Hey Slip Angle listeners, Abe here. Wanted to let everyone know that I'll be traveling to Barber Motorsports Park this weekend to record shows with as many people as I can possibly connect with. We've got about 18 to 20 GLTC drivers at the event and they're going to be even participating in a GLTC fun race. But I'll be recording shows, hanging out, and if you hear this message and you find me in the paddock, let me know and I will give you a free t-shirt. Looking forward to seeing you there.
We've got Rob Fields on the show today on his 8.30 p.m. lunch break for the day. Hardest working man in Ohio this afternoon. What's going on at the shop and how are things and how many businesses are you in charge of right now? So things are good. Things are busy. And I think we're in that spot that I think a lot of people in the motorsports industry hit where January 2nd, the effects of celebrating the new year have worn off a little bit. We've all kind of looked around to realize the...
the lack of schedule between us and all the stuff that we got to get done in this year and, and getting hard to it here. So, um, I think that's many industries. So that's, uh, that's the problem with, with the holidays is you get this like, you know, either two days off or 10 days off or whatever. And then you're like, ah, that was nice. And then you like go to work and you're like, crap. One of the things that's true in both your business, Adam, uh, as well as mine, uh, despite how much time you take off of work, uh, it's not actually a vacation. The work is still there for you when you return.
Yeah. And then, and then if you're dumb and you start multiple companies with your friends and then you've got emails and podcasts to do and yeah. And then you just worked with a few days you were off. So, but yeah, how's, how's things in Ohio right now? Is the weather pretty good there? It is. We have recovered from the, the, the great cold death of the last couple of weeks, but. Did you guys get below zero? Yeah, we did. We were without wind chill. We were right around zero. And then obviously the wind was a big factor, but we, when that first, when that weather system first rolled in,
We needed to test if ABS was working on a car, and we had this perfect golden window before it got too cold, but it had a bunch of snow on the ground, and it was very effective testing for ABS. That would indicate. How's building cars and maintaining cars, and what's the current state of the business right now? You've been on a couple shows this year, and you've also talked at the beginning of a bunch of them, so what's new with you guys? Up until basically this week, we've been doing two things. Fields Auto Works builds whole turnkey chassis packages, right? And that's going really well. We've got the team there has continued to grow. We've had some really good sales success, brought on board our first dealer and working with a couple of them now.
So that's been really good. The other side of the businesses has been Fields Engineering, which was kind of a catch-all for all of our motorsport activities, all of our engineering activities. That's where Colton Wade's RGR program has been housed. So one of the things we're doing, basically effective yesterday, January 1st, we're separating our motorsports operations from the engineering firm. And so that'll be under Fields Feltwell Autosport.
or FBE Autosport, you'll see it branded. And website's going live for that, all that stuff's coming up. Basically, that'll be our prep shop, our custom build, our trackside support services. If it's going to the track and it's not a Fields Auto Works product, it probably falls under FBE Autosport. And then Fields Engineering is going to distill its focus down a little bit on some of the engineering projects we have that serve major OEs or other industries. We've helped out with some aerospace stuff, some medical stuff. So this will give...
engineering an opportunity to grow beyond just the motorsports industry and also allow our motorsports operations to have a more pure clarity of focus. That's a good idea. Branding it in a little more pitchable way if you're outside of just automotive makes a lot of sense. Well, not to drag our automotive podcast into other areas, but I've been fortunate to have a lot of interest and passion outside of the sport that has also led to some business success, and I need a vehicle to pursue those things as well. Can you talk about much of what that stuff is? Some, absolutely. So my background prior to going full-time with the motorsport stuff, I had an aerospace engineering background and a career in that.
And then from there went into some aerospace program management and supplier relationship management. So I've been very fortunate to have a master key to a couple thousand aerospace shops around the country at one time. And that was really informative for what I decided I wanted to do when I grew up. And if I ever get there, I'll be sure to be sure to do that. Yeah, I think in terms of field engineering's current projects outside of the automotive industry, and I should specify we do some research type or development type work within automotive that isn't necessarily motorsports. But outside of that, we do some custom prototyping type fabrication work and some engineering consulting. Nothing like confidential or no black programs or anything like that at the moment, but all stuff that we're kind of keeping a little bit of discretion on for our customers.
