress the global cardiac function. What I'm showing you here in this graph is the stroke volume on the y-axis and the transmural pressure wrapped on the x-axis.

And what you'll note is that as you dramatically increase pressure, the RV stroke volume falls off really dramatically, whereas the LV can tolerate a wide range of pressure changes. And this is kind of intuitive to people. When you've seen someone, you probably have seen people in clinic who have sometimes had blood pressures of 160 and sometimes had blood pressures of 120. But if you were to change your RV, your pulmonary pressures by 40 millimeters of mercury, those people would be in the ICU of some kind. RV hemodynamics is interesting because the RV fills and ejects differently than the left ventricle. The RV will start filling before the LV. And initially what happens is that the RV pressure will peak rapidly and then decline rapidly.

RV also has a isovolumic contraction time here that's labeled as your PEP or the pre-ejection period. And in the RV, that's a lot shorter than the LV. And that's the reason why that is, is because the RV has to generate pressures a lot less than the LV has to. So rather than the LV having to generate a pressure of 120 to 140 or 160 before the aortic valve opens and it begins to eject, the RV only has to generate a pressure of 20 or 30 before it ejects. Most fascinatingly, the RV has this period called a hangout interval. At Duke, everything is about basketball. And so we think about this as sort of the fadeaway jump shot. So a basketball player jumping up into the air, releasing the ball and the ball still being in motion as the basketball player lands. What happens is in the RV, you continually have flow into the pulmonary circuit, even after the RV pressure is lower than the pulmonary pressure. And so what happens is you have this end systolic flow that continues even in the presence of a negative and tricular arterial pressure gradient.

And that's really due to the momentum of blood from the RV into the PA. So how do we image the RV? Well, we image it. We have to assess all of these different parameters. You have to assess the RV structure, the preload, the contractility, the afterload, and importantly, the relationship that the RV has with the LD, because that in and of itself is very important.

Well, what makes an RV an RV? An RV is more apically displaced. It has an apical hinge line of the tricuspid valve septal leaflet relative to the anterior mitral valve leaflet. All that means is that the tricuspid valve is more apically displaced than the mitral valve. The RV has a moderator band. The RV has greater than three papillary muscles. And then the tricuspid valve has the word trine. So it has tri-leaflet configurations and it has septal papillary attachments. One of the first things I learned when I started cardiology fellowship was that the RV is septophilic. The LV is septophobic. And so if you see papillaries attached to the septum, it's the RV.

And then there's these very coarse trapeculations in the RV that is not present in the LV, excluding something like LV. But the geometry of the RV really complicates imaging. You know, you can take an apical four-chamber and cut the heart sort of along this yellow line and generates apical four-chamber imaging. But here you miss out on a tremendous part of the conus. Alternatively, you can do a kind of an RV-focused four and you cut along this line. But again, you'll miss out on the conus as well.

Well, you can do a basal short axis view, in which case you'll catch the RA and maybe the conus, but you'll miss out on the rest of the RV. Well, you can use the short axis view in general. And again, you'll see maybe a little bit of the tricuspid and the inflow, but you'll miss out on the conus or other aspects of the inflow and mandibulum. And so really what we have to do is we have to reconstruct a three-dimensional picture of the RV in our minds from multiple different views. I'll give you some structural measurements of the RV for reference of what a normal RV is. I'll warn you that most of these are obtained from cardiac MRI, which is a great way of imaging the RV if your patient can tolerate it. A normal RV has an end diastolic volume of about 75, a mass of about 26 grams, and a free wall thickness of anywhere from two to five millimeters of mercury. And as I said, you should see the inflow region, the trapeculated myocardium, and the infundibulum, with an infundibulum accounting for anywhere between 25 to 30% of the RV volume, and frequently it's missed on some of our point-of-care imaging modalities.

