You Wear It... Well

Humotech CEO Josh Caputo, PhD shares the early years of his company and the challenges faced.https://humotech.com/

Till Steinforth and Dr. Kylin Flothe look at the future of 3 D printed shoes.https://uofnebraska-my.sharepoint.com/personal/56737410_nebraska_edu/_layouts/15/stream.aspx?id=%2Fpersonal%2F56737410%5Fnebraska%5Fedu%2FDocuments%2FLIGHTNING%2001%20%28TMFD%20%2D%20896%29%2FRIPPLE%20RUNNER%5Ffinal%20submission%2FRipple%20Runner%20Video%2Emov&referrer=StreamWebApp%2EWeb&referrerScenario=AddressBarCopied%2Eview%2E3d705004%2Dce64%2D43c8%2D8f93%2D1350cdca33e7

Till Steinforth and Dr. Kylin Flothe share the challenges in developing the Ripple Runner.https://uofnebraska-my.sharepoint.com/personal/56737410_nebraska_edu/_layouts/15/stream.aspx?id=%2Fpersonal%2F56737410%5Fnebraska%5Fedu%2FDocuments%2FLIGHTNING%2001%20%28TMFD%20%2D%20896%29%2FRIPPLE%20RUNNER%5Ffinal%20submission%2FRipple%20Runner%20Video%2Emov&referrer=StreamWebApp%2EWeb&referrerScenario=AddressBarCopied%2Eview%2E3d705004%2Dce64%2D43c8%2D8f93%2D1350cdca33e7

Till Steinforth and Dr. Kylin Flothe discuss the evolution of Ripple Runner.https://uofnebraska-my.sharepoint.com/personal/56737410_nebraska_edu/_layouts/15/stream.aspx?id=%2Fpersonal%2F56737410%5Fnebraska%5Fedu%2FDocuments%2FLIGHTNING%2001%20%28TMFD%20%2D%20896%29%2FRIPPLE%20RUNNER%5Ffinal%20submission%2FRipple%20Runner%20Video%2Emov&referrer=StreamWebApp%2EWeb&referrerScenario=AddressBarCopied%2Eview%2E3d705004%2Dce64%2D43c8%2D8f93%2D1350cdca33e7

Till Steinforth and Dr. Kylin Flothe share the beginnings of the Ripple Runner.https://uofnebraska-my.sharepoint.com/personal/56737410_nebraska_edu/_layouts/15/stream.aspx?id=%2Fpersonal%2F56737410%5Fnebraska%5Fedu%2FDocuments%2FLIGHTNING%2001%20%28TMFD%20%2D%20896%29%2FRIPPLE%20RUNNER%5Ffinal%20submission%2FRipple%20Runner%20Video%2Emov&referrer=StreamWebApp%2EWeb&referrerScenario=AddressBarCopied%2Eview%2E3d705004%2Dce64%2D43c8%2D8f93%2D1350cdca33e7

Ignacio García, CEO and founder of Recreus, at the future of 3D printing with his flexible fiber.https://recreus.com/en-en

Ignacio García, CEO and founder of Recreus, tells of some of the challenges of the mission to bring flexibility to 3D printing.https://recreus.com/en-en

Ignacio García, CEO and founder of Recreus, discusses the insights on the road to flexibility in 3D printing.https://recreus.com/en-en

Ignacio García, CEO and founder of Recreus, shares the beginning of the mission to bring flexibility to 3D printing.https://recreus.com/en-en

Research in skin substitute with 3D printing leads to advances in studying skin cancers and other skin problems

Professor Ahmed Elwali shares his views on the future of his sensor microphone.https://www.marian.edu/directory/ahmed-elwali-ph.d

Professor Ahmed Elwali shares details on how he uses the data captured by the sensor microphone.https://www.marian.edu/directory/ahmed-elwali-ph.d

Professor Ahmed Elwali discusses the research phase of his sensor microphone.https://www.marian.edu/directory/ahmed-elwali-ph.d

Research on 3D printing of substitute skin gives hope to those with skin loss.

Professor Ahmed Elwali discusses the beginning of his work on the sensor microphone.https://www.marian.edu/directory/ahmed-elwali-ph.d

Ozgur Ege Aydogan, Fulbright PhD Scholar , discusses the functionality of Brain Computer Interface.https://www.ozguregeaydogan.com/

Ozgur Ege Aydogan, Fulbright PhD Scholar , goes into detail on what electronic systems he uses for Brain Computer Interface.https://www.ozguregeaydogan.com/

Ozgur Ege Aydogan, Fulbright PhD Scholar , discusses just what is is Brain Computer Interface is.https://www.ozguregeaydogan.com/

Ozgur Ege Aydogan, Fulbright PhD Scholar , shares the beginning of his journey with Brain Computer Interface.https://www.ozguregeaydogan.com/

Maria Reynoso Gonzalez describes just what she does in her group's work on the sensor for recognizing diabetes biomarkers and shares the future of the micro needling technology..

Maria Reynoso Gonzalez discusses the challenges her team has faced with developing the sensor to detect biomarkers.

Maria Reynoso Gonzalez describes her work in conjunction with a sensor to help detect biomarkers for diabetes.

