Jet-Lube Ezy-Turn #3 Arctic Valve Sealant: How It Prevents Scoring and Galling in Arctic Pipeline Service

Jet-Lube EZY-TURN #3 ARCTIC valve sealant is the engineered answer to valve scoring, galling, and sealant failure in arctic pipeline and compressor station service — covering gate and plug valves exposed to aliphatic hydrocarbons, sour gas, LPG, and H2S from -58°F all the way to 500°F. If you're fighting stuck valves or scored plug surfaces in sub-arctic field conditions, the temperature range alone closes the argument. EZY-TURN #3 ARCTIC is pumpable to -58°F (-50°C) with an appropriate pump — no preheating, no downtime waiting for product to flow. On the high end, flash point exceeds 500°F (260°C) per ASTM D-92, and the inorganic thickener delivers a dropping point of none per ASTM D-2265, meaning it will not liquefy and migrate out of the valve body at compressor station operating temps. That's the arctic valve sealant temperature range guide your spec sheet needs. Browse the full JetLube catalog at https://www.pe-energy.com/brand/jet-lube/ Preventing valve galling in sour gas service starts with a sealant that resists the media trying to destroy it. EZY-TURN #3 ARCTIC is formulated to resist all aliphatic hydrocarbons and is rated for natural gas, hot gases, butane, propane, LPG, fuel oil, H2S, saline, and salt water. Its proprietary blend of oils and solid lubricants actively lowers operating torque, keeping plug surfaces from scoring even under high-cycle demand. This is the plug valve sealant for aliphatic hydrocarbons and the gate valve sealant for H2S service that procurement teams can put into a single line item across multiple service environments. The physical specs matter for quality programs. EZY-TURN #3 ARCTIC appears as a grey/black paste with a cone penetration of 290–335 at 77°F (300 strokes, as manufactured). Density is 8.80 lb/gal, specific gravity 1.06. Oil separation is held to a maximum of 3.0 per ASTM D-6184 — the product stays homogeneous in service, not stratified in the valve cavity. Evaporation loss is less than 0.5% over 24 hours at 150°C, confirming low volatility in sustained high-temperature pipeline compressor station valve lubricant applications. Manufacturing is USA-based under ISO 9001:2015 and ISO 14001:2015 — dual certifications your supplier qualification program can document. Cleanup after injection is straightforward. Conventional oxygenated solvents — including methanol, ethanol, IPA, acetone, and ketones, as well as chlorinated and aromatic solvents — are all compatible with EZY-TURN #3 ARCTIC. Critical restriction: EZY-TURN #3 ARCTIC is not approved for oxygen or strong oxidizer service; specify an oxygen-compatible product for those valves. The product is listed as nontoxic, nonhazardous, and biodegradable, supporting environmental compliance at pipeline rights-of-way and compressor stations. Wholesale orders scale from a single spare to a full fleet rollout. Resources https://gravatar.com/peenergymx https://gravatar.com/taylorindustrialequipment