Wood Talk | Woodworking

On today’s show, we’re talking about the pros and cons of cordless tools, using Blade Cote on a SawStop, workbench setup for a southpaw, and how our design sensibilities have changed over the years.Wood Talk is proudly sponsored by Woodcraft, your trusted source for quality woodworking machines and power tools. Whether you’re just getting started or looking for your next upgrade, they’ll help you find the right tools to power your woodworking.Use code WT2026 for 10% off regularly priced merchandise. Cannot be combined with other offers, exclusions apply.The show is also supported by the generous contributions of our patrons. You can support the show at Patreon.com/woodtalk.This week, we thank:Blakey LakeTommy EvansTom KrushRocky SmithScott MacIntyreAlexander H, SanyoWhat’s on the BenchMarc cut the big bevels on the table legs before heading out on vacation and is prepping the shop so it’s not awful to come back to.Matt is working on a coffee table commission.Shannon made a cheese slicer, because Woodcraft told him to.KickbackMichael Summer shares his experience with Mike Farrington’s sanding disc, especially the benefits of the taper, the clean edge it produces, and the ability to keep two grits loaded.Freddie also writes in about the Mike Farrington double-taper sanding disc and says it’s fantastic for casework, glue lines, sheet goods, cabinet parts, and sneaking up on final dimensions.QuestionsDavie Brown asks whether using Blade Cote on a SawStop blade could cause problems with the brake system or electronics.Rich asks how the guys’ design sensibilities have changed over the years and whether Matt has found a new kind of figure to fancy.Ed Lilla asks how a left-handed woodworker should think about bench workholding and vise placement.Links and ResourcesWoodcraftLocal Woodcraft Events and ClassesFree Demo, Stay Sharp: Saturday, July 11 at 1pm.Free Demo, Dust Collection Basics, Machinery and Accessories: Saturday, July 18 at 1pm.Store Classes and Events: For in-store classes and events, please check your local Woodcraft store page.Contact the ShowSend questions at woodtalkshow.com, find us on Instagram at @woodtalkshow, or send us a voicemail using your phone to [email protected] can find the guys individually on Instagram at @mattcremona, @woodwhisperer, and @renaissancewoodworker.Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about Alex Snodgrass. Like, the entire time. From his early days as a mustachioed little baby to today, as he’s in the home stretch of his Next Cut Tour.We’re recording live at the Woodcraft Vendor Trade Show in Louisville, Kentucky, which means this is the first face-to-face Wood Talk recording in years.Wood Talk is proudly sponsored by Woodcraft, the leading authority in woodworking, making, and creating. They have the tools, supplies, expertise, and hands-on classes to inspire creativity at every level.Use code WT2026 for 10% off regularly priced merchandise. Cannot be combined with other offers, exclusions apply.The show is also supported by the generous contributions of our patrons. You can support the show at Patreon.com/woodtalk.What’s on the BenchThis week, the bench is all Alex.We talk about how the Next Cut Tour is going.We ask why Alex became so closely associated with bandsaws.We discuss whether the world has enough bandsaw reindeer yet.We get into small-shop and startup bandsaw setup advice.Questions for AlexMatt Parker asks how old Alex was when he first grew that glorious mustache.Tom asks how to deal with a 14" Powermatic bandsaw with a riser kit that refuses to track straight.Greg Batt asks whether upgrading a common 14" bandsaw from a 1 HP motor to a 2 HP motor is worth the cost and effort.Joe Lapolito asks how often a hobbyist needs to go through Alex’s full bandsaw setup process once the machine has been dialed in.Martin asks how to clean the blade and machine after cutting wet wood.We also ask why Carter guides over blocks or other bearing guides.And when a bandsaw blade breaks, what’s the first thing to check?Links and ResourcesAlex Snodgrass, The Next Cut TourLocal Woodcraft Events and ClassesMinneapolis: Summer Lumber Deal runs through June 20. Get a $20 gift card with a $100 lumber purchase.Minneapolis: Free Bandsaw Tune Up demo, Saturday, June 20 at 1pm.Boise: 3 Stone Cairn Lamp class.Greenville: Celtic Knot Rolling Pin class.Contact the ShowSend questions at woodtalkshow.com, find us on Instagram at @woodtalkshow, or send us a voicemail using your phone to [email protected] can find the guys individually on Instagram at @mattcremona, @woodwhisperer, and @renaissancewoodworker.Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about the 2026 Woodcraft National Sales Conference & Vendor Trade Show, the best trade show you’ll never go to. We’ll talk about our experience at the show and some of the standout products and companies we saw.Wood Talk is proudly sponsored by Woodcraft, the leading authority in woodworking, making, and creating. They have the tools, supplies, expertise, and hands-on classes to inspire creativity at every level.Use code WT2026 for 10% off regularly priced merchandise. Cannot be combined with other offers, exclusions apply.The show is also supported by the generous contributions of our patrons. You can support the show at Patreon.com/woodtalk.This week, we thank:David DahlCoreyKKickbackRich Harwood follows up on the aluminum WoodRiver straight edges and how he uses them in the shop. He keeps a Starrett steel straight edge as his protected reference tool and uses it to verify that the cheaper straight edges are still within tolerance.Standout Companies and ProductsWe saw a lot of great products and talked to a