Episode 13: Data-Informed Coaching & The Future of Speed Training with Matt Tometz

Podcast SummaryIn this episode of Rapid Fire by SimpliFaster, host Justin Ochoa connects with Matt Tometz to dive into the evolution of his role from strength coach (Formerly: TC Boost, Northwestern) to marketing manager at 1080 Motion. The conversation spans topics like load velocity profiling, the power of being data-informed over data-driven, how to coach speed effectively with limited equipment, and the broader role of sports tech in coaching. Tometz shares both high-level philosophy and practical coaching hacks for improving performance outcomes, regardless of budget.Timestamps00:00 – 01:00 | Introduction & Catching Up Justin introduces Matt Tometz (aka Coach Big Toe). The two reconnect and discuss how their paths originally crossed through 1080 and mutual contacts.01:00 – 03:30 | Transition to 1080 & New Role Matt shares his move from on-floor coaching to leading marketing at 1080. He explains how his coaching experience, content creation skills, and product familiarity made the transition natural.03:30 – 06:15 | Load Velocity Profiling & “Peaking Out” They dive into LVP basics. Matt explains the concept of “peaking out” — ensuring an athlete hits top velocity at each load for valid data. He discusses how that impacts profiling accuracy and programming.06:15 – 09:00 | Troubleshooting Profiling: Load, Distance, and R² Justin asks how to respond if an athlete doesn’t peak. Matt introduces the “triangle” approach: coach's eye, athlete feedback, and the data. He breaks down the importance of maintaining consistent protocols and explains how R² helps validate the profile.09:00 – 10:30 | What’s a Good R²? Matt suggests aiming for R² > 0.97–0.98. Below that range likely indicates a flawed profile or poor execution, in which case it’s best to repeat the session.10:30 – 14:00 | Coaching with Tech vs. Coaching without It Justin asks about Matt’s perspective on sports tech. Matt emphasizes that tech is just hardware — it’s how you use it that matters. He shares how he ran his own experiments with 1080 at TC Boost and how good training doesn’t require fancy tools.14:00 – 16:45 | What Tech Adds: Precision, Not Necessity Matt breaks down how coaches can now “put fingers on” previously invisible performance factors. He explains metrics like RF max, DRF, V max, and V zero. He also contrasts old-school Excel-based workflows with today's instant software outputs.16:45 – 20:30 | Data-Informed vs. Data-Driven Matt explains the difference: - *Data-driven* = letting the data dictate every decision - *Data-informed* = using data alongside coaching judgment He gives a practical example of adjusting RF max thresholds to better fit a team’s needs.20:30 – 24:00 | Best Low-Cost Tools for Speed Training Matt outlines his favorite affordable tools—specifically thick resistance bands (~$60) used in a double-loop configuration. He prefers them to friction-based devices due to smoother resistance and versatility.24:00 – 27:00 | Velocity Decrement Without Expensive Tech He explains how coaches can simulate velocity-based programming using time and distance. Example: if an athlete runs 10 yards in 2 seconds unresisted, aim for 4 seconds to simulate 50% VDEC. He shares how he scaled this with large groups using run rockets and manual timing.27:00 – 29:00 | Where to Find Matt & Final Thoughts Matt plugs his social media (@CoachBigToe), YouTube, podcast, and Patreon, where he posts exclusive articles. Make sure to give Matt a follow!