PODCAST · arts
Reducing Harvest Losses
by Jo Fulwood
A chat with growers and advisors on reducing grain losses in their harvest programs.
Episodes
-
Harvesting in wet conditions
Harvester expert Kassie van der Westhuizen continues the discussion on harvester set, with a focus on how to harvest crops in wet conditions
-
The header is a grain factory
Talking to harvester expert Kassie van der Westhuizen about machine adjustments to minimise losses (particularly in lucerne).
-
Measure, measure and measure again
We calibrate our seeders, we carefully calculate our chemicals, we even count sheep, so why don't we all measure our grain losses? Victorian grower Trevor Stedman talks about the value of measuring losses in high yielding crops.
-
Harvesting in very dry conditions
Latham grower Dylan Hirsch chats to Jo Fulwood about the ins and outs of harvesting in a lower rainfall zone, in very dry conditions.
-
The benefits of chaff decks
Griffiths grower Michael Pfitzner explains why chaff decks are his best harvest weeds seed management system
-
Mic Fels and the Typhoon Part 2
Esperance grower and entrepreneur Mic Fels continues the conversation about about what led him to design and engineer the Typhoon, and why its invaluable to his harvest program.
-
Mic Fels and the Typhoon Part 1
Esperance grower and entrepreneur Mic Fels chats about what led him to design and engineer the Typhoon, and why its invaluable to his harvest program.
-
Harvesting very big crops in high rainfall regions and the importance of measuring losses
Mulwala (NSW) grower Kevin Brooks talks about high yielding crops (both irrigated and dryland) and the challenges these pose during harvest
-
Harvesting canola crops using a feedstorm auger
Wagin grower Scott Angwin discusses the benefits of uses a feedstorm to harvest big canola crops
-
What is the Adapt T seeding system?
Berriwillock grower Anthony Bibby talks about the value of an Adapt T seeding system in challenging soils.
-
How to reduce header blockages in big canola crops
Merredin grower Mick McGinnis discusses the value of a Feedstorm (TM) Adjustable Upper Cross Auger in improving harvest efficiencies, particularly in canola crops with large amounts of biomass.
-
Precision seeding with grower Todd Orrock
The challenges and rewards of using precision seeding equipment. Jo Fulwood talks to South Australian grower Todd Orrock about why he uses a precision seeder and how it benefits his harvesting system.
-
Part 2 - a chat with Bushel Plus founder Marcel Kringe
Bushel Plus founder Marcel Kringe continues the conversation on how to use the drop tray system.
-
Bushel Plus founder Marcel Kringe - how to use your drop tray
Marcel Kringe, the founder of the Bushel Plus drop tray system discusses how the drop tray idea came about and how to use it during harvest.
-
Northampton grower Ben Cripps talks Harvest Weed Seed Control
How to reduce grain losses while incorporating chaff decks into your harvest program. Jo Fulwood talks to Northampton grower Ben Cripps.
-
Peter Newman - measure your harvest losses
Planfarm's Peter Newman discusses the importance of measuring harvest losses
-
Engineering Solutions to harvest losses - Chat 5
Glen Riethmuller discusses the value of measuring harvest losses
-
Engineering Solutions to harvest losses - Chat 4
Glen Riethmuller talks about threshing and cleaning and how to get the most out of your harvester this season
-
Engineering Solutions to harvest losses - Chat 3
Glen Riethmuller discusses the feeding system on your harvester
-
Engineering Solutions to harvest losses - Chat 2
Glen Riethmuller talks about the importance of setting up knife guards correctly to reduce harvest losses
-
Engineering Solutions to harvest losses - Chat 1
Glen Riethmuller talks about adjusting your machine to reduce harvest losses
-
Peter Bach - using a stripper front
Queensland grower Peter Bach discusses the value of using a stripper front on a winter barley crop
-
Adam Smith talks cereal losses
In this second part of the interview Jo Fulwood talks to Beverley grower Adam Smith about cereal losses.
-
Adam Smith talks lupin losses
Jo Fulwood talks with Beverley grower Adam Smith about losses in his lupin crops.
-
Brett Asphar talks harvest losses and harvest weed seed control
Jo Fulwood talks to engineer Brett Asphar about the workings of a harvester and how to minimise grain losses.
-
Thoughts from a machinery dealer about harvest losses
Ben Boekeman discusses harvest losses from the point of view of the machinery dealer
-
How to harvest crops with large amounts of bio-mass
Jo Fulwood talks to Kojonup grower Rob Egerton-Warbuton about ways to reduce stress on your harvester in crops with significant amounts of bio-mass.
-
Harvest losses in high yielding high value crops - Mark McCully
Jo Fulwood talks to New Zealand grower Mark McCully about ways to reduce harvest grain losses in high value, high yielding crops.
We're indexing this podcast's transcripts for the first time — this can take a minute or two. We'll show results as soon as they're ready.
No matches for "" in this podcast's transcripts.
No topics indexed yet for this podcast.
Loading reviews...
Loading similar podcasts...
Frequently Asked Questions
How many episodes does Reducing Harvest Losses have?
Reducing Harvest Losses currently has 28 episodes available on PodParley. New episodes are automatically indexed when they're published to the podcast feed.
What is Reducing Harvest Losses about?
A chat with growers and advisors on reducing grain losses in their harvest programs.
How often does Reducing Harvest Losses release new episodes?
Reducing Harvest Losses has 28 episodes. Check the episode list to see recent publication dates and frequency.
Where can I listen to Reducing Harvest Losses?
You can listen to Reducing Harvest Losses on PodParley by clicking any episode. We provide an embedded audio player for direct listening, and you can also subscribe via your preferred podcast app using the RSS feed.
Who hosts Reducing Harvest Losses?
Reducing Harvest Losses is created and hosted by Jo Fulwood.
URL copied to clipboard!