GETTING YOUR POOL READY SERIES: Tips & Tricks Part 1

Producer Dee Daniels is at Pride Pool Spas and Leisure Products in Claxton to talk with Marshall Smith on a SPECIAL SERIES about getting pools “jump in” ready as warmer weather arrives in southeast Georgia temperatures.   Marshall stresses that clear water can be deceiving after 60–90 days of minimal attention, so the first step is water testing, including Pride Pools’ Bioguard-based 13-point analysis (beyond test strips) that checks items like phosphates, total dissolved solids, calcium hardness, alkalinity, pH, iron, and copper; customers can pick up a free labeled sample bottle and avoid containers like pickle jars.   They also discuss filter readiness—sand, cartridge, or DE—cleaning or replacing media as needed, with sand typically lasting about three years and recommended cleaning twice a year, and cartridge filters cleaned every 60–90 days with a backup set to prevent downtime. Finally, they recommend a full preseason assessment for winter damage, including baskets, tools, seals, and pump leaks that can lead to costly failures.   FIND A FAVORITE SPOT IN THIS EPISODE: 00:00 Welcome to Claxton 00:25 Weather and Pool Plans 01:37 Swim Ready Not Just Clear 03:53 Water Testing Essentials 06:41 How to Bring Samples 08:54 Inside the Claxton Store 10:13 Filter Types and Care 13:22 When to Replace Sand 16:50 Cleaning Schedule Basics 18:48 Full Spring Pool Check 23:57 Wrap Up and Next Episode   LEARN MORE WITH THESE SHOW LINKS: TAP HERE for the Pride Pools Main Page TAP HERE to see both Pride Pools Locations TAP HERE to enter the Pride Pools POOL DESIGN CENTER TAP HERE to enter Pride Pools SPA DESIGN CENTER TAP HERE to learn more about POOL & SPA PRODUCTS TAP HERE to learn more about POOL & SPA SERVICES EMAIL QUESTIONS and COMMENTS to [email protected] PRIDE POOLS on FACEBOOK PRIDE POOLS on X PRIDE POOLS on INSTAGRAM PRIDE POOLS on YOUTUBE