How I Made My Elderberry Wine: Tips and Tricks (Wild Fermentation)
from theworldaroundme 3Speak Podcast Hosted by theworldaroundme
 Elderberry season has arrived once again, and I left it a little late this year, some berries have already dried up on the stem. But knowing how nice they are as wine, I was motivated to pick them just after the rain had stopped.  At the end of the road, a rainbow appeared, and it cheered me up while I was picking.  They are everywhere here.  I enjoyed gathering them along this peaceful country road.  Also, by the hedges in the field.  And plenty in the woodland, and even more on the very tall tree that I could not reach, so I only picked the ones I could get my hand to.  These berries are easy to collect, and I could fill the basket in just 15 minutes.  Best to process them fresh, so I prepare them immediately after picking, using a fork to pluck the berries, removing the stems and anything I don’t want to include. Once you have tasted how nice elderberry wine is, it becomes a routine every year, and I tend to improve the recipes. 🍷 Wild Elderberry Wine (yields about 8 litres with ~ 13% ABV) Ingredients:   4 kg ripe black elderberries (stems removed) 4 L water Juice and pulp of 2 lemons 1 cup fresh elderberries (raw, optional, for wild yeast boost) A splash of elderflower champagne (optional, for active wild yeast) 2 kg sugar (sweet wine), or 1.73 kg sugar (if you prefer a drier wine) Instructions 🍷 Simmer and Blend the Base Berries  Place 4 kg elderberries (stems removed) in a large pot with 4 L water. Simmer gently for 20-30 minutes.  Midway through simmering, blend the berries to fully break them down. Let the mixture cool to room temperature (~20 °C).   Add Lemon juice and pulp, 1 cup fresh raw elderberries and/or a few elderflowers or a splash of elderflower champagne. These introduce wild yeast to start fermentation naturally. 🍷 Hands-Off Initial Fermentation  Pour 2 kg of sugar over the top, but do not stir. Leave undisturbed for the first 1 day. The yeast will start feeding on the sugar gradually without being overwhelmed. Cover loosely with a cloth or lid. Fermentation produces carbon dioxide, and wild yeast needs a little oxygen to establish. A loose cover lets gases escape and keeps dust or insects out. 🍷 Daily Stirring  After a day, stir gently twice per day for 4-7 days to keep the yeast active and in contact with the sugar, and this also avoids mould and kahm yeast formation.  Normally, it starts bubbling after 4 days, especially if active elderflower champagne was added.  Once bubbling, strain the solids.  Then transfer the liquid to the fermentation vessel or demijohn. I find that transferring to the vessel earlier prevents mould and kahm yeast from developing, especially in wild fermentation.  Fit the fermentation airlock tightly. I put brandy in the airlock instead of water to deter flies, and it also serves as a sanitiser. 🍷 Long Undisturbed Fermentation  Leave the wine undisturbed in the vessel for 6 months to a year. I tend to avoid frequent racking. Minimal handling reduces bacteria risk and allows wild yeast to finish fermentation naturally, the flavour turns out nicer. 🍷 Bottling After 6 months, rack the wine and siphon the clear top portion into sanitised bottles. The cloudy bottom will have some lees and berry particles settled. I sometimes leave them for an extra complex wine with a rich mouthfeel, or I filter them and use the lees for other ferments, such as vinegar, or as an extra flavouring in cooking.  Enjoy your fruity wine! Or age further if desired; flavour will deepen and mellow over time. [](https://3speak.tv/watch?v=theworldaroundme/zqrzjrmtbh) Video of the current fermenting wine, bubbling as the yeast releases gas. Have a lovely day, Mariah 🍷
Embed this episode
No transcript yet.