ELECTRIFY™ | Electrician Podcast

In this episode of Master The NEC Podcast, we continue our practical breakdown of important 2023 NEC and 2026 NEC electrical code topics that every electrician, electrical inspector, plans examiner, contractor, engineer, and electrical code professional should understand. This episode focuses on real-world National Electrical Code questions, common installation mistakes, and key changes in the 2026 NEC that impact residential, commercial, and limited-energy electrical systems.We discuss important NEC topics including transformer secondary conductors, dwelling service disconnects, emergency disconnect requirements, limited-energy systems, communications systems, readily accessible equipment, GFCI protection, surge protection, and working space around electrical equipment.Topics covered in this episode include:Transformer Secondary Conductors and the NEC Next-Size Rule2026 NEC Service Disconnect and Emergency Disconnect Changes for One- and Two-Family DwellingsChapter 8 Communications Systems and 2026 NEC Limited-Energy ReorganizationAccessible vs Readily Accessible vs Within Sight in the NECGFCI Protection for Dwelling Garages and Accessory BuildingsGFCI Protection in Other Than Dwelling Units Under NEC 210.8(B)Surge Protection Requirements for Dwelling Units and Sleeping QuartersWorking Space, Equipment Door Swing, and Egress Around Electrical EquipmentThis electrical code training episode is designed to help listeners better understand how the National Electrical Code applies in the field and why small wording changes can create major inspection, design, and installation issues. Whether you are studying for an electrical exam, preparing for NEC continuing education, performing electrical inspections, reviewing plans, installing service equipment, working on commercial electrical systems, or trying to understand the latest 2026 NEC changes, this episode provides clear, practical Code insight.If you work with the 2023 NEC, are preparing for the 2026 NEC, or want to strengthen your understanding of electrical code rules for grounding, bonding, GFCI protection, surge protection, service equipment, transformer secondary conductors, limited-energy systems, and electrical working space, this episode gives you practical NEC guidance you can use immediately in the field.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode of Master The NEC Podcast, we break down important 2023 NEC and 2026 NEC electrical code topics that every electrician, electrical inspector, plans examiner, contractor, engineer, and code professional should understand. This episode focuses on practical National Electrical Code questions, real-world field applications, and common mistakes made when applying NEC rules in residential, commercial, and industrial electrical installations.We discuss how load calculations changed from Article 220 in the 2023 NEC to Article 120 in the 2026 NEC, including how continuous loads, noncoincident loads, heating and air-conditioning loads, EV charging equipment, grounding, bonding, wet-location raceways, raceway bend limits, conductor ampacity, and detached building feeders should be properly evaluated.Topics covered in this episode include:2023 NEC Article 220 vs 2026 NEC Article 120 Load CalculationsHeating vs Air Conditioning Loads and Noncoincident Load RulesMultiple Air-Conditioning Units and the 125% Largest Motor RuleEV Chargers, EVSE Continuous Loads, and NEC Article 6252026 NEC Article 624 vs Article 625 for Electric Vehicle Power Transfer SystemsDamaged Conductors and Wiring Methods in the 2026 NECWet-Location Raceways and THHN/THWN-2 Conductor RequirementsThe 360-Degree Raceway Bend Rule and Mixed Raceway SystemsGrounding Screw Color Rules for Boxes, Devices, and Main Bonding JumpersNeutral and Equipment Ground Separation on Feeder Panels and Detached BuildingsThis electrical code discussion is designed to help listeners better understand the National Electrical Code, avoid common NEC violations, improve electrical inspection accuracy, and apply the Code correctly in the field. Whether you are studying for an electrical exam, preparing for an electrical inspection, performing plan review, installing EV chargers, sizing conductors, calculating electrical loads, or working with grounding and bonding systems, this episode provides practical NEC training you can use immediately.If you work with the 2023 NEC, are preparing for the 2026 NEC, or want to strengthen your understanding of electrical code changes, this episode delivers a clear and practical breakdown of key NEC topics every electrical professional should know.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode we talk about the 2026 National Electrical Code and the major changes in Article 300 from the 2023 NEC to the 2026 edition of the National Electrical Code. Listen as Paul breaks down some of the changes, renumbering, and subtle changes that all electricians need to be aware of as they venture into the last published edition of the National Electrical Code.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode we talk about the 2026 National Electrical Code and the major differences in Article 625 for Electric Vehicle Power Transfer System and Article 624 for Electric Self-Propelled Power Transfer Systems. In this podcast we will explain the difference between the two and where the lines are drawn for those electricians who will be working on both types of systems.