Skip to content
Hackaday Podcast podcast artwork

Hackaday Podcast

by Hackaday

Hackaday Editors take a look at all of the interesting uses of technology that pop up on the internet each week. Topics cover a wide range like bending consumer electronics to your will, designing circuit boards, building robots, writing software, 3D printing interesting objects, and using machine tools. Get your fix of geeky goodness from new episodes every Friday morning.

From the show's RSS feed, refreshed Nov 14, 2026. Source feed.

Subscribe Bookmark

Episodes

  1. Ep 394: Linux in Weird Places, Yet More Hidden SDRs, and a Supercon Wrapup

    Hackaday Editors Elliot Williams and Tom Nardi are back from Supercon, and they've got plenty of thoughts to share about it. But before they discuss this weekend's higlights, they'll cover the recent scuttling of the legendary SS United States, the discovery of even more hidden software-defined...

  2. Ep 393: Epaper, Tamagotchi Hacks, and Supercon Talks Galore

    This week's podcast comes from Europe, as Elliot Williams is joined by Jenny List, who wishes to apologies for the poor sound quality from her headset microphone. The news this week is our Supercon conference which is upcoming, we've released more speaker details. We start the hacks with a...

  3. Ep 392: Microscopes, Drones, and Other DIY Things

    Hackaday Editors Elliot Williams and Al Williams met to review the week in Hackaday. Turns out, it was a week for tiny things, cybersecurity, nostalgia, and projects that would have been nearly impossible for the average hacker not that long ago. But first, you can hear a little about the…

    more
  4. Ep 391: Tuned in to ESP32 SDR, New Old Pagers, and Bugs on Mars

    Hackaday Editors Elliot Williams and Tom Nardi start this episode off with a discussion about Philadelphia's budding hacker conference and the imminent retirement of the EZ80. After considering the parallels between the wide world of aviation headsets and our personal projects, talk moves on to…

    more
  5. Ep 390: DOOM, Cranium Stuff, and Odd OpenSCAD Opportunities

    This week, Elliot Williams and Kristina Panos met a few minutes later than usual, and somehow defeated a buzz together with the power of will before settling into the news, rifling through the Mailbag, and otherwise creating the attached podcast. So, the news. Amazon, in their infinite wisdom…

    more
  6. Hackaday Podcast Ep 389: Spinning Lightfield Displays and Jenny Visits a Blast Furnace

    Another all-European podcast for you this week, as Elliot Williams is joined by Jenny List for an evening looking at the past week in Hackaday. And this week there is a particularly good selection to look at. A while back we showed you a project that put synthetic aperture radar on a drone,...

  7. Ep 388: RAM-Swapping on Raspberry Pi, Raindrops on Radar, and a Fine Mesh

    This week, Hackaday Editors Elliot Williams and Al Williams had a lot to talk about. From advice for a young hacker to using a laser to break into a microcontroller, there was plenty to cover from the week in Hackaday. From the "Point/Counter Point" department, there were dueling posts about how...

  8. Ep 387: Superhuman Clocks, CAN in USB-C, and the Joys of Bare Metal

    This week, Hackaday Editors Elliot Williams and Tom Nardi start the episode off by discussing the latest CircuitPython developments before covering some impressive reverse engineering efforts, the benefits of modeling your projects in 3D, and some of the most incredible timepieces that have ever...

  9. Ep 386: Doomscroll Tamagotchis, Clavichords, and Vibrotrucks

    In this specially-numbered podcast episode that lines up quite nicely with our Retrocomputing Challenge, Elliot Williams and Kristina Panos met over surprisingly low-latency and loud beverages to bring you the best of the previous week's hacks. But first, the news. German company Isar Aerospace…

    more
  10. Ep 385: 3D Printers with Lasers, Wicked RAM Prices, and Reverse Polish Notation

    As the calendar turns a leaf into September, Elliot Williams is joined by Jenny List for our weekly look at all things Hackaday. In the news, our retrocomputing competition is well under way, but there's plenty of time to get an entry in if you've got a cool old-style project to show us. And then...

  11. Ep 384: OCR MOD Records, Magical PCBs, and the Gravity of Space Stations

    What did Hackaday editors Elliot Williams and Al Williams read in Hackaday last week? Probably everything, but you can tune in and hear about their favorites on this week's podcast. They heard from lots of listeners this week, and also saw DIY projects running from a 3D-printed Stirling engine…

    more
  12. Ep 383: QR Codes, Caving Gear, and the Old School Way to Learn Electronics

    In this week's episode, Hackaday Editors Elliot Williams and Tom Nardi start things off by getting excited about the recently announced 2026 Retrocomputing Challenge. From there the conversation will cover efforts to improve desktop 3D printing with lasers, an expensive grill with an ESP32...

