Universal Defrost Controls w/ Jim Fultz episode artwork

EPISODE · Feb 17, 2021 · 52 MIN

Universal Defrost Controls w/ Jim Fultz

from HVAC School - For Techs, By Techs

In this podcast episode, Jim Fultz with White-Rodgers joins us to discuss universal defrost controls. He also explains when and why you might use universal controls. Bryan and Jim cover a universal defrost control for heat pumps (Model #: 47D01U-843). You can follow along by reading the manual HERE. Universal defrost controls can replace OEM defrost controls. Universal controls are sometimes more readily available than OEM parts, so they can be good repair options.  The White-Rodgers universal heat pump defrost control comes with the board, installation instructions, two wiring harnesses, two thermistor-style sensors, and a bag with screws, wire nuts, and other mounting materials. This particular control is compatible with 400 different product SKU numbers, so it's a versatile replacement. The display of the White-Rodgers universal heat pump defrost control gives a lot of feedback; it has orientation options and can communicate more information than mere flashing LEDs. You'll have to set the display orientation in an ideal position, but the controls will help you out with that. You'll also want to keep these defrost controls out of the sun, away from snow, and on the back of the unit. If you don't already have an outdoor coil temperature sensor set up, then you'll want to install the sensor at the bottom of the condensing unit coil. As far as the actual defrost options go, you can set seven different options that correspond to specific manufacturers' controls (OEM Quick Setup). The short cycle time, reversing valve, time delay, and maximum defrost times can be tailored to each manufacturer's equipment. Jim and Bryan also discuss: Spade connections Wiring diagrams for the universal defrost control Outdoor thermostat and electric heat Oil behavior Demand defrost Annual energy savings Table settings Reversing valve shift delay time Auxiliary heat Low-temperature compressor cutout Brownout protection Force-initiation   Learn more about Refrigeration Technologies HERE. If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Episode metadata supplied by the publisher feed · Published Feb 17, 2021

Embed this episode

NOW PLAYING

Universal Defrost Controls w/ Jim Fultz

0:00 52:20

No transcript for this episode yet

We transcribe on demand. Request one and we'll notify you when it's ready — usually under 10 minutes.

No similar episodes found.

No similar podcasts found.

Frequently Asked Questions

How long is this episode of HVAC School - For Techs, By Techs?

This episode is 52 minutes long.

When was this HVAC School - For Techs, By Techs episode published?

This episode was published on February 17, 2021.

Can I download this HVAC School - For Techs, By Techs episode?

Yes. Use the download control on the episode player to save the publisher-provided media file.
URL copied to clipboard!