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode we talk about the 2026 National Electrical Code and how finally 120.6, which was previously 220.60, is not clean and straight to the point. In this little podcast we will bring it to life and explain how you would utilize it in an everyday situation. A casual conversation about how to treat the loads.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode we talk about some Wannabe “Engineer” who claims they are “The Electrical Expert” and wants to talk engineering theory with an NEC Guy. Yep, you guessed it, as someone who has been at the highest level of electrical code training for nearly 40 years there is always “That One Guy” so I guess that guy is Thomas. Well, we have issued an OPEN CHALLENGE to “Thomas” and clearly we have provided our email address at [email protected] so we can coordinate the LIVE STREAM and see what “Thomas” knows in terms of the NEC.Nope, I only debate what I am an expert on and that is the National Electrical Code and Manufacturer Listings per ASTM, UL, and NEMA where necessary. So, if “Thomas” wants to debate electrical engineering theory then he will need to take his comments somewhere else, I am an NEC guy and always have been. Also we talk about Stack Caddy a little bit as well so join us for this quick podcast. Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode will introduce you to what is happening at ECA, Inc. and also tell you about our latest product line of Stackable Modular Storage Systems known as Stack Caddy™ as well as our fun new line of Wire Nut inspired koozies, drill bit holders, and containers for Electricians. The have introduced an entire line devoted to organizing your What Nots for the trade. Organize It, Stack It, and Carry It at a totally next level. We are more than just amazing educators, we are inventors and patent holders and real electricians who cut their teeth in the field.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Also do not forget about the new Stack Caddy™ Product Line introduced by Paul and his Team for 2026. From the Modular Storage System to their Wirenut inspired koozies and storage products found at https://stackcaddy.comBecome a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode is what the upcoming articles that will be featured in EC and M Magazine starting in July 2026 and why Electrical Inspectors and Electricians will want to read it. Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc. will be discussing the intricate relationship between electrical inspectors and electricians and how they both may see things differently while they both are walking the fine line of balance to applying the National Electrical Code.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Also do not forget about the new Stack Caddy™ Product Line introduced by Paul and his Team for 2026. From the Modular Storage System to their Wirenut inspired koozies and storage products found at https://stackcaddy.comBecome a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode is powerful because we introduced a free course on NECCHAT.com for Mastering Conductor Ampacity. The new social forum is designed for apprentices and electricians to join in by posting images, videos, random posts, as well as electrical specific topic questions for like minded individuals who enjoy a great conversation without disagreements and arguing. In this episode, we also answer a few questions submitted to Let’s Ask Paul as well so if you want your CODE FIX then listen to the last part of this episode.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

Big news is coming from Electrical Code Academy, Inc.In this episode, Paul Abernathy shares the recent agreement between Electrical Code Academy, Inc. and EC&M Magazine, where Paul will be contributing six articles annually, along with twelve videos and twelve podcast episodes each year focused on key issues affecting the electrical industry.The content will cover important developments in the 2026 National Electrical Code, but it will also go deeper into one of the most important relationships in the field: the interaction between electrical inspectors and electricians.Paul will discuss how inspectors and electricians often approach the NEC from different perspectives, why interpretation can sometimes lead to disagreement, and why professionalism, communication, and mutual respect are essential for every project to succeed. Whether you are an electrician, inspector, contractor, engineer, AHJ, or code professional, this episode sets the stage for a powerful new series designed to bring clarity, practical insight, and real-world experience to the NEC conversation.With nearly four decades in the electrical industry, including experience as a master electrician, electrical inspector, electrical supervisor, plan review professional, and NEC Code-Making Panel member, Paul brings a unique perspective to both sides of the inspection process.This new collaboration with EC&M Magazine is about more than articles, videos, and podcasts. It is about helping the industry better understand the NEC, improve communication in the field, and build stronger working relationships between electricians and inspectors.Topics include:The new EC&M Magazine collaborationThe upcoming 2026 National Electrical CodeCommon challenges in NEC interpretationThe relationship between electricians and inspectorsWhy respectful disagreement mattersHow better communication leads to safer, smoother projectsWhat listeners can expect from the upcoming article, video, and podcast seriesWhether you are preparing for the next code cycle, working in the field, performing inspections, designing electrical systems, or training the next generation of electricians, this episode is one you do not want to miss.