Maria Reynoso Gonzalez, a PhD student at UC San Diego, discusses her work with micro needling.

Fingermaus allows for computer use without using a mouse in a flat surface.

3D printing layers for dry batteries is a reality!

Researchers at Pennsylvania State University have developed and tested a prototype glucose sensor that is noninvasive.

Researchers at UC San Diego Health have successfully implanted a cervical disc implant made from 3D printed titanium and customized for the patient with the help of AI.

Researchers have found a sensor that can monitor scarring on the ends of a cardiac stent, wirelessly.

3D bioprinting of human menisci in the International Space Station is now a reality and not sci fi anymore.

Scientists are using 3D printing to patch and then adding heart cells to regrow the heart tissue.

The world's first clinical trial of 3D printed chondral tissue with stem cells promises a minimally invasive and long term solution to knee joint cartilage deterioration.

Researchers at several universities use 3D printing to simulate neural tissue for further research and possible neurological disease treatment.

Researchers at USC have developed a sensor to check the level of lithium in sweat, helping to regulate bipolar patients drug dosing.

Subhasis Banerji, PhD shares the future development of Synphne.http://www.synphne.com/https://www.youtube.com/watch?v=qKp3J3Y18RI&t=7shttps://www.linkedin.com/posts/synphne_synphne-announces-the-launch-of-its-next-gen-activity-7303090240569671681-MmpE/

Subhasis Banerji, PhD discusses the development of Synphne as it is now.http://www.synphne.com/https://www.youtube.com/watch?v=qKp3J3Y18RI&t=7shttps://www.linkedin.com/posts/synphne_synphne-announces-the-launch-of-its-next-gen-activity-7303090240569671681-MmpE/

Subhasis Banerji, PhD describes the journey to a working concept of Synphne.http://www.synphne.com/https://www.youtube.com/watch?v=qKp3J3Y18RI&t=7shttps://www.linkedin.com/posts/synphne_synphne-announces-the-launch-of-its-next-gen-activity-7303090240569671681-MmpE/

Subhasis Banerji, PhD reveals the science behind Synphne.http://www.synphne.com/https://www.youtube.com/watch?v=qKp3J3Y18RI&t=7shttps://www.linkedin.com/posts/synphne_synphne-announces-the-launch-of-its-next-gen-activity-7303090240569671681-MmpE/

Dr. Sriramana Sankar discusses the future of the hybrid robotic hand .http://www.linkedin.com/in/sriramana-sankar

Dr. Sriramana Sankar reveals the intricacies of the hybrid robotic hand being developed at Johns Hopkins.http://www.linkedin.com/in/sriramana-sankar

Dr. Sriramana Sankar discusses the uniqueness of this robotic hand. http://www.linkedin.com/in/sriramana-sankar

Dr. Sriramana Sankar shares the nascent days of the hybrid robotic hand being developed at Johns Hopkins.http://www.linkedin.com/in/sriramana-sankar

Dr. Lee describes in detail his current technology.Dr. Yoon Jae Lee, a recent Georgia Tech Ph.D. graduate and current Research Fellow at the Icahn School of Medicine at Mount Sinai, develops AI-driven wearable computing systems to unlock full-body motion sensing and advance human-centered computing. ⁠https://www.linkedin.com/in/yoonlee-lab/

Dr. Lee discusses working through his current technology.Dr. Yoon Jae Lee, a recent Georgia Tech Ph.D. graduate and current Research Fellow at the Icahn School of Medicine at Mount Sinai, develops AI-driven wearable computing systems to unlock full-body motion sensing and advance human-centered computing. ⁠https://www.linkedin.com/in/yoonlee-lab/

Dr. Lee shares his insights on the nascence of his current technology.Dr. Yoon Jae Lee, a recent Georgia Tech Ph.D. graduate and current Research Fellow at the Icahn School of Medicine at Mount Sinai, develops AI-driven wearable computing systems to unlock full-body motion sensing and advance human-centered computing. https://www.linkedin.com/in/yoonlee-lab/

Founder & CEO of Syntilay, Ben Weiss looks at the future of his company and AI in the shoe market.https://www.syntilay.com/

Founder & CEO of Syntilay, Ben Weiss discusses how AI paired with 3D printing makes their shoes unique.https://www.syntilay.com/

Founder & CEO of Syntilay, Ben Weiss shares the beginnings of his company and how 3D printing shaped it's future.https://www.syntilay.com/

Mattia Ugliano, Co-Founder of I am Hero, reveals just how much the kid's love being a hero and how good it is for them to be one/ ⁠https://www.iamhero.eu/#⁠ ⁠https://www.linkedin.com/in/mattia-ugliano-a170301a6/

Mattia Ugliano, Co-Founder of I am Hero, describes how the team worked the idea into VR. ⁠https://www.iamhero.eu/#⁠ ⁠https://www.linkedin.com/in/mattia-ugliano-a170301a6/

Mattia Ugliano, Co-Founder of I am Hero, shares details on the early days of the company and how he first came upon VR for his brainchild. https://www.iamhero.eu/# https://www.linkedin.com/in/mattia-ugliano-a170301a6/