Deep Dive w/Scott: ESP32-S2 polish

I’m sponsored by Adafruit to work on CircuitPython. Support them, and by extension me, by purchasing hardware from https://adafruit.com Chat with me and lot of others on the Adafruit Discord at https://adafru.it/discord. Deep Dive happens every week. Normally Fridays at 2pm Pacific but occasionally shifted to Thursday at 2pm. Typically goes for two hours or more. Questions are welcome. Next week’s stream will be on Friday. The US changes time this weekend so double check next week’s time again if you are outside the US. https://everytimezone.com/?t=5fa49200,4ec 0:00 Getting going, saying hellos and housekeeping 12:57 Plan 15:00 Is there anything like displayio.release_displays() that allows us to release only a single display install of all of them? 17:30 RaspberryPi bare metal thoughts 32:43 Grayscale support is checked in. Will be in 6.1.x 42:24 6.0 update 50:58 CI for electronics 59:08 Update `sleepio` status 1:17:54 `recv` debugging and PR creation 1:29:55 UF2 1:37:19 back to receive 1:52:56 NTP and adding UDP support Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------