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this motivational episode, we explore why persistence and preparation are the keys to passing your electrical exam. Too many aspiring electricians fail because they either cram at the last minute or don’t use their study programs effectively.Research from Cornell’s Learning Strategies Center shows that breaking your study sessions into shorter periods over several days leads to better exam performance than marathon cramming. We’ll discuss how giving yourself ample time and using active preparation and review—creating flash cards, testing yourself and mixing up topics—can make the material stick.We also dive into our Fast Trax® program, a structured learning tool that offers step‑by‑step NEC code training, in‑depth exam prep and interactive courses designed for apprentices, journeymen and master electricians. Properly following a program like this is crucial; it provides guided lessons on grounding, bonding, load calculations, conductor ampacity and more.We’ll share stories of students who struggled because they didn’t commit to the schedule and how adjusting their approach turned things around. Tune in to learn strategies for staying on track, keeping your confidence high and ensuring you walk into the exam prepared and ready to succeed.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode is powerful because it addresses a question posed via the Let’s Ask Paul Portal at https://FastTraxSystem.com. Today’s questions are about using a 15A Receptacle on a 20A Commercial Branch Circuit and a classic Transformers Question.Of course, we will also chat about anything, so come on and listen. We are excited to announce that we have passed 2,000,000 unique downloads this year. Thank you to everyone for your support and for keeping the podcast alive while I have been taking care of my wife and family.Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode is powerful because it focuses on a question presented to NECA as a Question of the Day. Listen as Paul explains the use of PVC on a fuel dispensing pump, and its use of Rigid Metal Conduit, and the question is about the bonding rules. Let’s break it down and expand on the answer provided by NECA to the individual who submitted the question.Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, we tackle one of the hardest truths in entrepreneurship—knowing when a business isn’t ready to stand on its own. Too many people pour thousands of dollars, years of time, and even money from family into ventures that simply aren’t producing enough income to survive. At some point, determination can turn into financial damage. We discuss how to recognize when it’s time to shift gears, get a steady job to stabilize your finances, and move the dream into a side hustle instead of letting it destroy your bank account and relationships. Stepping back from a struggling business isn’t giving up—it’s making a strategic decision to protect your future while continuing to build your vision the smart way.Opening QuestionsAt what point does a business stop being a “startup phase” and start becoming financial self-destruction?How do you know the difference between “pushing through hard times” and “refusing to accept reality”?Is it possible that the smartest business decision you can make is getting a full-time job?Why do so many entrepreneurs treat the idea of getting a job like it's failure?Is pride the biggest reason people keep pouring money into a dying business?Reality Check QuestionsIf your business hasn’t paid you in a year, is it really a business or just an expensive hobby?How many months of losses should someone realistically tolerate before reassessing?If your spouse or family is financially supporting your “business,” are you really running a business?When you start borrowing money from family to keep a business alive, has it already crossed the line?Is there a point where continuing a failing business becomes irresponsible to your family?Ego vs RealityWhy do entrepreneurs sometimes confuse stubbornness with determination?Is quitting the wrong business actually a smart entrepreneurial move?How much of entrepreneurship is about knowing when to pivot or pause?Do social media success stories make people feel like they must grind forever even when it's not working?The Side Hustle StrategyWhy is turning a struggling business into a side hustle often the smartest move?What are the advantages of building a business while working a stable job?How does having steady income actually help a business grow smarter?Why do many successful businesses start as side hustles rather than full-time ventures?Is it better to grow slowly with stability rather than forcing growth with debt?Financial ResponsibilityWhat financial signals tell you it’s