lot of great companies, so we can’t cover everything. But a few of the standouts include:MicroJigSawStopKreg, including the Edge Joiner and upcoming trim routerOliverIzzy Swan and Swan ToolsOld MastersWoodRiverWalrus OilEasy Wood ToolsCarbon MethodGrit GripJessEmTemple ToolsPowermaticLinks and ResourcesWoodcraftLocal Woodcraft Events and ClassesMinneapolis: Summer Lumber Deal runs through June 20. Get a $20 gift card with a $100 lumber purchase.Minneapolis: Free Bandsaw Tune Up demo, Saturday, June 20 at 1pm.Boise: 3 Stone Cairn Lamp class.Greenville: Celtic Knot Rolling Pin class.Contact the ShowSend questions at woodtalkshow.com, find us on Instagram at @woodtalkshow, or send us a voicemail using your phone to [email protected] can find the guys individually on Instagram at @mattcremona, @woodwhisperer, and @renaissancewoodworker.Thanks to Todd and Margaret. Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about, what are straight edges good for anyway, color changing desks, and edge jointing quandaries. Wood talk is proudly sponsored by Woodcraft! Use code WT2026 for 10% off regularly priced merchandise, can’t be combined with other offers, exclusions applyIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. We’d like to thank: Joe Clauss and Paul O’HareWhat’s on the Bench?Marc: A little more work on the table. Bought the walnut. $1600 in and I haven’t even cut the wood yet.Matt: Breakfast table launch and Epoxy coffee tableShannon: helping a student with dovetailsKICKBACKRyan had a great experience at a Woodcraft swap meet.Larry has a suggestion for a plane that helps with inside corners.QuestionsLisa wants to know if she should buy a straight edge: https://www.woodcraft.com/products/woodriver-stainless-steel-cabinetmarkers-ruleAzeem has three questions related to UV color changing wood, Osmo use, and jointing an edge.Resource: https://thewoodwhisperer.com/videos/aging-wood-with-baking-soda/ Woodcraft HappeningsA few stores, including Spokane, Seattle, and Denver, are hosting either a Summer Clearance Event or a 15% Off Sale over the weekend of June 13th and 14th.In Seattle and Denver, the first 25 customers to spend $25 on clearance items will receive a free Pinnacle marking and measuring tool.There are also some interesting classes coming up around the country.Sacramento has a Thor’s Hammer class, where students shape a wooden hammerhead on the table saw and turn a custom handle on the lathe.St. Louis, Indianapolis, and Nashville have the Drunken Cutting Board class, which uses a bandsaw technique to create that wavy checkerboard pattern.Greenville has a Celtic Knot Rolling Pin class, with both youth and adult sessions.  Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about small shop organization, how to use a push stick with the JessEm guides, why are there always mistakes?! Our show is also sponsored by the generous contributions of people like you! Thank you!If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. We’d like to thankAlmost PerfectionWhat’s on the Bench? Marc: Started MCM table for friend of hisMatt: Finished the breakfast nookShannon: teaching sawing and chiselingKICKBACKJeremy - Has some thoughts on losing a job and relying on the shop.Bryan - Tells us his thought process behind using toothpicks.Paul - I was wondering since Mother’s Day is so close and I’m not ready for it if you could put it off a couple of weeks so I have time to make a picture frame for my wife.Questions!David - I use the Jessem Table Saw guides and noticed Marc uses them also. I find that using a push stick with them isn't easy. The only one I find useful are the long stick type that is included with table saws. Which push stick do you use with the Jessem guides.https://www.kqzyfj.com/click-101642234-13817089?url=https%3A%2F%2Fwww.woodcraft.com%2Fproducts%2Fjessem-rip-stick-for-ts-and-sts-stock-guides%3Fvariant%3D47228246360202&cjsku=196955Brandon - Over the years, I've made many things I've eventually been proud of, but it seems like with every project, no matter how hard I try, no matter how careful I am, no matter how much planning I do, I mess up something smallish that I didn't need to. Examples (feel free to edit): I'll cut dados for shelves, and all but one of them will be nice and tight, but one of them will be a tiny bit oversized and have a visible gap. I'll carefully clamp pieces of a lumber cart together while gluing-and-screwing it, only to realize that one of the shelves is noticeably crooked when I finish. I'll drop a piece off the table saw or workbench, denting a corner that really needed to be crisp and sharp. I'll go to put my name on something with either my iron or my laser, but the placement will be slightly off or the iron will be too hot. Etc. Etc. Etc. Something like this seems to happen on almost every project. Sometimes it's my fault, sometimes it's just a random accident.My question for you guys is this: When/how do you determine when a mistake/accident/major screw-up is significant enough to warrant repair vs. redoing vs. just giving up? Do you have a rule for your own work for when you ignore a mistake and just keep going, or are you all so awesome that a question about mistakes is alien to you? Silas - I love listening to the show I'm a teenager worker.I've only been woodworking for around a year now.I have a small job site table saw and a small lunchbox.Plainer , that's really it , I'm hoping soon to start building a small shed for my workshop.It will only be around sixteen by twelve I Want to know If you guys have any ideas on storage or anything, I'd love to hear like I said, I'm a beginner so I don't know that much. Hosted on Acast. See acast.com/privacy for more information.