Yeah, that makes some sense. Your firm didn't kill all those people back in India, did that? No, no. Christmas vacation line. The first couple of Cardinals are in the hands of their owners now, I believe, aren't they? They are. You guys are building cars, man. That's awesome. I know. Sometimes it's hard to remember that if we just build and deliver all the cars that we've sold,
We'll be in like the top one third of production volume of all the car manufacturers listed on Wikipedia. Oh, really? When we started Fields Auto Works, you know, my dad was a tremendous realist about the challenge we were undertaking. And his advice to me was something along the lines of the landscape is littered with the burning carcasses of small car companies who never made their first model. Don't, you know, don't get sucked into that. Don't take the approach of trying to.
uh market something you don't have but rather start with start with the car get something that does everything we say it will do and then go sell that and that served us really well um you know we don't don't have the name recognition or the the branding um to where i think we need it to be to be successful long term but um starting from a place of strength on the performance of our product is is definitely an advantage to get there Yeah, I mean, you're definitely building like a kind of a boutique track car in the Cardinal, but you're diversifying a little bit with your next offering, which I hear is making some strides. What have the holdups and the hardships and the lessons been in building boutique track cars? Like what kind of things have you tripped up on and what have you learned? Sure. I think...
And this is a double-edged sword, but the number one thing for me has been to really rely on the people who know what the hell they're doing and have proven it, right? I've been very fortunate that, at least in the first year or so, I kind of made a point of being the least experienced person in the business at Fields Auto Works. Everybody that we brought in or we partnered with or who contributed to the project came with, you know, decades of... various motorsport experience and a background that um you know provided a depth that we could rely on um and so that that is i mean you know involving the right people bringing in the right experience um kept us from hitting so many more pitfalls than we frankly should have in this process just um you know getting the development done to where it's at uh the the flip side of that the the thing that i i you know a hard learned lesson was that um
You know, not everybody is the right person for that. Right. There might there might be people who you get along with or have great reputations or, you know, there are people that everyone around will point to and kind of go, well, that's the guy for this process or that product or that whatever. And sometimes sometimes that doesn't that doesn't pan out. You know, we we've stepped in that trap a couple of times where, you know, maybe the gut feeling was this isn't.
pin it out and everybody goes, well, yeah, that's the person. You got to go with that person. It doesn't matter if it doesn't feel like it's working out in the end. Yeah. Sometimes the smartest people in the room don't translate into things actually happening.
I wouldn't know. I've never been the smartest person in a room. Well, I mean, you're talking about, you know, if you've got the person for something, sometimes they're not always the one that follows through. But, yeah, that's cool. The cars are getting delivered, and it looks like you're making good progress on the Scioto. Scioto? Scioto? I can never say it right. I did drive across the river the other day and texted you. There you go. Yeah, no, I remember that. It's Scioto. Scioto, Scioto. Yeah. And, you know, when we picked that name, we kind of fully prepared to be.
Like, all right, well, you know, it's going to get pronounced however the hell people want to pronounce it. But it's the name of the river that runs through our town here. You know, we're kind of Ohio-centric with our naming. You know, the Cardinals, the State Bird, and the Siders of the River that runs through town here. We've resisted any temptations to call anything a Buckeye, and I think we're going to stay off of that for a while. It's probably not the worst choice. Yeah, that car is so gorgeous on paper. How is it looking in real life? Where are you guys at? So, in real life, it's looking really good. I will say...
You know, another lesson that we learned on the Cardinal was, and we didn't necessarily have a choice based on where we were as a company at the time, but the lesson we learned was kind of showing too immature a product to the world. You know, we didn't necessarily have the opportunity to do our testing and our development away from the eyes of the public and some of that. And so I think, you know, we... without necessarily having a choice we kind of did ourselves a little bit of a disservice letting everybody see um you know the the rough cut of of that car i always kind of felt like the car was very done though like in in rough impression but uh what kind of changes have you have you made there well i think you know that that on the cardinal side it's been getting all of the production body work treatment that it's it's always lacked right the flanges the returns the back sets the um and for for for a lot of really hardcore race racing people that doesn't that was never going to be an impact but for for our track day customer it is and so on the sciota we've
intentionally um kind of withheld a lot of that where you know two three years ago if we're talking about cardinal development stuff yeah it's going to be you know out in front of a couple hundred people at a track day whereas um we we're in the position now where we can we can pull the cover back on a more done product when we feel we're ready um but in terms of where that where that is now we've got um you know the first the first car the first set of body work the first chassis um the first couple of drivetrains um you know the first one all of those components are um partially assembled we're not we're not yet um testing The next couple, we've got a bunch of components kind of stacked up ready to get put together. But we, you know, based on our availability on some track stuff and the weather turning and all that, I think we're poised to do some pretty hefty development on the side of the year this spring. And, you know, I'd really like to open the taps and get the first couple of cars in customer hands in a short burst in late spring or late summer. So there's some challenges there that...
you know, one of the, one of the unique things about that car, the drive chain selection is all, uh, all up to the customer. Um, yeah, I've talked to you about it. Like, it's sort of like a bit of a dream car for me at the moment. Like if I ever have that money, like that would be the first one that I'd go with because we're friends, but I also think it's like achingly gorgeous and a throwback to like modern slash also like old can am slash street car at the same time. I think it's a really good design, but, um, that's the cool part about it is like, you can put this or that or everything that fits in this box in it, which is very cool. Well, and it's, it's wild because when we did the, when we came out with the Cardinal,
Which, granted, looks like an old-school GT Coupe. We said, you know, 1,800 pounds, 300 horsepower. And everybody looked at it, and they saw the classic GT Coupe styling on it. And then when they heard the six pounds per horsepower, they go, oh, that's plenty. That's very affordable. You don't need any more power than that, whatever.