time to stop treating something like a full-time business?Should every entrepreneur set a financial “kill switch” before starting a business?How much savings should someone realistically have before trying to go full-time with a startup?Is taking money from family to support a failing business ever justified?What’s the long-term damage to relationships when businesses collapse after family investments?Hard Truths SegmentIs it possible that some ideas are just not viable businesses?How do you know when the market has spoken?What’s the difference between “this needs more time” and “this will never work”?Why is it sometimes smarter to pause a business than destroy your finances trying to save it?Encouragement SegmentDoes moving a business to a side hustle mean the dream is over?Can getting a stable job actually accelerate your future success?Why is patience often the missing ingredient in entrepreneurship?Is the real entrepreneurial skill knowing when to adapt instead of when to grind harder?Powerful Closing Question “Is the goal to prove you're an entrepreneur, or to actually build something sustainable?” Strong Closing Statement You Could Use “A real entrepreneur isn’t someone who refuses to quit. A real entrepreneur is someone who refuses to destroy their future chasing something that isn’t ready yet.”Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In today’s connected world, burning bridges in the electrical industry can cost you far more than you realize. In this episode, The Electrical Guru dives into the real-world consequences of publicly criticizing inspectors, manufacturers, educators, and fellow electricians—especially on social media.The electrical trade is a tight-knit community where reputations travel fast, and opportunities often depend on professional relationships built over years. One emotional post or public rant can quietly damage your credibility, limit future support, and close doors you didn’t even know were open.Whether you’re an electrical contractor, apprentice, inspector, or industry professional, this episode delivers straight talk on why professionalism matters, how online behavior impacts your business, and what smart electricians do instead of burning bridges.If you’re serious about long-term success in the electrical industry, this is a conversation you don’t want to miss.Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode is powerful because it focuses on the value of Home Inspectors to the electrician and not just the buyer and/or seller. You may be shocked, pun intended, to learn what Paul Abernathy, a nationally recognized electrical expert, thinks about home inspectors and what they bring to the table for electricians. We, as electricians and electrical contractors, are always looking to grow our business, to increase our exposure, and to simply be the best we can be.So, embracing the Home Inspection Industry is very important to an electrical contractor’s success. Yes, I know the actual Electrician likes to bash the stuff in a home inspection report when things are called out that seem frivolous, but at the end of the day, you, the Electrician, are getting paid to either fix the issues or give a detailed explanation of what is acceptable. Once that interaction is done, it’s up to the negotiation between the buyer and seller, and nothing you say in a report, be it the home inspection report or electrical follow-up evaluation, should be biased or one-sided. State the facts, collect your check, and move on. Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode is powerful because it focuses on the importance of soft skills, such as communication and conflict mitigation, that all service employees need to be trained to understand the importance of Soft Skills in the Trades. The company's reputation can be destroyed by one bad service call. The results of poor people skills can undo thousands of hours, if not years of hard work, when it could have all be avoided with some soft skills training.Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

🧠 Being the best electrician in the world does not make you the best electrical contractor — and it definitely does not guarantee business success. In this episode, Paul Abernathy breaks down the uncomfortable truth most electricians never hear:Technical skill alone does not build profitable, scalable electrical contracting businesses. You’ll learn:Why customers don’t buy your technical ability — they buy your company imageThe difference between being a great electrician and a great electrical contractorHow branding, professionalism, communication, and systems drive real growthWhy so many talented electricians fail as business ownersWhat successful electrical companies actually focus onIf you're an electrician, electrical contractor, service technician, or business owner in the trades, this episode will fundamentally change how you think about success.🎧 Listen now and start building a company that grows with or without you.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode is powerful because it provides an overview of a critical concept: effectively removing electrical power from a circuit or equipment and restoring it to an electrically safe condition.This podcast episode will provide a summary and overview of the 2-hour video on FastTraxTube.com, which discusses creating an Electrically Safe Working Condition using NFPA 70E and OSHA 1910.333 practices. This is a great listen before watching the video on FastTraxTube.com for an in-depth understanding of lockout and tagout procedures and all the necessary things to create an electrically safe work environment. Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