And so therefore, like a lot of these views, as I said, are really practically more obtained on cardiac MRI, which can be difficult in our critically ill patients. So practically, how do you assess it? Well, you know, I tend to look for dilation. If you see an RV volume greater than 100 milliliters of mercury or milliliters per meter squared, that is volume overload. Or an RV max short axis distance of 43 millimeters of mercury is concerning for pressure overload. But functionally, what you'll be doing is looking for a D-shaped septum and a D-shaped LV. So if the LV is kind of D-shaped and has an eccentricity index greater than one, you have either RV pressure or volume overload or both.

Pressure overload is defined as a systolic D-shaped septum, and volume overload is a diastolic D-shaped septum. And this sort of makes sense, right? Because the biggest volume that the RV and the LV will have will be during diastole, and then the most pressure that both those chambers are going to generate are going to be during systole. And so if you have pressure overload, you'll have a systolic D-shaped septum. If you have volume overload, you'll have a diastolic D-shaped septum. How you compute an eccentricity index is what you'll do is you'll take the minor axis diameter of the LV parallel to the septum.

and then you measure the minor axis of the LV perpendicular to the septum, and then you divide the two. And so what you can see here is you see eccentricities are both greater than one, although that is concerning for pressure and volume overload to the RV itself. You also have to assess diastology. That can be very difficult because the RV filling occurs in different phases, and it's kind of hard to assess with one particular parameter. The RV and diastolic pressure or RA pressure. I'll give you a hint. RA pressure itself, RV volume, the RV filling profile, or relaxation indices, which is the time constant or isovolume pressure decay, or lastly, RV pressure compliance, which really does require a knowledge of RV pressure itself. All those can help you in assessing diastology. So how do you assess an RV and diastolic pressure or an RA pressure?

Um, invasively, if you put a swan in someone, it's a really great way of assessing what your RVN diastolic pressure is. Um, and I've given you some normal values of what your normal RA mean or a normal RVN diastolic pressure should be. Um, by echo, you can use inferential measurements. Um, this morning, I think we spoke a little bit about IVC diameter and collapsibility and the tricks that you can run into, uh, and the tribulations you can run into with, um, by just using this metric alone. Um, you can also look at the ratio of, um, uh, of filling to tissue movements, uh, which is the EDD prime or, uh, filling, uh, early filling to sort of, uh, facial contractility filling.

And an abnormal E to A ratio on echo is less than 0.8 or greater than two. An abnormal E to E prime is greater than six. What an abnormal E to E prime represents is that the big E represents the volume of blood movement and the little E prime represents tissue movement during diastole. So you can imagine if the tissue is not moving much, but there's a lot of blood that's rushing into the RV from the RA, there's a high RA pressure. That means there's a high RA pressure gradient. And if the tissue is not moving, all of that blood is being rushed in because the, not because the ventricle is relaxing and sucking it in.

but because the pressure in the right atrium is so high because you have a stiff ventricle or a stiff atrium. And then similarly, that sort of also applies to your E to A ratio, where, you know, if the E to A is particularly low, that means you're relying mostly on your atrial kick to generate ventricular filling. Or if your E to A is super high, what that indicates is that most of your filling is occurring early in diastole because your right atrial pressure is low. And the ventricle is just so stiff because that's the diastolic abnormality that atrial kick is not helping you out too much. You're not actually getting that much blood into your atrium from the atrial kick.

You can also look at this e-deceleration time. It's abnormal if it's less than 119 or greater than 242, although some sources will say if it's less than 160, it's abnormal. What you can imagine is that flow between the atria and the ventricle will equalize really quickly if there is not much of a pressure gradient between those two chambers. So if you have a diastolic abnormality and your right ventricular pressure is very high during diastole, what will happen is you will very quickly equalize those pressures. You can also look at the flow in the hepatic vein. Theoretically, you should have more flow during systole and diastole.