And so the drivetrain development on Cardinals was very quick and easy because for the most part, everybody just wanted the prepackaged, here's the Ford great motor in the Tremec and off go. And it's not stressed. It's all like, it's all built for a car that weighs double. And yeah, it's a, it makes a lot of sense on paper, drivetrain wise, suspension wise. And, and we thought we'd have a similar reaction on the Scioto. And instead these guys all, you know, it looks like a supercar, you know, it looks like a prototype. It looks, you know, whatever. And so everybody at all, you know, it's gotta have, you know, Motec and a thousand horsepower and a sequential box and on and on. And so part of the,
The challenge there, we kind of made our bed and are now laying in it, was we said we'd put whatever people wanted in it, and it's taking a little time to get the engineering done on the whatever people wanted. Can you give an example of an oddball that someone wants in it? There's one getting a Mercilago V12. Neat. And that is a controls engineering challenge and a packaging challenge. And also it spins the wrong way because originally in the Lamborghini, the transmission is next to the driver. So we're turning it back around the other direction. And it's just, you know, it's going to be an amazing car and that'll probably be the best sounding Toyota ever made. But at the same time, like it increases lead times and puts a few extra steps in the process when we agree to take on something like that in addition to the...
you know, the other wild drive trains other people want. So yeah, you can't really just feel like a Volkswagen bug trains and flip the diff on it. I'd really like to know the process of sourcing a Lamborghini V12 for such a project. So our process on that one was we found a guy who his entire livelihood is breaking down Mercy Lagos. Really? Yep. That guy exists? That guy exists. That's awesome. Well, what's cool is he's been doing it so long that people now don't even put in an insurance claim. They just call this guy and sell him the car. Oh, my gosh, really? He's just been at it that long that when people who are into that.
you know, into the Mercilago have, you know, a problem, you know, either they bought parts from him before, or they sold him something before, or whatever, they just all know, or not all of them, but some of them know, like, that's the guy you call. Yeah, it's probably a pretty boutique, like, niche, enthusiastic group. You either, like, don't know anything about the car you have, or you're so deep into it, and you'd probably know whatever his name is. Yeah, and, you know, it was kind of funny, because we made all these arrangements. Me and one of our team members went up there to get it, and like, horrible road trip on the way up, hit all kinds of construction and detours and whatever. Um, finally get there, um, load up the motor, show them the wire transfer receipt. He goes, yeah, I know I said that'd be okay, but I'm not really comfortable with you leaving it until I see the funds hit my account. And it's like, okay, well that can be three days. So, you know, I hope you have a comfy couch because we're going to be here a minute. And he finally relented and we, we took a long trip back and, and whatever, but, um, I have to know, uh, Wisconsin. Oh really? That's not the place I would imagine.
Nope, nope. No, there's a lot of traffic in between you and Wisconsin. I don't get that. Well, we were like, oh, we'll be real smart and go to the Michigan side of the lake because it was almost exactly Catty Corner across the lake from where we would get to it. So we decided to take the Michigan side. That was a bad decision. We got there, you know, whatever, nine hours after we'd hoped to get there, load everything up, sit there waiting for eight, nine hours for the funds to clear, which they never did. He just had to go to work, so he let us go.
And then he let us go just in time for us to try the other route down through Illinois and hit Chicago traffic. So we just, truly a, a, a patience, a patience testing trip, but that was fine. You know, at some point you just, just kind of go, yep, we're, we're going through it this time, you know? So will that engine get like a full standalone or will that use Lamborghini controls or what's the plan for that? That will be a complete note tech system hooked to an Albin sequential box. Wow.
That's cool. So the first three cars are all getting Albans boxes. And we keep joking that we're going to have to straight pipe them all or else the only thing you're going to hear is the straight cut gears coming at you. What's the intention for the first three cars? What are the owners planning to do with them?
So two of the three are strictly track day DE kind of stuff. They, they both run in a, in a crowd where they, and a couple of buddies go, you know, rent out whatever track on a weekday and go hang out and screw around and have fun. And that's kind of it. And I think, I think one of them is looking at this as a, you know, he's trying to get, you know, his he's looking at it, you know, snagging a GT 40 out of the Shelby shop on day one kind of thing. He's hoping that we're successful.
