Virtual Reality and 3D Printing

An episode of the WTFFF?! 3D Printing Podcast Volume Two: 3D Print Tips | 3D Print Tools | 3D Start Point podcast, hosted by Tom Hazzard & Tracy Hazzard, titled "Virtual Reality and 3D Printing" was published on November 8, 2016 and runs 31 minutes.

November 8, 2016 ·31m · WTFFF?! 3D Printing Podcast Volume Two: 3D Print Tips | 3D Print Tools | 3D Start Point

0:00 / 0:00

Episode Description

Attending the FutureX Live Conference hosted by Moxie showed us how brands can look at the future of advertising and marketing, to include a combo of virtual reality and 3D printing. Recapping some of the ideas the keynote speakers had on how the 3D print industry can take notes from the early days of virtual reality from as far back at the 1920s where the industry was damaged from bad content, but how getting out of the hype cycle actually drove that industry forward. Is that the stage the the 3D printing industry is in now?

To send us a message, go to 3dstartpoint.com or shoot us a message at [email protected] or on our facebook or twitter! Its absolutely free, so ask away and and don’t forget to subscribe so you can hear more on our regularly scheduled Thursday podcast episodes!

Share this episode

Similar Episodes

Volume 3 Wrap-Up For The WTFFF 3D Print Podcast With Tom Hazzard & Tracy Hazzard

May 22, 2020 ·7m

3D Printed Echo Dot Holder Project

Feb 7, 2019 ·37m

CES 2019 3D Printing Recap

Jan 30, 2019 ·40m

3D Printing In The STEM Education Curriculum with Brian Bobbitt and Jacob Spurling

Dec 12, 2018 ·35m

Girl STEM Education with MakerGirl with Mary Hadley

Nov 14, 2018 ·31m

How Import Tariffs May Accelerate 3D Printed Consumer Goods with Steve Crimi

Oct 3, 2018 ·33m

Similar Podcasts

WTFFF?! 3D Printing Podcast Volume Three: 3D Print Tips | 3D Print Tools | 3D Start Point Tom Hazzard & Tracy Hazzard This is the Third 200 episodes of the WTFFF?! 3D-Printing Podcast. WTFFF?! Co-hosts Tom & Tracy Hazzard focus on the what of Fused Filament Fabrication (3D Printing), what design software to use, what printer to buy, what tools to use, what designs should you print, what new materials are out and what your business strategy should be. On the 3D Printing Podcast, they interview the who is who in 3D Print art and design along with others who can help you figure out your what. They share with you how others in the field are creating successful designs and their own how to tools and tips and strategies for integrating 3D Printing into your business, home or classroom. WTFFF?! 3D Printing Podcast Volume One: 3D Print Tips | 3D Print Tools | 3D Start Point Tom Hazzard & Tracy Hazzard This is the First 200 episodes of the WTFFF?! 3D-Printing Podcast. WTFFF?! Co-hosts Tom & Tracy Hazzard focus on the what of Fused Filament Fabrication (3D Printing), what design software to use, what printer to buy, what tools to use, what designs should you print, what new materials are out and what your business strategy should be. On the 3D Printing Podcast, they interview the who is who in 3D Print art and design along with others who can help you figure out your what. They share with you how others in the field are creating successful designs and their own how to tools and tips and strategies for integrating 3D Printing into your business, home or classroom. WTFFF?! 3D Printing Podcast: Digital Manufacturing From Design to Print Tom Hazzard & Tracy Hazzard The 3D printing industry has gone through a lot of major innovations since the first WTFFF episode was recorded, more than six years ago. When one of the 3D industry leaders, HP, asked hosts, Tom Hazzard and Tracy Hazzard to take a new look at where the 3D print industry is today, they jumped at the chance to get an inside tour into global trends, education, creativity, and design, and an opportunity to cover all aspects of the HP Create Ecosystem from design to print, including 3D design, XR visualization and digital manufacturing. Meet some of the most brilliant, amazing people who are passionate about 3D design and improving the creative workflow for themselves and for their customers. Whether you’ve used HP 3D printers before or not, there is something in this series for everyone. Join the conversation and send in your questions and comments! We’re talking ingenuity, innovation, and creation – the whole process!In collaboration with HP, Tom and Tracy Hazzard have Luxe slagroom Georgia Nederlandse tiener in Belgische heilige kut school met een eigen kut mening die veelste veel scheld. Ik maak deze podcast voor mezelf over 9 jaar want dan ben ik mf 22 wtfff!!! Ik denk en hoop dat mijn leven heeeel interessant is (haha) en je veel cringe plezier hebt ❤️

URL copied to clipboard!