It’s show #605 - On today’s show, we’re talking about, woodworking as therapy, is my wood dry enough for a workbench?, dealing with oil stains on plywood.Sponsored by :Use code WT2026 for 10% off - Exclusions apply.What's On the BenchMarc did some finish tests and packed up a bunch of boxes of Preppin' Weapons.Matt installed the breakfast bench.Shannon did a french polish on a ring box.Kickback and StuffVon has now listened to all the show and he tells us what all the people in his life thought about this feat.Joel took our advice and bought a planer and thanks to a deal on Amazon got a DW735 with extension beds and extra knives for less than the list price of the planer.Wayne reponded to our inquiry about sanding at the table saw and he uses the Mike Farrington disc with a 10 degree taper.Listener QuestionsHamilton asks about getting into the shop when going through tough times.Mike has a White Oak log sawn into boards with his new Roubo bench and asks about building it green vs letting the wood dry a bit.Steven is building a painted wall light box that has an oil spill on the plywood. He asks about cleaning it up vs just getting new plywood.Selected Woodcraft EventsStore Specific Events:Mother’s Day Street Market – May 2nd , 9am-2pm – Greenville, SCMeet local Makers & Creatives showcasing their skills and treasures.ClassesAtlanta, GA: Mother’s Week Classes – May 2nd-7thBud Vase, Colorful Coasters, Small Bowl, Sushi SetAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #604 - On today’s show, we’re talking about epoxy as a filler, Carter bandsaw guides, and pegged moretise & tenons.Sponsored by :Use code WT2026 for 10% off - Exclusions apply.What's On the BenchMarc only sells merch now, no more content so get your preppin' weapons and glue rollers at TWWStore.comMatt finished the breakfast table and has moved on to the bench seat.Shannon is struggling with the accuracy OCD that comes with industrial machines.Kickback and StuffLaura is heading up an exhibition of local woodworker's projects at the San Carlos, CA Woodcraft store. For details check out the Bay Area Woodworkers.Darren has had success bleaching turnings and wonders if this would be an option for keeping the natural white oak tone we talked about recently.Harold proposed and she said yes! While sitting in cool rocking chairs.Listener QuestionsDoug has questions about using epoxy to fill voids in Cherry for a table top.Bryan pegged some tenons with toothpicks and those picks have backed out 3/16".Bryan took the Alex Snodgrass class and asks for an unsponsored review on Carter bandsaw guides.Selected Woodcraft EventsStore Specific Events:Tool Swap – Sunday April 26th 8am to 1pm – Sacramento, CAFind great deals on lumber, used tools, and other woodworking items. Orbring yours to swap!ClassesColumbus, OHBuild a concert Ukulele – April 25th & 26th 3pm - 9pmAlex Snodgrass Tour Stops in Aprilhttps://www.woodcraft.com/pages/alex-snodgrass-the-next-cut-tour• Grand Rapids, MI• Sterling Heights, MI• Columbus, OH• Cincinnati, OHAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #603 - On today’s show, we’re talking about our thoughts on avoiding sharpening, pole lathes, and what to do when you have too much footage (aka, a Matt problem)Sponsored by :Use code WT2026 for 10% off - Exclusions apply.What's On the BenchMarc finished the book press.Matt is applying finish to the breakfast table.Shannon taught a bunch of 7th graders how to build stuff.Kickback and StuffAndy responds to our "what is the legends had modern tools and YouTube" by saying that it might get ugly considering Jame Krenov was known to have called Sam Maloof a "router jockey".John asks if any of us compete on our bikes or just ride for fun and leisure.Listener QuestionsTech Support asks if any of us avoid sharpening certain tools.Matt asks how we manage extra footage when filming in order to get through loads of clips more efficiently.Andy wants to make a pole lathe due to his limited space and asks Shannon what he would recommend or do differently from his own lathe builds.Selected Woodcraft EventsApril 10th - 13th Spring Shavings Sale (15% off STOREWIDE)Store Specific Events:Tool Sale – Saturday April 4th 9am to 3pm – Richmond, VARichmond Antique Tool Society will have a great selection of antique andvintage tools for sale. Also, demonstrations and assistance on repairing and sharpening so bring your old hand planes and chisels!▪ https://www.richmondantiquetools.com/ClassesRockville, MDKids Workshop – Candy Dispenser – April 18th 2pm-4pmTeens Workshop - Outdoor Planter - April 19th 10am - 5 pmBoise, IDTusk Tenon Wall Shelf – April 9th 4:30pm - 9pmKansas City, KSSquare Edge Bowl – April 12th 12pm-4pmAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #602 - On today’s show, we’re talking about what would happen if woodworking legends had access to today’s technology, a quick drying wood finish, anti-fatigue mats for the shop, and chisel types and you.Sponsored by :Use code WT2025 for 10% off - Exclusions apply.What's On the BenchMarc made some fancy Walnut garage steps.Matt is working on the breakfast table.Shannon is prepping parts for a middle school class project on Bluebird boxes.We Did PodcastsAll 3 of us cheated on WoodTalk and appeared on another podcast. Well Shannon didn't, he just hosts another one is a constant dirty cheaterMatt was on the Woodturners JourneyMarc was on the Modern Woodworkers PodcastShannon hosts The Lumber Update Podcast always...the cheaterKickback and StuffGreg asks If Maloof, Nakashima, Krenov, Frid, and Carpenter had access to modern tools, like CAD, the Festool Domino, and digital conveniences, do you think their work would have been even better, or just different? And in this digital era, would they be revered legends still, or just another set of woodworkers on YouTube?Listener QuestionsYukiki is leading a class on picture frames and asks about a fast drying finish that will allow her students to complete finishing by the end of the class.Tony's feet hurt and he asks what we put on the floor of our shops in the way of mats.David bought some bench chisels at Woodcraft and asks about the other types of chisels and why he would want and use them.Selected Woodcraft EventsStore Specific Events:March Mania – March 14 & 15 – Parkersburg, WV, Cincinnati, OH, Roanoke, VA: 15% Off Almost Everything and Demos all dayDemosTable Saw Tune-Up - Saturday, March 14th, 1pmKeeping your table saw in top working order makes your project easier and safer. Stop in as we show you how!Joinery Jigs - Saturday, March 21st, 1pmA couple of boards and some nails might work, but they may not be the best solution to keeping your project in one piece. Join us as we review different types of joinery jigs to help you build a strong finished piece.ClassesRockville, MD: Teens Workshop – Bandsaw Box - Sunday, March 15, 10 AM - 5 PMRichmond, VA: Marquetry: Cutting, Assembly, And Veneer Fundamentals - Saturday, March 7, 9 AM - 3:30 PMChattanoga, TN: A variety of Jess Crow Resin classes from March 6th through March 10thAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #601 - On today’s show, we’re talking about sharpening hand saws, making a bowl without a lathe, and woodworking design resourcesSponsored by :Use code WT2025 for 10% off - Exclusions apply.What's On the BenchMarc is cutting really big tenons.Matt is wrapping up his breakfast bench build for the Guild.Shannon wants to buy a pneumatic elevator and bought caning supplies.Kickback and StuffLee from Regal Street Woodworks writes in to explain his end grain jointing process.David shares a tale of changed shorts when jointing end grain turned a cookie into a frisbee.Luke built a weekend project using "wisdom" from all 3 of us...but mostly his newly honed sharpening skills gained from a class at his local Woodcraft store.Listener QuestionsNate asks us to list some design resources after our discussion about how design isn't covered much in woodworking.Dave is trying to make a bowl without a lathe using a hole saw and asks for advice to keep his bowl from flying across the shop.Tyler is tempted by used hand saws and asks whether to sharpen himself or send off to an expert.Selected Woodcraft EventsStore Specific Events:March Mania – March 14 & 15 – Parkersburg, WV, Cincinnati, OH, Roanoke, VA,15% Off Almost Everything and Demos all dayLocal Store Anniversary Celebration – March 7th – Rochester, NYDemos, Food, Giveaways, Special SalesDemosTable Saw Tune-Up - Saturday, March 14th, 1pmKeeping your table saw in top working order makes your project easier and safer. Stop in as we show you how!Joinery Jigs - Saturday, March 21st, 1pmA couple of boards and some nails might work, but they may not be the best solution to keeping your project in one piece. Join us as we review different types of joinery jigs to help you build a strong finished piece.Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #600 - On today’s show, we’re talking about color matching, tigerwood workbench, and wood on a metal lathe.Sponsored by :Use code WT2025 for 10% off - Exclusions apply, valid until Jan 31st 2026What's This Sh&%t[caption id="attachment_49354" align="alignright" width="239"] Screenshot[/caption]We saw this process shared on Powermatic's IG account and question the safety and missed opportunity to educate as a major power tool manufacturer. We would love to hear from the maker about the process he used and how it is working for him.What's On the BenchMarc is making a book press.Matt is starting on his breakfast bench project.Shannon blew up his other knee while doing a sawing demo. He is OLD!Kickback and StuffPaul recommends FreeCAD as a SketchUp alternative that he finds similar to many of the higher powered solutions on the market.Hamilton gravitated to wax finishes due the safety and health aspects as he found so many other finish products had harmful VOC levels.Dick says, "yep that's actually my name", and "yes, its normal sized"Listener QuestionsBob asks about using color and toning finishes as all his experience lies in clear coat finishes.Greg asks about the differences between metal and wood lathes and what will suit his needs.Amy has a bunch of Tigerwood 1x6 laying around and asks about using it for a workbench.Selected Woodcraft EventsStore Events:Don’t miss Alex Snodgrass’ Next Cut Tour:2/20-2/21 - Orlando2/22-2/23 - Clearwater2/24-2/25 - Birmingham2/26-2/27 - AtlantaWoodcraft often has local club meetings in their stores too!Virginia Beach, VA: Tidewater Woodworkers Guild Meeting Monday, February 23Dayton, OH: Miami Valley Wood Carvers Carve-in, Tuesday, February 17Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #599 - On today’s show, we’re talking about finding yourself rudderless in woodworking, when to fire a customer, woodworking on an open-sided deck, woodworking topics that have been discussed too much and too little, winter shop strategies, and safety lessons for a maker spaceListener QuestionsJohn needs to shift his product base as the market has dried up.Alex has a custom job that is going south and he is trying to figure out whether to bail or continue on.Hamilton is working in a covered porch space but with open sides and asks what he should consider with regard to tool maintenance as well as safeguarding his projects.Tomasso asks what woodworking topic has been talked to death and perhaps which ones haven't been talked about enough.Ed asks about winter strategies in the shop for keeping his tools in working order.William manages a maker space and asks about some safety training protocols.Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #598 - On today’s show, we’re talking about safety lessons for a maker space, strategizing lumber for a workbench, helical heads in benchtop planers, cypress finishing.Sponsored by :Use code WT2025 for 10% off - Exclusions apply, valid until Jan 31st 2026What's On the BenchMarc is bending and laminating to make the fanciest towel rack, and now has his new True Grip Clamp Pads for sale! Matt is cleaning and sterilizing.Shannon took his architect training course on the road to California and admired trees.Kickback and StuffPaul teaches Fusion 360 at his local Woodcraft and shares what he likes about it over SketchUp.Joel comments on how Europeans make better plywood with a history lesson on wooden fighter planes in WWII.Listener QuestionsJoel wants a planer and wonders if a spiral head is worth it in a benchtop model.Von milled a Red Oak log into boards and is now about to build his workbench but asks if there is any particular grain orientation he should consider for the parts as he builds it.Jim is building Adirondack chairs from Cypress. He wants them to grey naturally and wonders if he should put any finish on them at all.Selected Woodcraft EventsIn-Store Classes are awesome. You should take some! Check your local store to see what they have going on.Here’s just a sampling of what’s going on:Store Events:Supreme Bowl Contests – Woburn, MA; Walpole, MA; Richmond, VA; Norfolk, VA; Portsmouth, NH (Separate contests at each store)Submit your bowl to be voted on in a variety of categories. Voting ends February 8th (submission dates and categories vary somewhat by location)Classes:Kansas City, KS – Learn Resin Casting – Saturday, January 31st, 9 to 4January 30th – DATE NIGHT: WINE & CHEESE, Turn a bottle stopper and cheese planeAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #597 - On today’s show, we’re talking about making thin wood without a bandsaw, fixing sticky drawers, Tormek sharpening machine comparisons, and building a rocking chair.What's On the BenchMarc can't move