And the thing appreciates. And in the meantime, he can have some fun driving around. Um, the third one, um, the, um, uh, the customer there, they, uh, you know, they want to do some track stuff, but they also, um, I think, I think they have some, um, some aspirations to take this, this thing around to some shows. And, you know, I, I think, I think there's probably some, um, uh some some serious collector concord or whatever kind of mentality at play there so that's kind of cool to hear the varied potential uses of them it is it is and then you know people people can buy them as rollers and do the drivetrain installation or have it done and drive on the street but the sciota is just it's it's hardcore for that we we discourage out pretty heavily on the sciota the um what are the other two cars getting engine wise One is getting an Italian V8 that I don't want to get sued about, and one is getting an American V8, LS7. Very cool. Yeah, that's going to be good. We originally designed that thing around an Audi supercharged V6, and I still think of that as one of the best sort of middle-of-the-road choices for that platform from a packaging perspective, from a power perspective, from a parts availability and reliability perspective. But everybody wants to go wild with these things, and I'm not going to stop them.
Yeah. Why was that the choice? I'm curious. Why was that, that Audi engine the choice? It was, you know, it was really that mix of, you know, let's get something that's reasonably available, affordable to go get. You have, you have plenty of aftermarket and tuning support. It's not real. It's not real.
real complex compared to, um, some of the other, uh, European drivetrain choices. Um, and it would readily bolt up to, um, some of the, uh, more available and accessible transaxle choices. Okay. I wondered if it was transaxle. Yeah. Yeah. That's always part of it with, with, with a mid engine drivetrain. Um, but, um,
you know, I really thought of that as, um, philosophically in the same vein as putting the EcoBoost in the Cardinal. And, um, I think that people just, they, they look at this car in such a different light. Um, you know, the Cardinal is almost, you know, halfway between, um, you know, the nostalgic GT coupe. And for some of our customers, it's kind of just, it's sporting equipment, right? They don't want to put their half million dollar Porsche or whatever on track. And this is, this is just their, their, you know, trusty favorite golf club for the track kind of thing. Yeah. Tom O'Gorman even compared to like a GT3. Like it's.
feels similar in pace and fun and yeah well it's you can you can do all that and not have this appreciating half million dollar or quarter million dollar asset and yeah if you um you know like one of our customers who just designed for a v8 cardinal um he had a radical sr3 that um the fuel cell degraded and he's been waiting a couple months for parts and um his he had a gt3 rs that he broke a wheel bearing and has been waiting on service for that and press is like you know the fuel cells off the shelf wheel bearing you can go get it auto zone like it just made so much more sense to him um in in the frame of mind of this is my piece of equipment to go do the hobby i like um which is different from you know we have you know two customers who bought the car purely on the aesthetics purely on the nostalgia and were extremely pleasantly just extremely pleasantly surprised to find out how quick the car was in addition to that right so um three different approaches to why they bought the car but uh both you know both cases are all three cases happy people so yeah it seems to fit like kind of a weird
a weird niche in, and like that niche varies depending on, on like where you're looking from. You know, if you're looking from like spec Miata, you're like, Oh, that's a, or like a Miata track day car. You're like, Oh, that's like a faster, cooler, easy to live with a unique. And if you're looking at it from the complete opposite perspective of like, I'm sick of working on this Porsche. Like they might, they might actually like fill a similar use, but like from a totally different vantage point. So. Yeah. We used to joke.
I never wanted to test this, still don't, but we always kind of joked that we were recession-proof because in good economic times, people would step up into our cars, and in bad economic times, they would step down into them from a price standpoint. That might actually be true, especially as you grow. But seriously, you look at the Scioto and go, okay, you can have one of those with a complete Motec everything, a sequential box, a 600-wheel horsepower LS power plant, optioned out exactly the way you want, and you're going to come in less than your buddy's GT4? If you're sick of throwing $15,000 brake jobs at a tough car or something and you still want to stay in the hobby and gain speed rather than giving it up, that's a pretty good way to do it.
And I think it's a sexier car at the end, but that's my opinion. Yeah, that's the reason I want one. Abe's still over there thinking about Priuses versus Honda Fitz versus Civics versus Audi plug-ins. I'm quite confident everyone that's listening to the show doesn't want to hear me talk about what cars I might buy. We did a show last week with that. If you don't mind getting technical as far as the uprights and the suspension and all that stuff on this iota, where are you guys with that in comparison to the Cardinal? What is it?
roll on how does it bounce you know sure um it's uh it actually has a number of parts in common with the cardinal um the um both cars are uh pull rod double a arm suspension um so you know formula car style um we go pull rod because we'd rather have uh the dampers tucked uh in and low rather than up high um push right push right if you're uh you know making damping changes on a regular basis or trying to change the geometry or you know keeping your sway bar uh you know just a blade style or something like that Um, but for, for our purposes, the, the lower CG and, and, um, kind of reduced complexity of the pull rod made sense. Um, the, um, the suspension arms, the hubs, um, well, I should say that the arms, the, the uprights, uh, the pull rod, the rockers, all that stuff is, is our design and fabrication, but it all uses everything in it that could wear out, um, or would need replaced. It all uses off the shelf hardware. Uh, so we're using, uh, Audi hubs and wheel bearings, uh, off the shelf, uh, rod ends and.
