Skip to content
ASML EUV Lithography Systems episode artwork

Nov 10, 2026 1 hr 3 min

ASML EUV Lithography Systems

from The Innovation Attorney Podcast Hosted by The Innovation Attorney

ASML EUV lithography systems are the only production tools printing leading edge chip features with 13.5 nanometer light, and ASML guided 2026 net sales near $50 billion. The company reported third quarter 2026 net sales of $13.0 billion, a gross margin of 57.5%, and EUV system sales of $4.6 billion, then guided full year net sales to between $49.1 billion and $50.2 billion. Sources 1 and 26. A low NA NXE:3800E scanner, where NA means numerical aperture, rates 195 to 220 wafers per hour at a price between $180 million and $300 million; a High NA EXE:5200B scanner resolves about 8 nanometers at a price near $380 million to $400 million. Sources 13, 15, 17 and 27. The light source sets the engineering agenda of 2026. ASML raised its tin plasma output from 600 watts to 1,000 watts in February 2026; ASML technologists project a path to 330 wafers per hour per tool by 2030 from about 220 today. Sources 18 and 19. High NA availability reached 84% in July 2026 against a 90% target for the fourth quarter; Intel reports more than 1 million wafers exposed on High NA tools. Sources 16 and 26. A scanner priced near $400 million is judged by how often it runs. The cost comparison that decides most High NA purchases comes from IBM: a single High NA exposure costs roughly 2.5 times a single low NA exposure, so High NA lowers cost only where it replaces three or more low NA masks. Source 14. ASML management stated on October 14, 2026 that planned 2027 and 2028 output will not fully meet customer demand, with low NA EUV and immersion capacity rising 30% in 2027. China is guided at about 20% of 2026 net sales, down from 33% in 2025. Sources 17 and 26. Buyers and shareholders alike are reading a supplier whose order book runs ahead of its shipping schedule. What Is EUV Lithography and Who Sells It? EUV lithography is a projection printing process that uses 13.5 nanometer light from a laser produced tin plasma to expose patterns onto photoresist coated silicon wafers inside a vacuum tool. Sources 6 and 27. EUV names the band of light near 13.5 nanometers, far shorter than visible light or the 193 nanometer light of earlier scanners. The wavelength is 14 times shorter than the 193 nanometer light of immersion deep ultraviolet scanners, a ratio calculated from the two wavelengths, and photons at 13.5 nanometers carry about 92 electron volts of energy. Source 27. The engineering classification is optical projection lithography built on three domains of physics: plasma physics for the source, multilayer thin film optics for the reflective imaging train, and photochemistry for the resist. No material transmits 13.5 nanometer light in useful amounts. Every optical element is therefore a mirror, the mask is reflective, and the entire light path runs in vacuum with a low pressure hydrogen atmosphere around the source collector. Sources 8 and 27. ASML is the only company that sells production EUV scanners. It started in 1984 as a joint venture of Philips and Advanced Semiconductor Materials International, shipped its first prototype EUV tool, the NXE:3100, in 2010, and shipped its 100th EUV system in 2020. Source 11. Competing source and tool concepts, including a free electron laser effort in the United States and a government backed prototype program in China, remain at the prototype or financing stage. Sources 28 and 29. The market has one seller. Which Scientific Principles Set the Limits of EUV Lithography? Resolution in projection lithography follows the Rayleigh relation: critical dimension equals k1 times wavelength divided by numerical aperture, and EUV improves it by shortening the wavelength and by raising the aperture. With a process factor k1 near 0.32, the calculation gives 13.1 nanometers at 0.33 NA and 7.9 nanometers at 0.55 NA, which matches the 13 nanometer and 8 nanometer figures published for the two platforms. Sources 13 and 16. Depth of focus falls with the square of the numerical aperture, so High NA forces thinner resist films. Source 14. Two physical facts fix the 13.5 nanometer wavelength. Tin plasma emits strongly near that wavelength, and molybdenum and silicon multilayers reflect it. A molybdenum silicon mirror uses 40 to 50 layer pairs of about 3.5 nanometers each and reflects about two thirds of the incident light at