so he is scratching the itch by rearranging the shop.Matt just keeps turning...homemade 40 foot swing lathe in the future?Shannon broke his band clamp while making picture frames, Marc teases with an out of stock band clampWoodTalk Bike CornerShannon rants about e-bike which are great for commuting and getting people into riding, but kids making fun of kids who have to pedal is outrageous. Plus, get some exercise you lazy kids!! shakes fistKickback and StuffHans let us know that the black MDF we talked about on a previous show is manufactured under the brand Valchromat and they make a variety of colors.Ryan compliments our restraint during Matt's hollow chisel mortiser experience.Darren shares a bushcraft video where they use wooden holdfasts.Listener QuestionsDianne has some sticky drawers in a chest and asks for advice to address it.Seth is a building a Shaker cabinet that calls for tinner stock and asks whether to plane or resaw the material to thickness.Harold wants to build a rocking chair to accompany his proposal attempt to his girlfriend and asks about where to start with building it.Mark is look at the Tormek for sharpening both shop tools and kitchen knives and wonders about the differences between the models. Marc suggests a specific kitchen knife sharpener which is much easier to use and stays in the kitchen.Selected Woodcraft EventsIn-Store Classes are a great way to make a wonderful holiday gift. Check your local store to see what they have going on.Here’s just a sampling of what’s going on:Store Events:Cabin Fever Event - Jan 24th at Cincinatti, OH; Roanoke, VA; Parkersburg, WVLots of sales. Demos throughout the day. Chance to win prizes.16th Annual Woodworking Expo – January 24th at Phoenix, AZVendor demos, Manufacturer Representatives, storewide power tool specials.Supreme Bowl Contests – Woburn, MA; Walpole, MA; Richmond, VA; Norfolk, VA; Portsmouth, NH (Separate contests at each store) Submit your bowl to be voted on in a variety of categories. Voting ends February 8th (submission dates and categories vary somewhat by location)Classes:January 23rd – DATE NIGHT: PIZZA & BEER; Turn a pizza cutter and bottle openerJanuary 30th – DATE NIGHT: WINE & CHEESE; Turn a bottle stopper and cheese plane.Orlando, FL – Lathe Tool Sharpening Made Easy – Saturday, January 17th, 10 to 3.Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #596 - On today’s show, we’re recapping some of our favorite things of the year and answering your questions.End of Year WrapIts our last show of the year so we spend some time talking about our challenges, new products, and specifically stuff we got from our sponsor, Woodcraft.Kickback and StuffShoutout to Hamilton Ward on his birthday. His wife wrote in and asked us to recognize him.Ryan's comic display worked out great but he asks about when to prefinish and when to skip it.Von likes the bicycle talk, in fact when he listened to our back log he got Peloton bike ads.Listener QuestionsMatt is milling parts for his Guild project tableShannon used a power tool to cut up a live edge slab for an architect.Marc bought a new bike then lots of NYC pizza.Woodcraft Store EventsRockville, MD - 10 Ways to Cut Dovetails with Bob Van Dyke -Saturday, November 29 and November 30, 10 AM - 5 PM Walpole, MA - Volunteers needed Wooden Toy Truck Build for "Toys-for-Tots" Saturday, December 6, 2025, 9:30 AM - 3 PMAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Sponsored by :If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.It’s show #595 - On today’s show, we’re talking about what to do when your workbench sucks, Is wood acclimation BS, and running a lathe backwards.Woodcraft GiveawayCongratulations to Matt Croyle who won the tap room cutting board kit.We also heard from Joe, last months lathe tool giveaway and he does actually have a lathe and has already put his new tools to use.Black Friday SalesWood Whisperer Guild Save 40% with code BlackFriday40BackSide Sandpaper, Wood Whisperer Specials are 20% off!Hand Tool School 50% with code HTS50for15; black friday but 15 yr anniversary.Matt Cremona - Free shipping on Chair Kits and some discount on everything elseWhat's on the BenchMatt is milling parts for his Guild project tableShannon used a power tool to cut up a live edge slab for an architect.Marc bought a new bike then lots of NYC pizza.Kickback   Listener QuestionsVon asks how much wood actually acclimates over the course of a few weeks and if that is a myth.James asks what to do after he built his workbench and then feel inadequate about it after watching hundreds of videos.Joe asks why he would run his lathe backwards because his lathe motor runs both ways.Woodcraft Store EventsNovember 7th and 8th Kreg Demos at every store nationwide.November 8 & 9th- Turn for the Troops events nationwide.Local Store events: too many to list here this time...wow...Goooo Woodcraft! Check your local store for detailsAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Sponsored by :If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.It’s show #594 - On today’s show, we’re talking about finish for a commercial shelf, removable furniture tops and ripply cuts.Woodcraft GiveawayFor November Woodcraft is back with another giveaway. This time they are giving away a Tap Room Cutting Board Kit and you can register to win by filling out the form on our website here. We will draw a winner and announce at the end of November.What's on the BenchMarc finally finished the built-in desk for Nicole.Shannon rants about the quitting perception foisted on him by the market normal.Matt started work on the breakfast tableKickbackTom loves his shaper so much he is teaching a class about it at the Alpine Technical Workshops. If you want to learn more about shapers then this is the place.Von likes Shannon's philosophy on getting things done and it reminds him of the book "Getting Things Done" by David AllenMarc and Matt think how SketchUp handles versioning and authentication is stupid and they complain about it.Listener QuestionsRyan needs a finish suggestion for a comic book shelf he is building for a local store.Dana is building a TV cabinet that is big and heavy and asks about making the top removable yet structural.Rick is sawing Walnut logs with his woodworking guild and they are getting ripply cuts despite changing the blade and doing typical bandsaw triage.Woodcraft Store EventsNovember 7th and 8th Kreg Demos at every store nationwide.November 8 & 9th- Turn for the Troops events nationwide.Local Store events: too many to list here this time...wow...Goooo Woodcraft! Check your local store for detailsAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Grain filling turnings, crosscut sled vs mitersaw and keeping on track with a large project. Hosted on Acast. See acast.com/privacy for more information.