um, bushings and shocks and springs and all that kind of stuff. Um, you mentioned, uh, the wheel bearing failures, uh, a few minutes ago in the show. Can you talk about the process for specking out a part? Like, uh, you said that you use Audi hubs. Why? Like what was the process for, for selecting that as a component to use? Yeah. With the Cardinal, you use all Mustang uprights and stuff, correct? Right. So yeah. And that's, that's again, a case of it's our upright with their wheel bearing and, and really the, you know, there's, there's a couple of different considerations.
First and foremost, we look at the forces at play, what job we need that part to do. And so that kind of sets our boundaries on. We need something that is at least able to handle these kind of loads, this kind of service life. And thankfully, because our cars are lighter and a little bit overbuilt, our options for off-the-shelf components, we can look at major OE, mass market supplied hardware, and usually kind of take our pick. In the case of the wheel bearings, we specifically wanted to design around the bolt-in cassette style rather than something that would be pressed in or anything like that. Yeah, or a spindle.
Yeah, we go for the cassette style, right? You get the four-bolt cassette and design our upgrade around that. The other thing we do is we want to look at, for the driven wheels especially, we want to look at the drive axle interface and make sure that we're going to be able to pick off-the-shelf components or readily available aftermarket components that will interface, have the strength that we need for the drive train we're looking at. And at that point, we can then turn our eyes to, are the parts readily available? Are they reasonably affordable? Stuff like that. But it all starts from really looking at the design requirements from the loads and the performance of the part. Gotcha. And so if you're looking at OE parts, where do you find the right kind of data to learn about what a potential service life might be or what kinds of loads it's able to sustain before it fails, so on and so forth?
So a lot of that, thankfully, you know, this is kind of the beauty of having the off-the-shelf stuff is a lot of the heavy lifting on that is done way in advance, right? We're certainly not going to repeat the millions of dollars of development that a major OE has done to arrive at the specific component style that they've settled on. This is also an area where drawing on the experience and expertise of our team members can help us cut down the number of options that we look at, the style of component that we want, and kind of rapidly arrive at, you know, we know these are, you know, this style and this whatever is good when used in these applications, or, you know, this is a known quantity from that application. And based on that, we can make some pretty quick decisions about at least narrowing down.
to a specific type or style of a certain component. And from there, we'll probably go, you know, in most cases, we would go to the manufacturer specs on, you know, for something like a wheel bearing, right? You can go take a look at some of the expected service intervals and look at the materials and components used and suss out the specific details on some of the service life information. Yeah, especially if your car weighs half as much, you're going to be putting more G-forces through it, but you can probably expect a pretty long life versus, you know, 4,000 pound German sedan or whatever. or Mustang or whatever. Right. And part of it is also the use case, right? I mean, think of, think of the EcoBoost car or Mustang in a rental car application and all the potholes, the curbs, the everything else it's going to see that would be, would be quite rare for a Cardinal to see. And so, you know, but at the same time, we're not going to run out and go buy the super fragile, ultra lightweight, zero friction racing bearing. You know, that's going to be 10 X the cost and going to have a service life of, you know, half a season in a race car. Yeah. Four track days.
I think Zach Lavoie was talking about how in his Ferrari challenge car, he could, he could expect to do a hub and wheel bearing, I think every event. And they were like $3,600. And that was just like the cost of doing business when you had a Ferrari challenge car. Yeah. No thanks. And like even, even Miatas and Civics, like with OEM equipment and you bolt like Hoosiers on, you go do some track days, right? Like I can't count on all of my fingers and toes. How many times I've seen like wheels fly off of those cars because the hub breaks or.
like somebody looking for a hub or looking for a bearing or like it's it's happened hundreds of times in the past 20 years so uh overbuild that stuff like it makes a lot of sense absolutely and and as we get into you know so with the sciota we're kind of we're going to cross a threshold into especially when people start putting you know really big sticky tires and big aero package and all that stuff we are going to cross a threshold where um we're going to have to start specking some some more um dedicated serious racing components for that yeah um and and that's That's something that, you know, as as we sell these cars and have those discussions with prospective customers, that's something that we have an obligation to make them aware of. Right. And say, look, at some point, you know, the things you're talking about adding to this car, the capability you're talking about achieving with this, it's going to require X number of things being substituted. Motorsports things. Right. And I think the, you know, the threshold for that.
you know, on the one hand, it's cool that you can get that car to that performance level so quickly. Right. But on the other hand, um, the, the commensurate costs rise tremendously. And, um, at some point, uh, you know, we have to, we have to make sure that we stay a little bit true to our original vision on, um, something that's attainable and accessible to the majority of motorsports. Yeah. What, uh, what are your goals long-term for, for both of these cars? Like what is, what's the 10 year goal? Like if you're doing this stuff in a decade, where do you want to be?
