Jet-Lube V-2 Thread Sealant: Lead-Free, NSF-61 Potable-Water Sealing to 500°F

Jet-Lube V-2 lead-free potable-water thread sealant is the NSF/ANSI 61-certified, AB1953-compliant, PTFE-reinforced sealant your maintenance and plumbing crews need when a threaded joint carries drinking water — and when an inspector is going to check the paperwork. Full product details and wholesale ordering at https://www.pe-energy.com/product/jet-lube-v-2-multi-purpose-thread-sealant/ V-2 is built on a vegetable-oil base — no petroleum, no lead, no metals of any kind. That nonpetroleum, nonmetallic chemistry is exactly what earns it NSF/ANSI 61 certification including Annex G for potable-water contact, plus California AB1953 (Health & Safety Code Section 116875) and Vermont Act 193 lead-free compliance. It also carries NSF P-1 registration number 121265 for use in federally inspected meat and poultry plants, meets U.S. military specification TT-S-1732, is listed under the Uniform Plumbing Code at IAPMO file 1282, and holds a UK Water Fittings and Materials Directory listing under British Standard 6920 Part 2. That is the certification stack an inspector expects to see on a potable-water joint — and V-2 delivers it in a single tube. The service window is -70°F (-57°C) to 500°F (260°C), with brushability retained all the way down to 0°F (-18°C) — a real-world advantage for outdoor wintertime connections. On pressure, V-2 is rated up to 10,000 psi on liquids and 2,000 psi on gases. The UL of Canada listing sets media-specific maxima on pipe up to 3½ inches in diameter: 1,500 psi for natural gas and methane, 250 psi for propane and butane, 175 psi for water, and 145 psi for diesel and petroleum oils. V-2 also completed a natural-gas pressure test at 2,250 psi over ten consecutive days at 73°F, and it earns a 1A copper-strip corrosion rating per ASTM D4048. One hard limit: V-2 is not approved for oxygen lines. Physically, V-2 is an ivory/beige semi-fluid with a specific gravity of 1.38 and a Brookfield viscosity of 160,000–240,000 cps (No. 7 spindle, 5 rpm at 77°F) — thick enough to stay on threads during assembly but brushable for field application. The PTFE and natural fillers add lubrication that tightens joint make-up, the product is nontoxic, water-resistant, non-staining, and low-odor, and it allows immediate pressurization after assembly. Shelf life is a minimum five years from manufacture, so you can stock it without worrying about a product going bad on the shelf between seasonal shutdowns. Substrate coverage is broad: stainless steel, aluminum, brass, copper, iron, polyethylene, reinforced fiberglass, and PVC are all approved. The two exceptions are ABS and CPVC — for those plastics, spec the Jet-Lube TFW Thread Sealant with PTFE instead: https://www.pe-energy.com/product/24023-tfw/ Matching sealant to substrate is the most common selection error the V-2 data sheet flags, so keep TFW on the truck alongside V-2 when mixed plastic systems are in play. For heavier-duty connections in the same code-compliant family, step up to V-2 Plus: https://www.pe-energy.com/product/35623-v-2-plus/ High-volume pipe work is served by Jet-Lube TF-15, available by the gallon at https://www.pe-energy.com/product/jet-lube-tf-15-1-gallon/ Browse the complete JetLube catalog — sealants, thread compounds, and more — at https://www.pe-energy.com/brand/jet-lube/ For procurement teams writing specs or RFPs on potable-water, gas, or petroleum-service threaded connections, V-2's compliance portfolio — NSF 61, NSF P-1 #121265, AB1953, TT-S-1732, IAPMO #1282, BS 6920 — covers the documentation requirements across municipal, food-processing, and industrial accounts in a single line item. Wholesale orders scale from a single spare to a full fleet rollout. Build V-2 into your next MRO contract and eliminate the last-minute sealant substitution that fails an inspection. Resources https://gravatar.com/peenergymx https://gravatar.com/taylorindustrialequipment