But you'll have a reversal of systolic flow in severe MR or severe DR or severe diastolic dysfunction. Diastolic flow really predominates in hepatic veins, which is when that happens, that's concerning for high radiatrial pressure. So if you're seeing most of your flow that's through the hepatic veins and feeling the radiatrium occurring during diastole, that's where most of your flow is occurring there. That's really concerning that your radiatrial pressure is high. You're not able to have any systolic filling in the radiatrium.

In general, in the ECHO labs, we'll look at the IVC in a subcostal view. In a patient who's supine, it will measure one to two centimeters from the radial junction. We use a cutoff of less than 2.1 with a 50% collapsibility with a small SNF, corresponding to a radial pressure of three. An IVC of 2.1 with less than 50% collapsibility or an IVC of greater than 2.1 with 50% collapsibility with SNF, giving us a pressure of eight. And if the IVC is plus four, greater than 2.1 and doesn't collapse, that's indicative of a radial pressure of 15.

A caveat emptor to this is that you should not use this in mechanically ventilated patients. And if you breathe in deeply enough, any one of us can collapse our IVC regardless of how much blood or fluid is on board. I'll show an example of this that I showed this morning. These are two examples of two different people. One, you can see IVC dilation with inspiration. And one, you can see IVC collapse. And when you ask yourself which one is positive, you have to, you know, if you were just showing these two images, you might be fooled into thinking that it's this patient on the left with the IVC collapse that is, quote unquote, positive.

What I'll show you is this is actually me. So this is an experiment I did where I drank two liters of water and then went to the ICU and had someone ultrasound my belly. And I could, you know, with a deep enough sniff, collapse my IVC despite my volume status being high. And the patient on the right is from an original study. This patient was mechanically ventilated with about 10 cc's of tidal volume. They were paralyzed. They were relaxed. All you can see is during the end of inspiration with IVC dilation as your SVC and your IVC are compressed by increasing intrathoracic pressure and back pressure causes engorgement of the IVC, which was predictive of volume response in this study.

So the cardiopulmonary interactions do play a role in assessing for radiational pressure or radiational volume. So you can see that. And so which one is positive, that would be the one we write. In terms of looking at contractility, one of the things that you can do is, you know, the geometry of the RV is so complex and the RV myofibers are arranged in such a unique way that are different from the LV. It really makes assessment RV function difficult. You can use some really nice inferential measures. One thing that's very, very helpful is if you just acquire a RV short axis view, right? So you see the tricuspid valve banging out, the pulmonic valve is hanging out here. And you'll notice that you really see disappearance of the RV outflow tract during systole.

That means that the RV is moving vigorously, and you can think about that as maybe an RV that is less dysfunctional. And so it has good system function or contractile function. One thing you can also look at is how vigorously is the RV itself moving? And to do that, you pick a point that you know exists and look at how much that's moving. That is traditionally looked at as a tricuspid annulus. And so you can see in this view, the tricuspid annulus is moving up and down, and the RV-free wall is coming in robustly, which also helps you understand that maybe the RV is doing well and is not as dysfunctional.

Quantitatively, you can look at an RVEF. Again, the RVEF is going to be very dependent on loading conditions. It will integrate views of contracts. It offers you an integrated view of contraction load. And because the RVE is larger than the LV, the RVEF is going to be less than the LVEF because you have to keep stroke volumes equal. Blood flow into the heart needs to equal blood flow out of the heart. Otherwise, you have some shunt physiology going down there. In general, a RVEF less than 45 is considered abnormal.

Unfortunately, the EF that we derive from echo only has a very modest correlation, 0.65, with the RVEF that is derived from MRI views. And again, a lot of that's due to loss of the pictures of the infantibular, sorry, in the conus region. Quantitatively, you'll often see reported as the fractional area change. What that is, that's a ratio of the systolic area change, the diastolic RV area, with the fractional area change being the N-diastolic area minus the N-systolic area divided by the N-diastolic area. Again, just like the EF, it's highly dependent on loading conditions and offers you an integrated view of contraction and load. This does reflect both the radial and longitudinal contributions of RV contraction, but doesn't really take into account the infundibular contribution, which again, if it's 30% of the volume, can be substantial.