Um, I think, I think there are some good examples in the market of other boutique sports car and motorsport, um, motorsport chassis manufacturers. Um, you know, realistically we looked around, um, you know, the, the thing that eventually became fields out of works, we were looking around in 2015, 2016 and kind of going, man, you know, so many of the, the dedicated racing, um, chassis manufacturers and and um and suppliers they they either had to branch into the much more uh the broader pool of club racing track days general street performance stuff or they didn't survive um you know names like like lola um that just you know there there wasn't a um there wasn't a market for for what they were selling at some point at the time of motorsports they didn't sell a lot what they sold was cool usually right and so um but in comparison you know
in in the the 70s and 80s like my dad was part of a lola dealer like they did volume to the point that they had dealers right i didn't know that yeah and so um So if you think about that in comparison to where we are today, where we are today, there are people who are dealers for other boutique sports car manufacturers, right? But it's very rare that you have someone who only makes competition vehicles, right? And so what we're looking at is, you know, as the piece of technology that you get into commute to work and back and use in daily life diverges from the thing that you take to a track to enjoy, we want to be one of the premier providers.
for the hobby side of the thing that people are going to want to buy to go enjoy their hobby. And so, you know, we look at Porsche, BMW, Chevrolet, Ford, who are trying to split the middle. And ultimately, their real volume, their real market is the commuter side. Yeah, they're using a few halo cars to sell a bunch of SUVs. Right. And so they're beholden to the costs of the technologies that they develop for that. They have to amortize all of the...
production rigs and and factories that they've built to do that stuff and it constrains them from building something that's a pure analog machine like like we're doing and so um that's really the vision over over the next you know five ten years is um at a couple of different levels you know sort of serving different levels of the hobby with these different models we want to be one of the premier providers for the hobby and the enthusiast side of this market yeah i want to see you do it for a while and uh and become that because i think both cars like they were like I really think they are just so cool. Like I've seen, I've seen the Cardinals in person a bunch and like seen them go around the racetrack a bunch. And I think that's rad. And they, they really do kind of fit this, this cool niche. I think there's a lot of, there's a lot of pluses and not a lot of minuses to that car. And I feel like the, the CO is like on the other side of it, but also like in the same vein, I just, I love the philosophy, philosophy behind like the design and.
and the goals of them. So especially as this, this hobby, like the automotive hobby, like it's, you look at every track being built, like besides Ozarks, which was like built like with, Oh man, I got a bunch of money. I'm going to build this track. Everything is going like the equestrian model where it's like, Oh, I got to sell a bunch of condos and pay for my racetrack. Like this stuff, this kind of car is like, it's, it's the hobby horse. It's going to be like the horse in the stable. That's, you know, on Tuesdays I go drive my Cardinals. Oh, exactly. And that's what it's made for. Right. And that's the whole point is, you know, we, we want this to be your favorite golf club, but for the racetrack. Right.
So that's where that's at. And then, you know, the other side of our motorsports journey right now, we've got Dustin Barty that we've hired to do, to basically lead our FB Autosport group and a whole bunch of really cool projects in the works over there. Some of it's grid life related and, you know, you guys have seen and talked about a lot of that, but we do have some other stuff that's just, you know, general track day or street performance stuff. You know, it's exciting to be, you know, pushing some technological boundaries. That's something I frankly really kind of miss from my aerospace work. And I'm glad to be back in a little bit of that role. We've got some controls packages around some dual clutch swaps and some engine swaps that we're working on and some data systems starting to get into real, you know, sensor arrays for tire performance and chassis performance and trying to bring that into a...
a more plug and play, uh, and accessible level for, for club racing. So, um, I think those things are all really, really exciting, but also, um, they're fulfilling for, for me to keep trying to push some boundaries. Babe, what you got? How many questions do you want to bombard Rob with as we end his lunch? I feel like I've been talking too much. You've been talking the exact right amount. So we've spent quite a lot of time talking about Fields Auto Works, but you did just highlight or announce this new venture. What haven't we discussed already that you think the Slip Angle listeners might want to know?
