Desk of Ladyada – More Fruit Jam Work & Lots of Little Breakouts 🍓🛠️

This week at the desk, we worked on getting more small hardware boards done. We revised our 1.5" transparent OLED breakout (oops, pins were swapped), designed breakouts for sensors like the AS5600 (https://www.digikey.com/en/products/detail/ams-osram-usa-inc/AS5600-ASOM/8250257) and STHS34PF80 (https://www.digikey.com/en/products/detail/stmicroelectronics/STHS34PF80/13187390), and updated the NAU7802 (https://www.digikey.com/en/products/detail/nuvoton-technology-corporation-of-america/NAU7802SGI/4929384) to have both ADC ports available. We’re also working on another stepper motor driver, since the TMC2209 breakout (https://www.adafruit.com/product/6121) was a big hit. We wrapped and sent out the Triple-output Active Shifting RGB Matrix Bonnet (https://blog.adafruit.com/2025/02/28/triple-matrix-bonnet-makes-big-bright-displays/). Then we finally had a little time to get back into bigger projects, like Fruit Jam, which we re-picked-up! This week we focused on implementing the ESP32-C6 Wi-Fi co-processor, which needed a bit of rework, but now we've got rev C prototype PCBs on the way. ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------