We say a fractional area change less than 35 is indicative of RV systolic dysfunction. And this is one you can do. You can get 3D RV function from a TTE. And on this, you can do a fractional area change. And again, this is something that your machines, either a GE or your Philips, will report out. They'll report out an RVDF. They'll also report out a RV fractional area change of here on this patient's 42. I don't know if a lot of the POCUS machines in the ICU have the ability to do this, but definitely some of our more formal echoes do.

In terms of quantitative measures of function, the one that you guys are probably the most comfortable with using, the one that's probably the most common in the report, is that tricuspid angular plane systolic excursion, or the TAPSI. What that's doing is that's measuring that longitudinal movement of that point that you've picked, that tricuspid valve. And really, although it incompletely captures the complex pumping pattern of the RV, it's probably a pretty easy one to look at. Unfortunately, it assumes the displacement of a single segment really represents this complex pumping motion and complex 3D structure. As a result, sometimes a correlation between the RVEF and the TAPC is actually quite poor in some studies. And a lot of this has to do with the fact that it can be really inappropriately taken. And so if you have off-axis measurements, you can really underestimate the TAPC. And again, like the FAC or like the RVEF, this is really dependent on the load that the RV is experiencing. At the bedside, it can be very useful as a simple measure of estimating RV function. I tend to say a TAPC less than 1.6 is concerning for impaired RV systolic function.

And this is what TAPSE will look like. What you'll do is you will put your M-mode cursor through the tricuspid annulus, and you will push the M-mode button, and you should see these nice sine wave-like motions. And you'll measure between the tallest point and the lowest point of the valley in the trough, with, again, a value of less 1.6 than the low being concerning for Harvey's systolic dysfunction. Again, sort of a buyer beware. If you go a little bit too medial, what can happen is you can actually catch the tricuspid valve leaflet itself, which is a freely moving structure.

And so as a result, you can overestimate taps here and so you can fold yourself. So you really want to make sure you're right on that tricuspid annulus and not on the leaflet. Other quantitative measures of function, the other one that we commonly do will be a tissue Doppler measurement at the tricuspid valve leaflets, or sorry, tricuspid valve annulus rather. And what you'll look at is you'll look at the maximal systolic velocity. So now you're directly measuring tissue movement using your ultrasound. And what you'll do is you'll click the TDI button, you'll place your pulse wave Doppler over the tricuspid annulus, and you'll press pulse wave Doppler. And what that'll do is that will give you a curve that looks like this. And what you'll do is you'll measure up here. If it's greater than 10,

it's helpful in believing that the RV is functioning normally. In general, it's really easy to measure, it's reliable, it's reproducible, and it really correlates well with other global measures of RV function. It's important that you have to keep the basal segment and the annulus aligned to avoid velocity underestimation. And again, like the TAPC, it assumes that the function of a single segment is reflective of the whole ventricle. And it really does incompletely capture that pumping motion of the RV, which is both a longitudinal displacement as well as a contraction in words like a bellows. And again, as I said, less than 10 is indicative of systolic dysfunction, but lower can be normal in elderly patients.

Another thing you can do if you really want to get fancy, and this is not something that is typically reported on echo, but it's something you can easily do at bedside, is something called the RV index of myocardial performance or the RIMP. Sometimes you'll see it reported as the Tay index. This is the ratio of the time that the RV spends in isovolumic contraction versus over the time that it spends ejecting blood, with the thought being that the longer it's taking to generate pressure or relax, and the less time it's spending ejecting blood is worse. And so it really reflects the relationship between ejection periods and non-ejection periods. It can be calculated in really two ways. It's the isovolumic contraction time plus the isovolumic relaxation time divided by the ejection time, or the time the trituspid valve is closed minus the ejection time divided by the ejection time. It is independent of preload, upload, and heart rate, but you have to take care of measuring it. You have to ensure non-consecutive beats have similar RR intervals to account for similar isovolumic contraction times and isovolumic relaxation times between beats. It can really be falsely low in conditions where there's elevated PA pressures that shorten the isovolumic relaxation time.