Well, I would say the number one thing that they'd want to know and that I would want them to know is that we're taking on more arrive and drive customers, more support contracts. We really want to be a presence in the Gridlife paddock and other paddocks as a group of people that you can kind of join forces with us, count on us to be a logistics partner, a hospitality partner, a service partner, and really enhance and improve. people's experience of going to events and being at the track. We've hit on it a couple of times on the podcast about the cost of an arrive and drive program or some hybrid version of an arrive and drive versus the cost of having your own equipment and doing your own logistics and all of that. And as we look at some of the high profile events for this year and some of the logistics involved and all that, I think for people who are willing to take the jump and
you know kind of put some some faith in in our expertise and our experience and and hope to get a little bit better maybe a little bit better result maybe a little more enjoyment out of the events um you know we're here for that we have we have capacity we have uh openings to do that and that's something that you know a year ago um we were a lot a lot less um We didn't encourage that quite so much because we were still building capacity and trying to pick our spot on that. And now I think we've arrived at a point where we have the infrastructure, we have the people, and I think we're ready to start being more of that face of trackside support in the paddock. Interesting. Well, as you kind of grow into the arrive and drive, I know that you have some pretty large equipment that's capable of moving vehicles around.
you know, if there are drivers in the paddock that are interested to go to, let's say some of those more far away events this year, should they reach out to you for just like potentially even logistics help? Potentially, I will say we have, we kind of have a mandate to prioritize the people who are going to want to use our services, right? And so I'm never going to say, you know, hey, I'm going to hold this spot open in the hope that somebody else takes it. But we do already have some folks who have reached out about, you know, partnering up and doing that. That said, I would definitely encourage people to reach out. And if it suddenly makes sense for us to take two tracks or, you know, if it makes sense for us to.
um to ship one thing and carry another we'll always be flexible we know that it's a dynamic environment and um people people are gonna people are gonna drop out people are gonna join i mean it's you guys know better than anybody that it's uh It's never set until it actually happens, right? Yeah, you almost don't know who's coming until the green flag flies sometimes. I was spending a little time thinking even yesterday about how the schedule is going to work out this year. Adam, I believe that we're going from mid-Ohio. It's like a 10-day break, and then we're straight at Lime Rock. I can imagine that there's going to be people that would be interested in trying to figure out how to move cars and stuff and whatever. So I imagine that there's plenty of people that will want all the help they can get.
My hope this year even is to find a place in Ohio to leave my rig with the dyno behind it. I don't have to do the extra 12 cumulative hours behind the wheel. We can probably help with that specific request. Moving things around is a thing, though. You want to fill that truck, and if you have enough call for people to put things in trucks, somebody's got to pay for the fuel bills. I think our approach on that is, of course, priority one is get yourself, get the car out there.
We are trying to take an approach here of if we take all the time and all the effort and all the expense to go out there and you pop an engine or something else like that happens, for our long-term, season-long support customers, we kind of have a requirement to make sure that we have everything with us to salvage that, to make sure that their investment in everything else to get there isn't wasted. I think that's the... That's a level of commitment in terms of spares and time and other logistical items that not everybody is going to be prepared to make. But if somebody is on the fence about that or they see the value in that and we can provide that for them, that's a spot that we can kind of hit. We're not uniquely positioned, but we're well positioned to help someone in that situation.
Yeah, the last thing I want to ask about is how is the potential Sunday Cup build going? How is that? I think it's great. It was making some laps of the neighborhood when a certain Mr. Tipple arrived. Truly like the one day we got the car out and, you know, sure enough, I'm standing out there watching it go around the neighborhood.
He pulled it up and said, oh, are you waiting for the mail out here or what? Just coming to spy on his future competitors. That's right. I think we, from the jump, that car has been focused on the Enduro side. We've been focused on Supergrid, on Sunday Club.
And so obviously with some of the rules updates and some of that stuff that has some impact on us, but our number one goal was to come out with something that was going to be reliable, that was going to be fun, that people would want to have a seat in for the Supergrid events because it was going to be a good time and a good way to participate and a fairly low barrier to entry in comparison to maybe some of the other things that we do. And in terms of achieving those goals, I think that we're right on track. um, we'll, we'll never not be competitive people, right? We want to win. We want to do well, but, uh, at the same time, um, it's not, it's not the only goal for that chassis. So, um, I think that chassis has got pretty good potential to, to do well in Sunday cup too, in time attack. Um, and it's also pretty unique in that world. Like it's, you know, a modern mini is kind of pretty too. Like it's very cool. It's a, it's a silly little car. Um, it's, you know, that, that, uh, that coupe body style.
They only made it for a little bit and it kind of got a little bit of a cult following. I was, um, when I first went looking for a car, so, you know, just to kind of, um, focus the story a little bit, the, um, the super grid announcement came out, no rules yet. And I, um, immediately started shopping for a car, uh, got our plane to Nashville, bought a car, um, effectively sight unseen until I got there, um, drove it back from Nashville. Um, We put a clutch in it. We put coilovers on it. We did a couple other things. Pete drove it to Pike's Peak. It raced. It did Simon Tackett at Pike's Peak and then drove back. And then the rules were released for Super Grid. I mean, it was basically always going to be cage Sunday cup rules. Oh, yeah. We weren't taking some big risks. But our level of excitement for that was high enough that that was how that went down from our point of view. Hopefully we have four really busy, fun events this year with Super Grid.