its peak, with a theoretical limit near 75%. Sources 24 and 27. An optical train of about nine reflections passes a small fraction of the source light: 70% reflectivity per surface leaves 4.0% after nine reflections, a calculation that agrees with published analyses putting total mirror absorption near 96%. Source 27. Most of the light never reaches the wafer. Conversion of laser energy into in band EUV light reaches only about 5% to 6%. Source 27. Photon statistics impose the hardest limit. At ASML’s rated dose of 30 millijoules per square centimeter, about 20 photons strike each square nanometer, a figure calculated from the dose and the 92 electron volt photon energy, and Poisson noise in the absorbed count produces line roughness and random defects. Sources 9 and 21. The noise comes from the light itself. The fundamental constraints are the 13.5 nanometer wavelength tied to the multilayer, the photon shot noise at a given dose, the low conversion efficiency of plasma emission, and the diffraction relation among wavelength, aperture, and focus depth. The contingent constraints are source power, pellicle transmission, mask blank defectivity, and the half size exposure field of High NA optics. ASML moved source power from 600 watts to 1,000 watts in 2026. Pellicle transmission has risen from 83% to above 90% in reported Mitsui Chemicals work. Mask blank defectivity carries a limit of fewer than about 0.1 phase defects per square centimeter. Sources 18, 20 and 24. How Does an EUV Scanner Turn Electricity into a Printed Wafer? An EUV scanner converts electrical power into laser pulses, laser pulses into tin plasma, plasma emission into a patterned beam, and that beam into a latent image in resist. A TRUMPF CO2 laser amplifies a pulse of a few watts more than 10,000 times across five amplifier stages to tens of kilowatts of average power. It strikes tin droplets 50,000 times per second. Source 6. The 1,000 watt configuration uses about 100,000 droplets per second and two shaping pulses ahead of the main pulse. Sources 18 and 19. Every pulse consumes a droplet. High NA optics change the last stage of that chain. The EXE platform uses anamorphic magnification, which halves the exposure field to 26 by 16.5 millimeters from 26 by 33 millimeters, so large dies need two stitched exposures. Sources 16 and 20. Zeiss states that High NA optics are about seven times larger in volume and weight than current EUV optics, with each mirror weighing several hundred kilograms. Source 7. Ownership of the supply chain explains much of the architecture. Zeiss makes the optics, and ASML paid about $1.1 billion in 2016 for 24.9% of Zeiss SMT. Source 5. ASML acquired the source maker Cymer in 2013 for about $2.5 billion in stock. Source 23. AGC and Hoya supply most EUV mask blanks, and Lasertec is the only commercial maker of actinic inspection tools. Source 24. What Throughput, Overlay, and Power Figures Do EUV Scanners Deliver? The NXE:3800E is a 0.33 NA scanner that ASML rates at a 30 millijoule per square centimeter dose, with published throughput running from 195 wafers per hour, upgradable to 230, to about 220 wafers per hour with field upgrades. Sources 9, 15 and 18. The spread reflects dose and configuration. Overlay is 0.9 nanometers or better. Source 15. The NXE:3800F, rated at 260 wafers per hour, begins small quantity shipments in early 2027; the NXE:4200G is planned for 2030 to 2031 at 300 wafers per hour or more. Sources 15 and 26. The EXE:5200B is a 0.55 NA scanner with 8 nanometer resolution, rated at 175 wafers per hour in the best mode and 135 wafers per hour with stitching, with overlay near 0.7 nanometers. Sources 13 and 15. A separate account puts stitch… This is a public episode. If you'd like to discuss this with other subscribers or get access to bonus episodes, visit theinnovationattorney.substack.com/subscribe

Episode details come from the podcast's RSS feed.

Embed this episode

Ready to play

ASML EUV Lithography Systems

0:00 1:03:40

No transcript yet.

Requests help us decide what to transcribe next.

Frequently asked questions

How long is this episode of The Innovation Attorney Podcast?

This episode is 1 hour and 3 minutes long.

When was this The Innovation Attorney Podcast episode published?

This episode was published on November 10, 2026.

Can I download this The Innovation Attorney Podcast episode?

Yes. Use the download control on the episode player to save the publisher-provided media file.