In general, a RIMP graded 0.43 by pulse wave Doppler, 0.54 by DTI, which is tissue Doppler, really indicates artery dysfunction. Here's how you measure it by pulse wave Doppler. What you'll do is you'll pulse just the tricuspid valve leaflets, and then you'll pulse right before the pulmonic valve leaflets. The tricuspid valve leaflets will give you your total contraction time, and the pulmonic valve leaflets, what you can do is you can look here and see your total ejection time, and you can subtract the ejection time from the time the tricuspid valve is closed, and then divide by your ejection time to get a RIMP, and that is the one that should be greater than 0.43. And then on a single beat, what you can do is you can, again, do pulseoid dopplers over the tricuspid annulus, and you can measure the isovolimic contraction time and isovolimic relaxation time and the ejection time. Or you can just measure the total contraction time and separate out the ejection time.

If you want to assess afterload, you can very easily assess PA pressures, or at least estimate them in an echo. Your systolic PA pressure will be your peak TR velocity. That's what we oftentimes record it. If you remember Bernoulli, he postulated in a moving fluid, pressure plus half of the density times V squared is constant everywhere. And the pressure gradients, therefore, must equal to half the density of blood times difference in velocity squared. Or V2 is a distal velocity, and V1 is the proximal velocity. We generally ignore V1. We know what the density of blood is.

If you look at the formula, 0.5 times 0.76 is roughly about 4. And so we in the ECHO lab use a simple Bernoulli equation, which is a change in pressure is going to be equal to 4V squared. So simplified Bernoulli really doesn't neglect the inertial components of the completed Bernoulli equation, but it does allow us some useful measurements at bedside. It allows us to very easily estimate RVSP by imputing the peak TR jet velocity into a simplified Bernoulli equation and just adding what we think our RA pressure is. In general, TR velocities are normally less than 2.9. In the absence of any gradient across the pulmonic valve, which is usually fair to assume, your RVSP should equal to your systolic.

your peak pulmonary systolic pressure. You want to use the highest velocity TR signal on CW Doppler from multiple windows. You can also estimate the diastolic pressure, which is the N-diastolic pulmonary regurgent jet velocity, again using the simplified Bernoulli equation, although it does neglect inertial components of blood, with your PA diastolic pressure being equal to four times your N-diastolic pulmonary regurgent velocity squared plus your RA pressure. And then you can combine both of those elements of prior data to get your mean pulmonary arterial pressure. One thing that is very helpful to do too is what you can actually do is you can look at the pulmonary acceleration time in pulse wave Doppler and systole. You'll just get to, what you'll do is you'll get a short axis view of the heart. You'll pulse wave Doppler right at the level of the pulmonary valve. And then what you'll measure is how long it takes to go from lowest pressure to highest pressure. And if your acceleration time is less, or lowest velocity to highest velocity, and if your acceleration time is less than 100, that's sort of abnormal and is concerning for high pressures. This is a patient I saw, which was a 56-year-old guy with massive PE. Here you can measure CW Doppler through the TR jet to give you a max velocity from the TR and a max.

pulmonary pressure. This is a patient who was mechanically ventilated. What you can see in the IVC is a large end up being tumor in this person's IVC. He had renal cell carcinoma. And what you can see is that you don't really hear when you do CW Doppler through the pulmonic valve in this patient. We didn't see any regard to JET.

What we were able to do is also do pulsoid Doppler right at the pulmonic valve. And what we can measure is you can measure the Doppler profile of blood flow through the pulmonic valve. And you can measure this acceleration time from the start to the peak is over 100 milliseconds. So it's less concerning for pulmonary hypertension. And so in this patient, when you ask what his RVSP is or what his pulmonary pressures are, you can tell that his RVSP is not particularly high. Your IVC assessment is found by mechanical ventilation. But in general, his TR velocity is less than 2.9. And his pulmonary acceleration time is over 100. And so it wasn't like this person.