If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.It’s show #591 - On today’s show, we’re talking about first aid kits, why no shapers?, when is enough, enough?, our favorite distractions when we have a creative block, and an alternative for table saw blade height adjustment.Woodcraft GiveawayWoodcraft is back with another giveaway for the month of October. This time they are giving away a 5 piece turning tool set and you can register to win by filling out the form on our website here. We will draw a winner and announce at the end of October.What's on the BenchMarc wasted time flattening a block plane sole.Shannon has started holiday turning.Matt has started designing a trestle table, specifically the base.Listener QuestionsDave asks about our first aid kits in our shops.Marc's first aid kitQuality TweezersTom has a shaper in his shop and loves it and can't figure out why no one has one or talks about them.Erica asks the questions every woodworker asks at some point: how flat is flat enough, how smooth is smooth enough, etc.Tom asks what we do when we hit a wall with a project and are ready to throw it out.Eduardo wonders if an answer to our table saw height adjustment issue from a previous episode could be solved by a scale placed on the fence. This suggestion fires up Marc and Matt and they decide to launch an entirely new form of table saw that will cost loads more and be less safe.Woodcraft Store EventsAll stores:October 17 and 18th JessEm Demos at every store nationwide.October 11th and 12th- Anniversary sales and open houses at the following stores: Baltimore, Virginia Beach, Pittsburgh, Birmingham, Lexington, Clearwater, and RichmondOctober 12th - Virginia Beach: Make a 3D Stairstep Cutting Board with Alex SnodgrassAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Sponsored by Woodcraft! https://www.woodcraft.com/startAnd by the generous contributions of our patrons: https://www.patreon.com/woodtalkToday we’re talking about Don't miss your chance to win a Wood River Mini Turning Tool Set: https://woodtalkshow.com/giveaway/What's on the Bench- Marc started the install of Nicole's builtin desk.- Shannon blew off the world and went bikepacking.- Matt is cleaning up to do more sawmilling.KickbackLast episode we had a question from Simon about loss of grip strength and how he should deal with it. We got some good suggestions:- Brian suggests "Hand-i-craft" also has nerve damage in their hand, leading to them coming up with some interesting approaches to woodworking: https://www.youtube.com/@hand-i-craft- Tommaso suggests: check out Essential Craftsman channel, he has a friend he works with who is an exceptional woodwork. The guy suffered a stroke and lost control of his dominant side, and theres a few videos on how he's dealing with it.- Marc suggests @delbasidtimbers on IG - https://www.instagram.com/delbasidtimbers/- Butch is impressed by how hard we work when we are actually getting paid to do the show.Listener Questions- Tom is making small, 3" ish circles with a router and template and seeks advice on a safe and clean way to do it. Marc suggests a sanding jig instead of a router and referenced this video from Bob Lang: https://youtu.be/m6FfXUAPx1w?si=XuydD01MByNN83DH- John is building a workbench and asks about getting quartersawn material vs flatsawn material.- Brandon is looking for a resource to help him identify trees so he can buy logs and know what he is getting. Hosted on Acast. See acast.com/privacy for more information.

Sponsored by :If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.It’s show #590 - On today’s show, we’re talking about… Tools we wish existed, shopping for a grinder, Why don’t you buy another super expensive, super specific tool??Giveaway Winner!Nathaniel Snell is the winner of the WoodRiver small shoulder plane. We had over 500 entrants and thank you for everyone who entered. The great new is Woodcraft likes the idea and there will be more of this to come.What's on the BenchMarc is make cat collar tags with a laser and avoiding drywall.Shannon used his new WoodRiver shoulder plane and admits it might has a use in his shop despite years of hating on shoulder planes.Matt finishing clearing out after sawmilling just in time for more sawmilling.KickbackJim visited Woodcraft while listening to the show and spent $1000 on stuff he doesn't need. Goooo Woodcraft!Dining Table DiscussionWe talk about the double edged sword of specialty tools: gimmick or useful?Listener QuestionsSimon had a tough medical procedure and is looking for advice on how to move forward with his woodworking with lack of grip strength.Tommaso asks what tool we want that doesn't currently exist on the market.John is shopping for a grinder as he is tired of resetting the bevel using stones and sandpaper.Gary asks Matt why he doesn't have a chipper for all the offcuts and waste from his saw mill.Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

 Sponsored by Woodcraft! On today’s show, we’re talking about using beeswax in finish, cleaning up an old saw, and can I run these through planer??Hey Hey Hey! Shoulder Plane Giveaway!Marc has an extra WoodRiver small Shoulder Plane and he is going to give it away to one lucky person. Fill out the form here and take your chance to wind a shiny, steampunk looking shoulder plane. Hurry, because we will select the winner on the next show.What's on the BenchMarc is still working on the builtin desk for Nicole.Shannon did some dock repairs up in Maine and de-rusted his tools.Matt stacked and stickered wood.KickbackVon wants Matt to talk more about his saw milling decisions too.Michael likes Matt's radio style reading of Woodcraft store events.Cliff does all his project modeling on his iPad with his Apple Pencil and Shapr3D software.Listener QuestionsDavid got some beeswax and wonders about mixing his own finishes.Brandon has some old hand saws from his grandfather and great grandfather and he wants to clean them up to display them.Sandflex Blocks and Wizards Metal PolishBen has some old Oak flooring and a butcher block top that he has concerns about running through his planer.Woodcraft Store EventsAll September - Parkersburg, Cincinnati and Roanoke Woodcraft stores are having a Box Making Bonanza. Submit a box for a chance to win a Woodcraft gift card!Woodcraft of Hawaii is having Vendor Sale Weeks all month in