Hunting for the perfect SWR.

Foundations of Amateur Radio There is a persistent perception among a small part of the amateur community that you need to build, buy or use antennas with a perfect 1:1 SWR to get the best results. Sometimes a contest erupts with who can get the lowest SWR. Without getting technical, since that could take hours and you have better things to do. A 50 Ohm dummy load has a perfect SWR of 1:1 and you should already know that a proper dummy load doesn't radiate, so while it has a perfect SWR it's not a perfect antenna. If your SWR meter reads 1.5:1, you're losing 3% of your signal, at 2:1 it's 11%, so just because the SWR is 2, doesn't mean you've got a dud antenna. Now I should point out that this can be a particularly dense topic if you get into the finer detail and if you do a search for "Understanding SWR by Example", you'll come across a delightful and very detailed document written by Darrin K5DVW and published in QST magazine that goes into pictures, graphs and explanations and also discusses ladder line. So, you can now stop hunting for the perfect 1:1 SWR and learn what your SWR meter is telling you. I'm Onno VK6FLAB