  13. Ep 382: Glueballs, Borg Cubes, and Supersonic Trebuchets

    It's still hot on both sides of the Atlantic, but Kristina has a new secret weapon for staying cool without making noise. Will Elliot and the others follow suit? Time will tell. In Hackaday news, well, there's a lot of it. For starters, Supercon Ten tickets went on sale Thursday morning, but...

  14. Ep 381: Airless Tires, Full-color Prints, and 28 MW of LEDs

    This week's Hackaday podcast is a European affair again, as Elliot Williams is joined by Jenny List on a summer evening to review the week. And we have a feast of hacks for your delectation. As the title above says, one of the stand-out hacks this week was a set of airless mountain bike tyres 3D...

  15. Ep 380: 3D Printing the Rainbow, IR and IP Camera Hacks, and Americium 241 on the Loose

    Elliot Williams and Al Williams got together to compare notes on the most interesting posts this week on the site. As usual, there are just too many choices, so you'll have to settle for just the few that can fit in a podcast. The guys were excited about 3D printing -- both FDM and SLA -- as well...

  16. Ep 379: Driving E-ink DIY, NES on ESP, and the Other IRC

    On this episode, Hackaday editors Elliot Williams and Tom Nardi discuss their love of electronic paper, clunky cartridges, and keeping old games alive by any means possible. You'll also hear about getting the most out of the sensors in our 3D printers, playing with X-rays at home, a ring that…

    more
  17. Ep 378: C Coders, Ceramic Printers, and Shadow Archives

    It's a hot one at both microphones, as Elliot Williams and Kristina Panos wilt in the heat with ice lollies and freezer packs. But still, we persevered long enough to make a podcast. In Hackaday news, Supercon is on! It's going down in Pasadena, California, but the talks will be somewhere…

    more
  18. Ep 377: Parallel Pixels, Wiggly Consoles, and Seven Segments

    This week's podcast sees Elliot joined by Jenny List, as both suffer silently in the European summer heat as the sound of a desk fan would come over on the recording. The stand-out hack of the week comes from [Bitluni], whose GPU made from thousands of cheap microcontrollers is on a scale we've...

  19. Ep 376: Modern Retro Projects, Retro Modern Projects, and the Teen Years for 3D Printing

    Hackadya's Elliot Williams and Al Williams were in a retro mood this week. There was a new '486 computer, a new mechanical TV, and a USB stick with a magnetic personality. Can you watch YouTube on a Game Boy? Maybe. For the can't miss articles, this week, Elliot and Al reflected on the awkward...

  20. Ep 375: Rebuilding Tech on Our Terms and the Hero Nerd

    In this episode, Hackaday editors Elliot Williams and Tom Nardi start off by taking a trip down the Raspberry Pi memory lane and then tackle a fresh pile of listener mail. The discussion moves on to hacking bike counter, homebrew upgrades to the Nintendo Entertainment System, and building RAM…

    more
  21. Ep 374: Flippin' Phones, Sexy Spraysers, and Frikkin' Lasers

    Things are back to normal around the Podcast studio, and this week you'll hear the dulcet tones of Elliot Williams and Kristina Panos. In Hackaday news, we still have a Frikkin' Lasers Challenge going on, and now you can even enter your project into it! Join the ranks, won't you? Not only do we...

  22. Ep 373: GPS, Danger In Space, and Robby the Robot

    Last week, Elliot got his foot stepped on by a 1.5 metric ton draft horse, and boy is he glad to be back to the relative safety of podcasting! Joining him today is Jenny List, no stranger to farm life, who has been trodden by a cow. It's going to be one of those podcasts, folks. Another thing the...

  23. EP 372: Pop Tubers, Shifty Semiconductors, and Shelving Shelf Labels

    This week, we're shaking things up a little, with Tom Nardi still in the host seat, and someone besides Al Williams in the other, namely Kristina Panos. In Hackaday news, we have a new Frikkin' Lasers Challenge going on now, although we acknowledge that no one can actually enter their project…

    more
  24. EP 371: Space Computers, Spy Phones, and So Long CHU

    Elliot Williams is out where the deer and the antelope play for the next week, so it's up to Tom Nardi and Al Williams to wrangle this episode of the Hackaday Podcast. They'll start off by reading some listener messages before talking about the slow extinction of time broadcasts, Linux on cheap...

  25. Ep 370: Softer Cyberdecks, a Simulated Clutch, and an Overstuffed Mailbox

    With Elliot back from Hackaday Europe, he and Al Williams had a lot to talk about with two weeks of Hackaday posts to catch up on. Not to mention the mailbag was overflowing. This week, the guys look at girlie cyberdecks, a 3D printed circuit board, and talk electric motorcycles. Is 3D printing...

