Desk of Ladyada - Blinka x Tachyon, BMP585, VEML6046, e-Ink bonnet

This week we got Claude working natively on Windows (yay!) which speeds up development since we're not hitting the filesystem through multiple layers. That meant we also worked on a bunch of little breakouts: the BMP585 protos came in and those worked fine. Plus we knocked out the VEML6046 RGB+IR sensor library (https://github.com/adafruit/Adafruit_VEML6046) and started work on a few others. It turns out the bq25628e (https://github.com/adafruit/Adafruit_bq25628e) was not what we wanted in a charger, because ILimit doesn't affect the charge rate, which is like 40mA by default - boo! We'll find another alternative and also try to get back to that bq25798 (https://github.com/adafruit/Adafruit_bq25798) solar charger shortly. We also worked on the e-Ink bonnet, which worked great as rev A and only needed some pinout swaps - thanks to BlitzCity for updating the CircuitPython-api EPD library (https://github.com/adafruit/Adafruit_CircuitPython_EPD) to add support for the bigger 7.5" & friends which we verified on Raspberry Pi and also the Particle Tachyon - speaking of which we are getting Blinka support into main for that board! (https://github.com/adafruit/Adafruit_Blinka/pull/1001) And on The Great Search - 24-bit I2C ADC Chip for RTD sensors #circuitpython #sensorhacks #thegreatsearch