PodParley PodParley

Tom and Tracy are Back!

Episode 468 of the WTFFF?! 3D Printing Podcast Volume Three: 3D Print Tips | 3D Print Tools | 3D Start Point podcast, hosted by Tom Hazzard & Tracy Hazzard, titled "Tom and Tracy are Back!" was published on August 1, 2017 and runs 9 minutes.

August 1, 2017 ·9m · WTFFF?! 3D Printing Podcast Volume Three: 3D Print Tips | 3D Print Tools | 3D Start Point

0:00 / 0:00

We are back. We were gone a lot longer than we thought. It was one of those things where in April, things just started to get overwhelming with everything that we have going on in our business, in our personal lives. We thought it was going to be a short hiatus and then it turned into a bit of a longer hiatus. We realized we’ve never taken a vacation from our 3D print podcast since we started it.

We really appreciate your patience with us and that you’re back with us as well. Thanks again guys, for all the support in the interim. We are going to do our very best to bring you great new episodes with lots of energy and lots of new angles and topics.

To send us a message, go to 3dstartpoint.com or shoot us a message at [email protected] or on our facebook or twitter! Its absolutely free, so ask away and and don’t forget to subscribe so you can hear more on our regularly scheduled Thursday podcast episodes!

No similar episodes found.

No similar podcasts found.

URL copied to clipboard!