  26. Ep 369: IR, E-Ink, and Avgas

    In this episode, Hackaday Editors Elliot Williams and Tom Nardi start things off by discussing the latest reason that cheap PCB fabrication isn't quite as cheap as it once was. The conversation will then move on to hacking electronic shelf labels, stylish e-ink status displays, cutting metal at...

  27. Ep 368: A Pencil that Draws Against You, 3D Printing Stuff, and Tablet, Shmablet!

    This week, Hackaday's Elliot Williams and Kristina Panos met up over the international tubes to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so. Regarding Hackaday Europe, we announced the last round of speakers and...

  28. Ep 367: Radioactive Weather, Continuous Pickles, and Moon Junk

    When Elliot Williams and Al Williams compare their notes on the week in Hackaday, you know you'll get at least one or two bad puns. How bad? Tune in and find out. This week, Tom Nardi visits several in-person events, and Elliot and Al talk about smart buttons, Itanium, ejecting things from a...

  29. Ep 366: DOOM on a Toaster, Music in LED Strips, and Old Drives in New Clothes

    It's the evening before publication, and a pair of Hackaday writers convene to record the week's podcast. This week Elliot Williams is joined by Jenny List, and it's a bumper episode! Of course, a bit of Hackaday news makes the cut, as it's time to make an entry in the Green Powered Challenge.…

    more
  30. Ep 365: Early 3DP Engineering, a New CAD Interface, and Flying Around the Moon

    Humans flew around the Moon this week, but Hackaday Editors Elliot Williams and Tom Nardi were stuck on Earth -- luckily, there was no shortage of stories and hacks to keep them occupied. From the news that Linux might be putting the i486 out to pasture, to the fascinating potential of the...

  31. Ep 364: Clocks, Cameras, and Free Will

    This week, Hackaday's Elliot Williams and Kristina Panos met up over assorted beverages to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so. In the news, there's quite a bit to talk about. Regarding Hackaday Europe, you...

  32. Ep 364: Clocks, Cameras, and Free Will

    This week, Hackaday's Elliot Williams and Kristina Panos met up over assorted beverages to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so. In the news, there's quite a bit to talk about. Regarding Hackaday Europe, you...

  33. Ep 364: Clocks, Cameras, and Free Will

    This week, Hackaday's Elliot Williams and Kristina Panos met up over assorted beverages to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so. In the news, there's quite a bit to talk about. Regarding Hackaday Europe, you...

  34. Ep 363: The History of PLA, Laser DIY PCBs, and Corporate Craziness

    What did Elliot Williams and Al Williams read on Hackaday last week? Tune in and find out. After a bit of news, [Vik Oliver] chimes in with some deep PLA knowledge. Then the topic changed to pressure advance measurements, SDRs, making super-resolution PCBs with a fiber laser, and more. Want to 3D...

  35. Ep 362: Compression Molding, IPv4x, and Wired Headphones

    As the sun goes down on a glorious spring evening on the western edge of Europe, Elliot Williams is joined by Jenny List for a look at the week in all things Hackaday. First up: Hackaday Europe tickets are on sale! Bad luck folks, the early bird tickets disappeared in an instant, but regular ones...

  36. Ep 361: Hackaday Podcast Mailbag, A Phone is Not a Computer, 3D Printing History is New Again

    Join Hackaday Editors Elliot Williams and Tom Nardi as they cover their favorite hacks and stories from the week. The episode kicks off with some updates about Hackaday Europe and the recently announced Green Power contest, as well as the proposal of a new feature of the podcast where listeners…

    more
  37. Ep 360: Cool Rubber Bands, Science-y Stuff, and the Whys of Office Supplies

    This week, Hackaday's Elliot Williams and Kristina Panos met up over assorted beverages to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so. In the news, we've launched a brand-new contest! Yes, the Green-Powered…

    more
  38. Ep 359: Flying Squids, Edible Passwords, and a CAD Automaton

    Hackaday editors Elliot Williams and Al Williams met up to trade their favorite posts of the week. Tune in and see if your favorites made the list. From crazy intricate automata to surprising problems in Peltier cooler designs, there's a little bit of everything. Should bikes have chains? What's...

