How to roll up coax and rope?

What use is an F-call? When you start in Amateur Radio you'll come across the problem of rolling up coax and rope. If it goes the way it went for me, you'll be doing what you always did, that is, winding up the coax on your arm until someone stops you and tells you that you're doing it wrong. Then you're likely to be told about rolling out the coax into a straight line and when you want to take it home after a field-day, you'll either be rolling it onto a roll, or physically hand-over-hand be rolling the coax into a circle. This is a regular pain in the Alpha. I managed to seek some advice from people who do this for a living. Film crews and audio technicians have to roll up cable on a regular basis and they don't do anything like I was told. Head on over to YouTube and search for "How to Properly Roll Cable". You'll come across a 1 minute 4 second video by Randy Coppinger. He shows you the Over-Under technique and once you've mastered that you'll never twist coax again and your coax won't get damaged when you unroll it. You can use the same technique for power leads, for garden hoses and in some cases rope. For many of the thin ropes you might use as guy wires for temporary antennas you might want to look for a butterfly coil. There are lots of videos around, but the one that seems to explain it simply is the one by Joe Kuster, "How to Butterfly Coil a Slackline or Rope". These two techniques, Over-Under and Butterfly Coil will make your coax and rope last much longer and you'll spend many hours less untangling the mess or replacing kinked coax. I'm Onno VK6FLAB