How to Install a Plug-In Wall Sconce for Stylish Wall Lighting

Wall sconces are a great way to add focused task lighting or decorative accent lighting to your home. According to Noah Miller, home improvement expert at Rowabi, the installation process depends on the type of sconce you choose.Plug-in wall sconces are the easiest option and ideal for renters or temporary setups since they require minimal installation. In contrast, hardwired wall sconces offer a cleaner and more permanent look but require basic electrical knowledge and may involve cutting into drywall.No matter which type you install, always begin by turning off the power at the circuit breaker and confirming it with a voltage tester to ensure safety.What Is a Wall Sconce?A wall sconce is a lighting fixture mounted directly onto a wall. It is commonly used to create soft ambient lighting or highlight certain areas of a room.Wall sconces are often installed in spaces such as bathrooms, dining rooms, hallways, and staircases. With a wide variety of designs available, you can choose a style that complements your chandelier, décor theme, or the architectural style of your home.How to Remove an Old Wall SconceBefore installing a new wall sconce, you may need to remove the existing fixture. This could be done to update your décor, improve lighting, or replace an outdated fixture.Turn Off the PowerStart by turning off the power to the light fixture at your home’s circuit breaker. This step is essential to prevent electrical shock.After switching off the power, use a voltage tester to confirm that no electricity is flowing to the fixture.Remove the Wall SconceCarefully remove the light bulbs first to prevent breakage and make the fixture easier to handle.Next, locate the screws that secure the sconce to the wall—usually at the base or sides of the fixture. Use a screwdriver to remove them and gently detach the sconce from the wall.Disconnect the WiringOnce the fixture is loose, pull it slightly away from the wall to expose the wiring connections.Unscrew the wire nuts or connectors that link the fixture wires to the wall wires. Be careful not to damage the wiring during this step.If there are multiple wires, note how they were connected to make reinstallation easier.Remove the Mounting BracketAfter disconnecting the wires, cover the exposed wires with wire nuts or electrical tape to prevent accidental contact.If the sconce is attached to a mounting bracket, unscrew the bracket from the wall and remove it completely.See more: https://www.rowabi.com/blogs/lab-of-wabi-sabi-blogs/how-to-install-plug-in-wall-sconce