It wasn't like this person had even a massive PE, which is what we were originally building and taking care of it. Assessing the RV's relationship with the LV, the RV, as I said, is mechanically coupled to LV contraction. That's why we've seen McConnell signs. It's the point where changing chamber volume in one chamber is really going to affect the pressures and the volumes in the contralateral chambers. Most of that's due to pericardial constraint. This is a nice article from Barry Borlaug, which shows that in acute RV distension, what ends up happening is your LV pressures increase for any volume. And in acute LV distension, the same thing occurs in the RV, where the RV pressures at any given volume are higher. And so both of these chambers' volumes and fillings really do influence each other.

This is similar with similar articles, similar research in Barry Borlaug, which I will brief over in the interest of time. You can see how in situations where the LV is large, dilated, poorly functional, it can impact on the LV or impact on the RV. And similarly, when the RV itself is large and dilated, poorly functional, it can impact the LV as well. And the reason why this happens is because pericardial pressure increases more steepening with left heart filling at higher heart volumes, which really can demonstrate how the RVL interdependence alters chamber stiffnesses. That's why in heart failure, diuresing is not just something that relieves the breathing, but also something that improves pressure because you're improving and optimizing filling conditions in both chambers.

What you want to look for is you want to look for the degree of reciprocal changes in ventricular filling profiles. You want to look for ventricular coupling and dimensions and pressures, and you can look for a normal septal motion or effect on the other ventricle. Here you see a patient in tamponade, where as the LV is getting bigger, the RV is getting smaller. That's a person who needs their pericardial space strain, either surgically or with a catheter. So in conclusion, the RV is a really complicated ventricle, and the geometry is complex and necessary for cardiac function. And its function is dictated by structure. Its relationship to the LV is preloaded after the contractility.

Echo, while a powerful tool in assessing the RV, is not perfect, but it does help us assess the RV accurately and quickly. Thank you, guys.

Beyond Hope Project with Jason Tharp Beyond Hope Project Welcome to 'Beyond Hope Project,' a beacon of inspiration in the podcast world. Join Jason Tharp as we embark on a transformative journey, exploring stories that awaken the will to start anew and find the strength to rise from setbacks. 'Beyond Hope Project' is about lighting the way to your starting line, not dictating your path. We delve into narratives that foster optimism and belief in a future where dreams become achievements. Each episode is a tapestry of positivity, enthusiasm, and comforting support, resonating with the essence of hope. This podcast goes beyond storytelling; it's a movement of positive change rooted in authenticity and transparency. We provide real tools for real journeys, infusing more hope and joy into the world. 'Beyond Hope Project' stands as a testament to the transformative power of hope and the limitless potential of the human spirit. Join us in transcending boundaries and breaking barriers. Here, we prove dai Veteran Chat Project Kyle Turner Our goal is to reach as many Veterans as we can. We noticed a lot of the podcast personalities tend to be unrelatable to the every day joe. Not taking anything away from anyone just hoping to give more people a place to feel connected to something. KZ and Kyle are Army vets who deployed together for OIF 07-09 and OND. Now close to 15 years later we are finding a way to open up about our issues, and find a way to build a community. Paramedic Philanthropy Project Melissa Ade Podcast by Melissa Ade Bigfoot Information Project Podcast Bigfoot Information Project Occasional conversations with leading researchers and investigators regarding the animal commonly referred to as bigfoot.

Frequently asked questions

When was this Maryland CC Project episode published?

This episode was published on July 6, 2023.

Is there a transcript available for this episode?

Yes, a full transcript is available for this episode. You can read the complete transcript on the episode page.

Can I download this Maryland CC Project episode?

Yes. Use the download control on the episode player to save the publisher-provided media file.