Grounding and Bonding Course – 2023 NEC® Mastery for Electricians The Grounding and Bonding Course at FastTraxSystem.com is the most comprehensive and technically accurate online training program available for mastering electrical grounding and bonding systems under the 2023 National Electrical Code (NEC®). This course goes far beyond basic grounding theory. It provides real-world application of Article 250, including a deep technical breakdown of:Equipment Grounding Conductors (EGCs)Supply-Side Bonding Jumpers (SSBJs)Main Bonding JumpersSystem Bonding JumpersGrounded Conductor bondingService vs. feeder groundingSeparately Derived Systems (SDS)Effective ground-fault current pathsBonding of enclosures, raceways, and structural metalSizing rules using Tables 250.122 and 250.102(C)(1)Students learn how and why grounding and bonding rules exist, how fault current flows, and how to properly design and install grounding systems that meet 2023 NEC compliance, improve system safety, and eliminate costly inspection failures. This course is ideal for:Journeyman ElectriciansMaster ElectriciansElectrical InspectorsElectrical EngineersElectrical ContractorsApprentices preparing for licensing exams⚡ What Makes This Course Different Unlike generic grounding classes, this program teaches the engineering logic of fault-current return paths, explains the difference between service-side bonding and load-side grounding, and clearly distinguishes when conductors are classified as SSBJs vs EGCs — a topic that causes massive confusion in the field. You will master:Proper bonding on the line side of the service disconnectCorrect sizing of supply-side bonding jumpersWhen Table 250.122 does and does not applyHow NEC grounding rules interact with overcurrent device operationHow improper bonding leads to dangerous voltage on metal enclosuresBy the end of this course, you will understand grounding and bonding at the same technical level as electrical engineers, inspectors, and code panel members. 🧠 Why This Training Matters Improper grounding and bonding is one of the leading causes of electrical shock hazards, equipment damage, nuisance tripping, and failed inspections. Mastery of grounding and bonding is required for:Safe fault-current operationProper breaker clearingElimination of stray voltageLightning and surge controlReliable electrical system performanceThis course gives you complete command of NEC Article 250 so you can install with confidence and pass inspections on the first attempt.🎯 Optimized Description: Learn NEC 2023 grounding and bonding. Master EGCs, supply-side bonding jumpers, Article 250, fault current paths, and pass electrical inspections. 🧩 Optimized Short Course Summary: Master electrical grounding and bonding using the 2023 NEC®. Learn Article 250, EGCs, supply-side bonding jumpers, fault-current paths, and inspection-proof installations. 🧱 Primary Keywordsgrounding and bonding courseNEC grounding and bondingArticle 250 trainingelectrical grounding classequipment grounding conductorsupply-side bonding jumpergrounding for electriciansbonding for electriciansNEC 2023 grounding and bondinghow to size equipment grounding conductorhow to size bonding jumperservice grounding vs feeder groundingeffective ground fault current pathNEC Article 250 explainedelectrical code grounding requirementsgrounding and bonding for inspectorselectrical grounding certificationBecome a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

Certified Thermal Electrician™ is the most complete thermal imaging certification program built specifically for electricians, electrical inspectors, and electrical contractors. This video is a sample from our program lesson on Understanding Severity in Electrical Thermal Imaging.This professional thermal imaging training teaches you how to safely perform infrared inspections, interpret thermal images using ΔT analysis, apply NFPA 70B & NFPA 70E standards, and write defensible inspection reports that protect both your customer and your license. Whether you are an electrician, master electrician, electrical contractor, facility maintenance technician, or electrical inspector, this course gives you real-world field skills you can apply immediately. 🔧 What You Will Learn✔ How to properly use thermal cameras for electrical inspections✔ How to calculate and interpret ΔT (temperature difference)✔ How to classify findings using the official Green / Yellow / Orange / Red severity system✔ How to perform thermal inspections on panels, motors, transformers, bus systems, VFDs, and control equipment✔ How load conditions affect thermal results (I²R heating explained)✔ How to avoid common thermal imaging mistakes✔ How to write professional NFPA-compliant inspection reports✔ How to turn thermal imaging into a profitable service offering🏗️ Built on Industry Standards This program is aligned with: • NFPA 70B (Electrical Equipment Maintenance)• NFPA 70E (Electrical Safety in the Workplace)• NETA Maintenance Testing Specifications• NEC Article 110 & 310 thermal principles🧑‍🏫 Who This Course Is For• Electricians• Master Electricians• Electrical Contractors• Electrical Inspectors• Facility Maintenance Professionals• Industrial Electricians• Preventive Maintenance Technicians💼 Why Electricians Need Thermal Imaging Most electrical failures begin as heat.Loose connections, overloads, phase imbalance, and deteriorating components all show early warning signs long before failure occurs.Thermal imaging allows electricians to detect these problems early — preventing fires, outages, downtime, and costly repairs.