  39. Ep 358: Soft Displays, LCD Apertures, and Mind Controlled Toys

    For today's podcast Elliot Williams is joined by Jenny List, and we're pushing the limits of mobile connectivity as Jenny's coming to us from a North Sea ferry. We start by looking forward to the upcoming Hackaday Europe, with a new location in Lecco, Italy. We hope you can join us there! There's…

    more
  40. Ep 357: BreezyBox, Antique Tech, and Defusing Killer Robots

    In the latest episode of the Hackaday Podcast, editors Elliot Williams and Tom Nardi start things off by discussing the game of lunar hide-and-seek that has researchers searching for the lost Luna 9 probe, and drop a few hints about the upcoming Hackaday Europe conference. From there they'll…

    more
  41. Ep 356: Nanoprinting, Vibe Coding, and Keebin' with Kristina, IN HELL!

    This week, Hackaday's Elliot Williams and Kristina Panos met up over coffee to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so. We found no news to speak of, except that Kristina has ditched Windows after roughly 38...

  42. Ep 355: Person Detectors, Walkie Talkies, Open Smartphones, and a WiFi Traffic Light

    Another chilly evening in Western Europe, as Elliot Williams is joined this week by Jenny List to chew the fat over the week's hacks. It's been an auspicious week for anniversaries, with the hundredth since the first demonstration of a working television system in a room above a London coffee…

    more
  43. Ep 354: Firearms, Sky Driving, and Dumpster Diving

    Hackaday Editors Elliot Williams and Al Williams took a break to talk about their favorite hacks last week. You can drop in to hear about articulated mirrors, triacs, and even continuous 3D-printing modifications. Flying on an airplane this weekend? Maybe wait until you get back to read about how...

  44. Ep 353: Fantastic Peripherals, Fake or Not Fake Picos, and Everything on the Steam Deck

    Join Hackaday Editors Elliot Williams and Tom Nardi as they swap their favorite hacks and stories from the week. In this episode, they'll start off by marveling over the evolution of the "smart knob" and other open hardware input devices, then discuss a futuristic propulsion technology you can…

    more
  45. Ep 352: Visualizing Sound, and Windows 11 Is a Dog

    This week, Hackaday's Elliot Williams and Kristina Panos met up over coffee to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous seven days or so. On What's That Sound, Kristina had no idea what was going on, but [Flippin' Heck] knew it…

    more
  46. Ep 351: Hackaday Goes To Chaos Communication Congress

    Elliot was of at Europe's largest hacker convention: Chaos Communication Congress. He had an awesome time, saw more projects than you might think humanely possible, and got the flu. But he pulled through and put this audio tourbook for you. So if you've never been to CCC, give it a listen!

  47. 2025 Holiday Placeholder Edition

    The entire Hackaday crew wishes you happy holidays and a fantastic 2026. You'll hear back from us then, so stay tuned.

  48. Ep 350: Damnation for Spreadsheets, Praise for Haiku, and Admiration for the Hacks In Between

    This week's Hackaday Podcast sees Elliot Williams joined by Jenny List for an all-European take on the week, and have we got some hacks for you! In the news this week is NASA's Maven Mars Orbiter, which may sadly have been lost. A sad day for study of the red planet, but at the same time a chance...

  49. Ep 349: Clocks, AI, and a New 3D Printer Guy

    Hackaday Editors Elliot Williams and Al Williams met up to cover the best of Hackaday this week, and they want you to listen in. There were a hodgepodge of hacks this week, ranging from home automation with RF, volumetric displays in glass, and some crazy clocks, too. Ever see a typewriter that...

  50. Ep 348: 50 Grams of PLA Hold a Ton, Phreaknic Badge is Off The Shelf, and Hackers Need Repair Manuals

    Join Hackaday Editors Elliot Williams and Tom Nardi as they go over their picks for the best stories and hacks from the previous week. Things start off with a warning about the long-term viability of SSD backups, after which the discussion moves onto the limits of 3D printed PLA, the return of…

    more

About this show

Hackaday Editors take a look at all of the interesting uses of technology that pop up on the internet each week. Topics cover a wide range like bending consumer electronics to your will, designing circuit boards, building robots, writing software, 3D printing interesting objects, and using machine tools. Get your fix of geeky goodness from new episodes every Friday morning.

Hosted by

Hackaday

Frequently asked questions

How many episodes does Hackaday Podcast have?

Hackaday Podcast has 405 episodes on PodParley. The most recent episode was published on November 13, 2026.

What is Hackaday Podcast about?

Hackaday Editors take a look at all of the interesting uses of technology that pop up on the internet each week. Topics cover a wide range like bending consumer electronics to your will, designing circuit boards, building robots, writing software, 3D printing interesting objects, and using machine...

How often does Hackaday Podcast release new episodes?

Hackaday Podcast publishes weekly, based on its 405 episodes since December 2018.

Who hosts Hackaday Podcast?

Hackaday Podcast is created and hosted by Hackaday.
Link copied