What Tools Do I Get?

This podcast is dedicated to helping people get into and being successful in the HVAC filed. This is from my perspective as a residential HVAC contractor. In this episode I go over what tools you should get to start out with. Here is a list of tools I give to all of my techs. I have marked with an * which tools I went over in this podcast. Hand tools nut driver 1/4" nut driver 5/16" nut driver 3/8" nut driver 1/2" 11 in 1 Klein tool *Klein 8-in-1 HVAC Slide Drive tool Philips head screw driver *flat head screw driver Side cutter pliers *needle nose pliers (Knipex KN1301160) linesman pliers red handled wire strippers 8" channel locks *Klein V-Jaw pliers 6" crescent wrench *8" crescent wrench wide mouth Pipe wrench 9 mm socket or nut driver 11 mm socket or nut driver Square ratchet wrench service tool *Service tool Schrader replacement tool (Apion) *Tool bag (Veto Pro Pack TB4B) Electric tools cordless hammer drill *bits 1/4" 5/16" 3/8" (long and short) (1/4" and 5/16" Reversible Magnetic Hex Chuck Driver (6" Long)) *Cordless impact *Field piece multi-meter (SC260) *contact-less voltage tester (Klein NCVT-3) AC tools *Digital gauges (Testo 550) set of hoses with one extra (Yellow Jacket) *tubing cutters (Ridgid Model 118) de-burring tool Vacuum pump 5 cfm or better Charging Scale Nitrogen tank Nitrogen regulator Torch set Torch tanks Fan Blade Puller INSTALL TOOLS sheet metal cutters left and right sheet metal hammer PVC cutters