September, including brands like Makita, DeWalt, Milwaukee, Stabila, and Bosch just to name a few.Sept. 5th - 7th, Omaha Woodcraft is having their Whale of a Sale - 15% off RIKON tools & accessories, 10% off select tools & accessories, 20% off wood, 15% off nearly everything else. Free demos & door prizes on Saturday, September 6.September 6 at Seattle Woodcraft, they’re having their 7th annual Tool Swap.September 6, Woodcraft of Indianapolis will host Family Day. Projects for kids, 15% off storewide, giveaways, food and special guests from Central Indiana Woodworkers, Fishers Makers Playground, Circle City Carvers, Festool & WoodMizer.September 13, 10-2 Woodcraft of Grand Rapids will host a Tool Swap & ShopOctober 4-5: Pacific Northwest Woodworking & Maker Expo Presented by Woodcraft held at Expo Idaho in Boise. Woodworking vendors, makers selling handmade goods, educational seminars and a tool sale. Tickets and details available now at https://www.woodmakerexpo.com/ Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about sealing templates, magnets in our projects, and to flatten or penetrate first? Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about… SERIOUS WOODWORKING DRAMA, our recommendation for a zero VOC finish, carpenters vs woodworkers, and grain vs figure. Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about… the role of AI in our work, sanding through the grits, and vertical grain drawer fronts. Hosted on Acast. See acast.com/privacy for more information.

Sponsored by Woodcraft!How to lower your chances of back injury in the shop, cutting the end of a workbench, designing with secondary woods, super-duper ultra mega laminated benchtop Hosted on Acast. See acast.com/privacy for more information.

It’s show # - On today’s show, we’re talking about… are you missing something by NOT engaging in CNC and digital design, cutting a burl, blame the sealer or blame the woodSponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.What's on the BenchMarc is reclaiming a jungle gym and building raised garden beds.Shannon is building lyres out of cheap Michaels picture frames for a course for 5th graders.Matt is trying to figure out where to plant his own garden.Listener QuestionsGreg is a hybrid woodworker and wonders what he is missing by NOT embracing the world of CNC and more automated forms of woodworking.Brian asks for the best way to cut a burl from a tree.Martin has some green Cherry bowl blanks and despite sealing them they are checking a lot which has him rushing to turn them. Is it the wood or did he do something wrong with cutting and sealing?Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Answering emails from Patrons! Hosted on Acast. See acast.com/privacy for more information.

It’s show #582 - On today’s show, we’re talking about tear out on cherry, stock prep time savings: planer or jointer, and there’s bugs in my nut wood.Sponsored by WoodcraftWoodcraft is looking out for you guys. Do you know how?They want to make sure you know what to expect when it comes to this whole tariff debacle. Because tariffs are obviously going to impact a LOT of the major power tool purchases woodworkers make in the foreseeable future.So while details and dates are somewhat fluid, here are the most current timelines:JPW (that’s Jet and Powermatic): June 15thLaguna - July 1stSawstop - Mid-JulyWoodcraft is trying to be as transparent as possible and they’ll be sending out emails about this in the future. Bottom line is, prices are going up. Woodcraft didn’t set the prices so don’t shoot the messenger.So if you’re in the market and were thinking about making a major purchase, it probably behooves you to do it now.In fact, here’s one better. When you go to woodcraft.com, you’ll get a little popup offering you a discount for signing up for their newsletter. Do it, because you can save 10% off your first order. Exclusions apply so you’ll want to read that fine text but hey, a discount’s a discount.Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.What's on the BenchMarc has found his epoxy redemption and completed the mantel project.Shannon has started demo on his new deck.Matt is fixing stuff...then breaking it again.KickbackSteve Goldberg has Japan feedback for Steve Goodloe. He recommends the Takenaka Carpentry Museum in Kobe, the Ritsurin Garden in Takamatsu. Check out the Nakashima exhibit upstairs. Finally seek out the local craft shops and talk to the woodworkers. He found a shop called Inoue Hamono in Tokyo. The family/owners were friendly and helpful and I brought a dovetail chisel back to America.Listener QuestionsDrew was making a breadboard tenon and got some tearing along the baseline with his brand new straight router bit and asks why.Misha has short time in his shop like most of us and is looking to save time on stock prep but not wanting to buy both a jointer and a planer. Does he buy a planer or jointer? Can he get by with a planer alone? He does point out a pretty slick planer sled jig on Instagram.Steve has inherited some Butternut that was air dried and has some signs of bugs. What should he do with the material?Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #581 - On today’s show, we’re talking about…making stains suck less, cutting angled tenons, and what to do with all that ash? PLUS we have a new sponsor of the show!Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.What's on the BenchMarc is building with epoxy!Shannon is finishing with a ketchup packet.Matt is finishing up kitchen stuff and still sawing stuff too.KickbackJoe reaches back out to us to say his hand plane issues were because of the "friggin' frog" in the wrong place.Andy wants to tell us about a new modeling software at Layout.computer that was designed for chair makers but has now added a casework component too.Brandon offers the advice of putting an air filter outboard of the intake on his dehumidifier and what a difference it has made.Andrew calls in to share his surgeon father's advice about being cut with a dull tool or sharp tool, spoiler alert, "flappy bits" is a technical term.New Sponsor - WoodcraftWe reminisce about our early Woodcraft store experiences and the classes we have taken there. We are thrilled to be a part of that journey for other woodworkers and look forward to working with Woodcraft.Listener QuestionsDavid wants to know why stains suck so much and we try to tell him they don't...and fail. Marc suggests making a blotch control to help with stain absorption.Steve looks for advice on making angled tenons for a chair using power tools. Angled mortise or angled tenon?Paul has several Ash logs that were killed by the Ash Borer and asks for advice on what to do with them.Steve is taking a trip to Japan and wants to know some woodworking related stuff to see. We don't know but want to know so are asking the audience for advice. Write/call in and tell us your suggestions.