EPISODE · Aug 21, 2017 · 38 MIN
Sound Devices MixPre-3 Review
from podcastcoach · host podcastcoach
Full show notes can be seen at www.schoolofpodcasting.com/580 Why Keeping It Simple is a Good idea I do a show every Saturday call Ask the Podcast Coach with Jim Collison from theaverageguy.tv and at one point I decided to connect with Jim over Google hangouts, as well as have a Call In Number for the phone. I had to send a mix to Jim that had myself and the caller (but not Jim) while sending a mix to the caller than had myself and Jim (but not the caller). For those up on the lingo, I had to configure two mix minuses. I needed a mixer with two auxiliary outs. I found the Behringer X1832. It did the job well. I had a ton of extra channels, and effects that I never used. Then we switched and instead of using a phone (using CallinStudio.com) we went to a chat window to take questions. This was simple and free (using chatwing.com) . So now I have a giant mixer taking up half my desk, and I was looking for an alternative. I have a Yamaha MG102c Mixer (which has been replaced by the MG10XU) that would do the job. For whatever reason, I just didn't like it. It seemed like I had to crank everything up to the max. It still had a clean sound, but it seemed like I really had to push everything. I realize this is stupid (cause you should vote with your ears, not your eyes) but I've been hesitant to go back to it. The Other Problem with Recording Levels I use a Zoom H5. A great device with a giant screen. However, due to the way the studio is setup with the majority of the light coming in from Behind the Zoom H5 I cant' really get a clear reading. While there are lights to let me know when things are peaking, I tend to feel those are too sensitive. Then I heard about the Sound Devices MixPre-3. This might solve all my problems. Bad Time for a Product Review I received the Sound Devices MixPre-3 this week. It's horrible timing as I'm getting ready to run off to Podcast Movement, and I'm busy packing, buying Dramamine, recording podcasts and won't have time to do a super deep dive. So here is what I want it to do: Power my Electrovocie RE320 without a ton of his I want to do a mix minus for when I do shows with a co-host via skype or Google hangouts I want to plugin my ipad to play sound effects. First Impressions Of the Mix Pre-3 WOW IS THIS THING SMALL. I have an iPhone 6s, and it might be an inch wider, but it is the size of an iPhone on steroids. VERY COOL. At first, I was worried about the touchscreen display. But the display is super clear, and you can adjust the brightness. I had no problems reading it. I was worried about the touchscreen is small. That didn't seem to be an issue (I'm a guitar player with long fingers and not very fat). I almost didn't need the manual. I plugged in a microphone, hit record and was up and running. Using it as an Interface - WHY AM I DRUNK? I went into Hindenburg Journalist and did a recording. it was nice and clear, but I sounded slightly drunk as my voice was lower (as if the sound had been slowed down). I launched Adobe Audition and got the same issue. Hmmm. As I'm on a PC, I right-clicked on the Speaker in the bottom right-hand corner of my screen and went to the Properties of the Mix Pre-3. I had to set the recording and playback to 2 channel 24 bit, 48K. This solved the issue, and everything sounded fine. How Do I Setup a Mix Minus? I was able to set the input of Channel 2 to USB-1, and I could now hear my Skype caller. I was on Channel 3, and life was good. How do I go about making sure that the sound of the caller does not go back to the caller? I look at the output, and all the output routing is for the stereo out mix. Where do I adjust what goes back to the caller? I looked, and looked, and headed to YouTube. They have a video on the Sound Devices website, but they just said, "Set the input and out to the MixPre-3. My thought was, Yeah, but then what. Finally, I saw a video that explained you can't route what is going back to the USB output, and that you don't need...
What this episode covers
Full show notes can be seen at www.schoolofpodcasting.com/580 Why Keeping It Simple is a Good idea I do a show every Saturday call Ask the Podcast Coach with Jim Collison from theaverageguy.tv and at one point I decided to connect with Jim over Google hangouts, as well as have a Call In Number for the phone. I had to send a mix to Jim that had myself and the caller (but not Jim) while sending a mix to the caller than had myself and Jim (but not the caller). For those up on the lingo, I had to configure two mix minuses. I needed a mixer with two auxiliary outs. I found the Behringer X1832. It did the job well. I had a ton of extra channels, and effects that I never used. Then we switched and instead of using a phone (using CallinStudio.com) we went to a chat window to take questions. This was simple and free (using chatwing.com) . So now I have a giant mixer taking up half my desk, and I was looking for an alternative. I have a Yamaha MG102c Mixer (which has been replaced by the MG10XU) that would do the job. For whatever reason, I just didn't like it. It seemed like I had to crank everything up to the max. It still had a clean sound, but it seemed like I really had to push everything. I realize this is stupid (cause you should vote with your ears, not your eyes) but I've been hesitant to go back to it. The Other Problem with Recording Levels I use a Zoom H5. A great device with a giant screen. However, due to the way the studio is setup with the majority of the light coming in from Behind the Zoom H5 I cant' really get a clear reading. While there are lights to let me know when things are peaking, I tend to feel those are too sensitive. Then I heard about the Sound Devices MixPre-3. This might solve all my problems. Bad Time for a Product Review I received the Sound Devices MixPre-3 this week. It's horrible timing as I'm getting ready to run off to Podcast Movement, and I'm busy packing, buying Dramamine, recording podcasts and won't have time to do a super deep dive. So here is what I want it to do: Power my Electrovocie RE320 without a ton of his I want to do a mix minus for when I do shows with a co-host via skype or Google hangouts I want to plugin my ipad to play sound effects. First Impressions Of the Mix Pre-3 WOW IS THIS THING SMALL. I have an iPhone 6s, and it might be an inch wider, but it is the size of an iPhone on steroids. VERY COOL. At first, I was worried about the touchscreen display. But the display is super clear, and you can adjust the brightness. I had no problems reading it. I was worried about the touchscreen is small. That didn't seem to be an issue (I'm a guitar player with long fingers and not very fat). I almost didn't need the manual. I plugged in a microphone, hit record and was up and running. Using it as an Interface - WHY AM I DRUNK? I went into Hindenburg Journalist and did a recording. it was nice and clear, but I sounded slightly drunk as my voice was lower (as if the sound had been slowed down). I launched Adobe Audition and got the same issue. Hmmm. As I'm on a PC, I right-clicked on the Speaker in the bottom right-hand corner of my screen and went to the Properties of the Mix Pre-3. I had to set the recording and playback to 2 channel 24 bit, 48K. This solved the issue, and everything sounded fine. How Do I Setup a Mix Minus? I was able to set the input of Channel 2 to USB-1, and I could now hear my Skype caller. I was on Channel 3, and life was good. How do I go about making sure that the sound of the caller does not go back to the caller? I look at the output, and all the output routing is for the stereo out mix. Where do I adjust what goes back to the caller? I looked, and looked, and headed to YouTube. They have a video on the Sound Devices website, but they just said, "Set the input and out to the MixPre-3. My thought was, Yeah, but then what. Finally, I saw a video that explained you can't route what is going back to the USB output, and that you don't need...
NOW PLAYING
Sound Devices MixPre-3 Review
No transcript for this episode yet
Similar Episodes
Jun 4, 2025 ·25m
May 7, 2025 ·41m
Mar 5, 2025 ·0m