Running out of things to do ...

Foundations of Amateur Radio So, there's nothing on TV, the bands are dead, nobody is answering your CQ, you're bored and it's all too hard. You've run out of things to try, there's only so many different ways to use the radio and it's all too much. I mean, you've only got CW, AM, SSB, FM, there's Upper and Lower Side-band, then there's RTTY, the all too popular FT8, then there's WSPR, but then you run out of things. I mean, right? What about PSK31, SSTV, then there's AMTOR, Hellschreiber, Clover, Olivia, Thor, MFSK, Contestia, the long time favourites of Echolink and IRLP, not to forget Fusion, DMR, D-STAR, AllStar, BrandMeister or APRS. So far I've mentioned about 20 modes, picked at random, some from the list of modes that the software Fldigi supports. Some of these don't even show up on the Signal Wiki which has a list of about 70 amateur modes. With all the bands you have available, there's plenty of different things to play with. All. The. Time. There's contests for many of them, so once you've got it working, you can see how well you go. Over the past year I've been experimenting with a friend with various modes, some more successful than others. I'm mentioning this because it's not difficult to get started. Seriously, it's not. The most important part of this whole experiment is getting your computer to talk to your radio. If you have FT8 already working you have all the hardware in place. To make the software work, you can't go past installing Fldigi. As a tool it works a lot like what you're familiar with. You'll see a band-scope, a list of frequencies and a list of decodes. It's one of many programs that can decode and generate a multitude of amateur digital modes. If this is all completely new to you, don't be alarmed. There are essentially two types of connections between your computer and your radio. The first one is audio, the second is control. For this to work well, both these need to be two-way, so you can both decode the audio that the radio receives and generate audio that the radio can transmit. The same is true for the control connection. You need to be able to set the transmit frequency and the mode and you need to be able to read the current state of the radio, if only to toggle the transmitter on-and-off. If you already have CAT control working, that's one half done. I've spoken with plenty of amateurs who are reluctant to do any of this. If this is you, don't be afraid. It's like the first time you keyed up you radio. Remember the excitement? You can relive that experience, no matter how long you've been an amateur. Depending on the age of your radio, you might find that there is only one physical connection between your computer and the radio, either using USB or even Ethernet. You'll find that your computer will still need to deal with the two types of information separately. Notice that I've not talked about what kind of operating system you need to be running. I use and prefer Linux, but you can do this on any operating system, even using a mobile phone if that takes your fancy. Getting on air and making noise using your microphone is one option, but doing this using computer control will open you to scores of new adventures. I will add some words of caution here. In general, especially using digital modes, less is more. If you drive the audio too high you'll splatter all over the place and nobody will hear you, well, actually, everyone will, but nobody will be able to talk to you because they won't be able to decode it. If the ALC on your radio is active, you're too loud. WSJT-X, the tool for modes like FT8 and WSPR, has a really easy way of ensuring that your levels are right, so if you've not done anything yet, start there. Another issue is signal isolation. What I mean by that is you blowing up your computer because the RF travelled unexpectedly back up the serial or audio cable and caused all manner of grief. You can get all fancy with optical isolation and at some point you should, but until then, dial the power down to QRP levels, 5 Watts, and you'll be fine. A third issue that was likely covered during your licensing is the duty cycle. It's the amount of time that your radio is transmitting continuously as compared to receiving only. For some modes, like WSPR for example, you'll be transmitting for a full 2 minutes at 100%, so you'll be working your radio hard. Even harder might unexpectedly be using FT8, which transmits in 15 second bursts every 15 seconds, so there may not be enough time for your radio to cool down. Investing in a fan is a good plan, but being aware of the issue will go a long way to keeping the magic smoke inside your radio. I'm sure that you have plenty of questions after all that. You can ask your friends, or drop me an email, [email protected] and I'll be happy to point you in the right direction. Next time there's nothing good on TV, get on air and make some digital noise! I'm Onno VK6FLAB