Electricians, CO2 Hot Gas Defrost, Danfoss EKE400 &  Parts Changing Process Of Elimination?- Episode-526 video

Target Startup Chaos, Buggy CoreLinks, andDanfoss EKE400/ICAD Headaches | Advanced Refrigeration PodcastBrett and Kevin open the AdvancedRefrigeration Podcast after a brutal week, with Brett stuck on a transcritical Kevinwith a  startup at a poorly designed downtown store wherethe E3 and roof access are far from the grocery and the rack is on the roof. Heblames electricians for mis-marked and mixed-up comm lines, missingcontrol-power splices, and dangerous live voltages, turning a “simple” startupinto days of rework. They also vent about painfully slow, buggy CoreLinksetup and web UI issues compared to smoother E3 terminal mode. Kevin then walksthrough using a Danfoss EKE400 in CoolConfig for defrost and reheat control, MMRGdisplay jumper/address quirks, Modbus connection ideas, and generating wiringdiagrams. They finish with ICAD failures, O-ring moisture/rust problems, andsolving calibration alarms via process-of-elimination part swapping.