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Hand tool frustration, feeling guilty about shop time, chunks of crotch, shop dehumidification, and glamor shots Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about first aid in the shop, free modeling software, wood in movies, which handsaw to buy, keeping those tootsies comfortable in the shop, finding the center of an edge, and sanding safely.Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.What's on the BenchMarc has woodworkers invade his shop.Shannon is building a coat rack disregarding wood movement.Matt moved into his kitchen and is now a professional chef.KickbackZack listened to all the shows and submits his comments through history all at once.Bram comments that made jinxed himself when he said he would never want to have to cut enough dovetails to fill and entire kitchen.Tom sums up our host's personalities perfectly.Listener QuestionsAntonio's feet hurt and he wants advice for his shop.Alex has a new ROS and is making a lot of dust. What is the best safety gear for sanding dust?Kevin wants to know when Shannon will make a Guild project.Josh asks how to best find the center of an edge.Jonathan cut his finger badly and it has him thinking about his first aid and emergency response in his shop.Eric can't use the free version of SketchUp any longer and asks about free 3D modeling software options.Von Welch was listening to the Flop House podcast and he wanted to know what movies we think of when it comes to wood and/or woodworking in movies.Antonio wants an opinion on dovetail saws and a saw for resawing.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about things to think about when woodworking in the desert, non-digital information sources, cutting large cookies without the big tools, and buying your first dust collectorSponsored by You: https://patreon.com/woodtalkWhat's on the Bench+Marc is making plywood workbenches and hating his life+Shannon is crafting a craft beer Christmas+Matt is using drawer slides and wishes he wasn'tKickbackSo many of you wrote in to say how much the burnout episode spoke to you. From those dealing with the loss of a parent to those struggling to find time for woodworking. Burnout is a very real issue and we are so thankful for all of you who commented and took the time to write to us about your own personal experiences with it.Listener Questions+Mike lives in the AZ desert and wonders how his dry climate changes how he woodworks and what he needs to consider when he builds projects that end up in much more humid climates.+Lucas inherited a shop that is already plumbed for dust collection and asks about buying his first dust collector.+Dane has a big hunk of burl that he resawed to make a chair seat. It took him a long time and left him exhausted and asks how he could improve other than buying a different tool.+Jeremy spends enough time in front of a computer and asks how we feel about woodworking magazines as a way to get more woodworking knowledge.Ask Us a Question: https://woodtalkshow.com/questions/Finally you can find us individually at @mattcremona, @woodwhisperer, and @renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

We’re talking about… BURNOUT!!!, a tight riving knife, making big under-bevels, buying bulk lumber, and uneven table legs. Hosted on Acast. See acast.com/privacy for more information.

It’s show #576! On today’s show, we’re talking about a big WIA Recap, using a friend’s shop, resawing on the table saw, and when to use certain woodsSponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.What's on the BenchMarc is making a coffee bar and fiddling with a full size vacuum press set up.Shannon is trying to design his own interpretation of a Conoid chair...and failing.Matt is shortening his life huffing paint fumes.Woodworking in America RecapRyan, Kyler, and Paul wrote in with glowing reviews of Woodworking in America. For some it was the first ever woodworking conference while others had previous experience with the show. In all it was a positive vibe with a lot more focus on the presenters and less on the marketplace. The general feel is that we hope the show continues and can keep the smaller, education focused feel.Listener QuestionsKarter has a neighbor with great tools that he uses from time to time and asks how he can suggest that neighbor buy more tools so he can have his cast offs.Mark is resawing on his table saw with a small 8 1/4" blade and asks how he can get better results.David was recently given a bunch of wood and asks for resources to learn about which species are best for what application.Shannon Suggests:Lumber Update episode 68The Wood Databaseand this video of his lecture from WIA 2011Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about…modifying a table, finish for a whiskey tumbler, salvaging parts from an old table saw, and woodworking with children.Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.KickbackThomas ran off the road when the title bell rang in his headphones and he thought it was a bicycle right behind him. Our message: don't wear headphones when riding your bicycle.Listener QuestionsLars wants to refinish a live edge desk and needs help matching the existing finish.Pennington wants to make a whisky tumbler from his friend's downed Red Oak tree.Peter has an unusable Rigid tablesaw and wonders if he can salvage and repurpose the parts.Jered has a 4 year old daughter and wants to work with her in the shop and needs advice.Michael wonders why shop is no longer in our schools and how to get a job in woodworking.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

We’re talking about building a table for a 3-season room, how can 6” sanders possibly be better and our go-to woodworking finishes. Hosted on Acast. See acast.com/privacy for more information.