Home Tonometry and Remote Monitoring in Glaucoma – A Patient-Centered Investigation

This audio article is from VisualFieldTest.com.Read the full article here: https://visualfieldtest.com/en/home-tonometry-and-remote-monitoring-in-glaucoma-a-patient-centered-investigationTest your visual field online: https://visualfieldtest.comSupport the show so new episodes keep coming: https://www.buzzsprout.com/2563091/supportExcerpt:Home Tonometry and Remote Monitoring in Glaucoma – A Patient-Centered InvestigationGlaucoma care has traditionally relied on eye clinic visits every few months to check intraocular pressure (IOP). But IOP actually goes up and down over the day and night. In fact, studies show that a single office measurement misses the true peak pressure most of the time (). These hidden spikes may contribute to glaucoma progression. New handheld devices let patients measure their own IOP at home. For a patient, this could mean a more complete picture of their eye pressure, potentially catching worrisome rises early. In this article, we review how these home tonometry tools work, what it’s like to use one, and whether the extra data helps protect vision – as well as practical issues like cost, training, and the patient experience.Home IOP Monitoring Devices on the MarketThe main type of home tonometer approved for patients is the rebound tonometer. Instead of the clinic “puff” or a weighted cuff, a rebound tonometer uses a tiny probe that bounces off the cornea and measures the IOP from the rebound speed. Two examples are:iCare HOME – This is a FDA-cleared, hand-held rebound tonometer approved for patient use. The device uses a disposable probe and magnetic launch system. When ready, it emits a short magnetic pulse sending the probe toward the eye. The probe touches the cornea and rebounds back. A built-in sensor calculates IOP from how fast the probe rebounds (). No numbing drops are needed (the probe impact is so quick it’s usually painless). The iCare HOME has adjustable forehead and cheek rests to help the patient hold it in the right position, and lights on the probe base that show green when alignment is correct (). The patient pushes a button when the device is aligned, which triggers six quick readings. The final IOP is the average of those readings (dropping the highest and lowest of the six) (). Tono-Vera (Reichert Tono-Vera) – This is a newer clinically-approved tether-free rebound tonometer (about $800) that offers a live camera view of the eye to guide proper alignment. Like iCare, it uses a micro-probe and automatic measurements without anesthetic. It displays readings immediately and color-codes their reliability on the screen. This device is typically marketed to doctors, but its portable design could also allow home use with training. Other approaches exist but are less common for home use. For example, Sensimed Triggerfish is a contact-lens sensor used in specialized settings. A soft lens embedded with strain gauges continuously records tiny eye shape changes over 24 hours, giving a pressure pattern rather than an absolute mmHg reading (). It is FDA-cleared for research and some clinical use, but it is bulky (one-use, overnight device) and doesn’t show a straightforward pressure number. It is currently not something a patient buys for daily home checks, but it illustrates the push toward around-the-clock monitoring. (Similarly, experimental implantable sensors are under development.)In practice today, if a doctor wants a patient’s home IOP, they usually prescribe or loan an iCare HOME tonometer (including its new-generation “HOME2” model). Companies like MyEyes sell or rent these devices to patients. The iCare HOME2 links to a smartphone app or cloud service (for upSupport the show