Oh, absolutely. And that car will be available for, so it's already got three HPDE events that the seats rented out for. Like, you know, that car will be a really good platform for all kinds of stuff. But I think for Sunday Cup specifically, you know, I think with the... the the right combination of of you know some setup and the right driver the right the right place the right time i think it has it has every opportunity to be uh at the front but uh at the same time i don't think that it's going to be you know it's a whole different thing when you have one driver one car the whole season yeah right you know and and In that case, you know, that's kind of like, you know, us with Colton, right? Faster and faster and faster. Exactly. And he's got a very clear goal, clear purpose for the time we're spending, the parts that are going on the car. I mean, all of it is pulling in one direction. And I think that, you know, if somebody walks through our door and said, hey, that Mini Coupe you got, I want to go be, you know, competitive in Sunday Cup. And then I'm going to, you know, rent the whole season in that car or whatever. That'd be a whole different.
whole different situation but the reality is it's pulling a lot of different um a lot of different jobs right away um and it's got to be from the get-go we wanted it to be a good endurance car and that's where its focus is yeah it's it's also pretty tough to win a class that you know the people that win that class have been in that class for years and they're in the same car and they're developing you know all their preferences and setup and it just takes a while it takes a while to win things so oh yeah absolutely yeah i think it's a super unique choice when i saw people into ppir with it i was like man that is so wild I think it was the only, only like the second or third one of those coupes that I've ever seen. So like they're pretty rare. They are. And it's, I enjoyed it. I mean, I drove it a whole bunch before we, before we tore into it and you know, just a, just a fun little, you know, runabout go-kart thing. I think it's, it's philosophically it's the opposite of the fit. You cannot fit anything into that car, but it's fun and it's silly and it looks kind of neat. So yeah, pretty wild. Anyway.
Well, should we let him go back to his luncheon? It sounds like it's probably time to go back to work. Now that you've got kind of multiple endeavors, can you share with us where people will venture out to find each of those respective organizations? Yeah, absolutely. So for Fields Auto Works, FieldsAutoWorks.com and our Facebook and Instagram pages are all under Fields Auto Works. The existing Fields Engineering social media accounts will get converted over to Fields Beltwell Autosport. And we've got a website getting ready to launch for that.
which will be fields.well.com. I'm trying to get FB Autosport as well for URL. But you'll see the social media change over. And then in the event that somebody listening might have something that's a hardcore engineering project that maybe is outside of motorsport, Fields Engineering, we'll at some point here in the near future put up a site for that and put up some new social media for that. But in the meantime, anything like that, just direct contact for me or maybe for Dustin.
And then finally, the last thing that I think is worth mentioning is anybody who's looking at any kind of a DCT swap or has any interest in that, we're getting ready to do some pre-order, you know, discounted type activity on that. So particularly LS engines, BMW, V8s and V10s, Coyote or EcoBoost motors, we're looking for people who might have an interest in seeing those kind of powertrains paired up with inline or transaxle dual clutch transmissions. Looking for different applications for that. Interesting. That's a lot of different stuff. We do have a lot of irons in the fire, but thankfully we're keeping a pretty hot fire going here. I think we need to find a whole crew of listeners to rent that little mini for a couple of super grids and come hang out with us and have a good old time.
I think that might be one of the best ways to experience a good life event. I really do. Yeah, that sounds super fun. We've got four of them. We've got Midwest Rev Up a couple weeks before Midwest Festival at Gingerman, NJMP, Heartland, and Autobahn. So, yeah, kind of all over the place. Endurance Racing at Heartland will be cool.
Heartland's got the greatest pit lane, too. It's going to be super cool. It's going to be fun. We'll crack out the big timing stand with the awning and all the other stuff and have some in-car video and data to watch on pit lane. I think a good way to do the endurance side without getting too nutty on the...
on the tech side. So, um, or too expensive. I mean, you know, I don't, I don't, I don't think we have any aspiration to try and give this the same treatment that some of the top teams in, in, uh, you know, like a WRL or something do. Uh, but we do, we do still want to provide an experience of a higher quality. So guys, I think that's a show. Well, yeah, man, I hope your lunch, uh, I hope you ate some food, but I don't think you did. So it was before we started. So get back to work. That's right.
Yep. All right. See ya. Slip Angle was created by Austin Cabot and Adam Jubay, co-hosted by Derek Yarbrough and production by Abram Schmucker, who mixes all of our terrible audio. If you'd like the show, please rate us and review us on iTunes and come and find us in the pits that you'd like to say hello.