Skip to content
KH 385: Lithium Powered, UPS Raspberry Pi Case - LiPi: A self-contained, battery powered Raspberry Pi NUC episode artwork

Jun 7, 2018 1 hr 7 min

KH 385: Lithium Powered, UPS Raspberry Pi Case - LiPi: A self-contained, battery powered Raspberry Pi NUC

from Know How... (Video) Hosted by TWiT

The Raspberry Pi is an amazing device that can be everything from a server to a game machine, but have you ever wanted to have a self-contained, portable unit? Or maybe a server NUC with a built-in uninterruptible Power Supply? On this episode of Know How, Patrick and Padre take you through the steps of creating a "LiPi" which can give you up to 12 hours of power for your RasPi while also acting as an auto-switching UPS that can run on 6-26 volts! Project Summary: We've done several RasPi projects this year that could bennefit from an independent power source. (The TorPi, the Pi-Hole, The RetroPi) -- We want to create a power system that can act BOTH as a power system AND an uninterruptible power system. Project Requirements: Must have a way to power the RasPi WITHOUT using the USB connector Must have a way to switch from line power to battery power AND BACK without disrupting operation. Must have a way to turn OFF power completely (to prevent draining the battery pack) Must operate or more than 3 hours NUC sized Should have a way to gracefully power-down the Pi Must have a way to swap the SD card without dissasembly LiPi Parts Raspberry Pi 3 ~$35 5V UBEC (Hobbywing - Accepts 5.5 - 26V) ~$3 3 x 18650 LiPo Cells (3800mAh) ~$8 5.5MM x 2.1mm DC Power Jack ~$1 Rocker Switch ~$12 Momentary Switch ~$5.59 Lithium Ion Battery Charger w/Protection ~$1 JST Connectors ~$0.60 Walkera Connectors (x 3) ~$0.40 Total: ~$51 Power Calculations: ~5 Watt/Hours Each Cell can provide (3800 x 3.7 = ) ~14 Watt/Hours We have ~42 Watt/Hours of capacity But we don't run down all the way... 30% is when the protection circuit will kick in. So we should count on 29 Watt hours of USABLE power 29 / 5 = Just under 6 hours AT FULL POWER Shutting down WiFi/Bluetooth and not pegging 100% power should give us close to 8 hours. The 3D design can be found at the following link: https://www.tinkercad.com/things/dStBlNXSDlK#/ These show notes have been truncated due to length. For the full show notes, visit https://twit.tv/shows/know-how/episodes/385 Hosts: Fr. Robert Ballecer, SJ and Patrick Delahanty Sponsors: Ring.com/KNOWHOW eero.com code KNOWHOW

Episode details come from the podcast's RSS feed.

Embed this episode

Ready to play

KH 385: Lithium Powered, UPS Raspberry Pi Case - LiPi: A self-contained, battery powered Raspberry Pi NUC

0:00 1:07:28

No transcript yet.

Requests help us decide what to transcribe next.

Frequently asked questions

How long is this episode of Know How... (Video)?

This episode is 1 hour and 7 minutes long.

When was this Know How... (Video) episode published?

This episode was published on June 7, 2018.

Can I download this Know How... (Video) episode?

Yes. Use the download control on the episode player to save the publisher-provided media file.