🎓 Get Certified Learn more about the Certified Thermal Electrician™ program here:👉 https://ThermalElectrician.comBecome a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode is powerful because it focuses on the free thermal imaging calculators we have at ThermalElectrician.com and how they can be useful to anyone who is using a thermal camera in the field for accurate and reliable results. Listen as Paul Abernathy, CEO of Electrical Code Academy, Inc., and creator of the Certified Thermal Electrician program. Taking great electricians and making them amazingly great electricians.Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode is powerful because it focuses on when untrained thermography experts peddle fear instead of facts to gain customers. In fact, in this episode, we talk about a few examples where a contractor lied to a customer and how that very act can give the profession a bad name. There is a difference between a Thermographer and a Certified Thermal Electrician, and we set the record straight in this episode. Sit back and enjoy the show.Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

This episode is powerful because pricing is the #1 issue that destroys contractor profitability, confidence, and scalability. Episode 47 positions YOU to become the authority who understands your value and breaks free from fear-based pricing. Many contractors are working their pricing backward, using an hourly rate, and actually have no idea what their cost of doing business actually is. They fight the low-cost competition only to put themselves out of business chasing that white rabbit down the hole of No Future. Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about that famous plateau that many contractors experience as they attempt to grow their business. It’s not just a mental block; it is a real limitation that will stunt your business growth if you do not learn how to overcome it. In this episode, we will dig into all these topics to help you break that limitation and strive for growth.Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul discusses the importance of building a strong relationship with your customer from the outset, enabling the cash cow to flourish and ultimately drive growth. Learn the touchpoints to building a relationship with your customer and now to retain their business in the future. This is not rocket science, but there is a proven method for building success with repeat business rather than trying to fight the lead magnet mentality to always gain new customers. You already have a goldmine with your existing clients if you know how to market to them. Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about how important it is to have NEC and other construction standards readily available when doing installations or inspections. In fact, making sure you are doing it right the first time sends a message to the customer that you know what you are doing and to the inspector that you are the best in the business. Without a tailored AI model designed for all trades, we can ensure you get the right results fast and accurately while in the field and on the job. Give TradeHog.Net a TRY for free and ask the HOG any questions you want. Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

Why Every Electrical Contractor Needs a Thermal Imaging Camera — And How It Will Transform Your Service Business. Learn more about our certification program at https://thermalelectrician.comWelcome back to another powerful episode of the Master The NEC Podcast, the show that helps electricians, contractors, inspectors, and professionals stay sharp, stay informed, and stay ahead of the curve. I’m your host, Paul Abernathy, your Electrical Guru, and today we’re diving into a topic that is transforming the electrical service industry: Why every electrical contractor — yes, EVERY ONE — needs a thermal imaging camera on every service call, not as an add-on.Not as “something we do sometimes.”But as a standard part of your professional toolkit. And we’re going to go deep into:NFPA 70B requirementsHow to create proper loading conditionsResidential and commercial applicationsI²R heating and hidden failuresHow thermal diagnostics increase profitabilityAnd why mastering this skill is essential for modern electriciansAnd of course, how all of this ties directly into becoming a Certified Thermal Electrician™ with Electrical Code Academy, Inc. Let’s get into it.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about how to determine the ampacity of single insulated conductors, such as THHN, when applying ampacity given in Table 310.16 and how to apply adjustments and corrections per 310.15(B)(1)(1) and 310.15(C)(1) for the 2023 National Electrical Code. However, these fundamental basics of conductor ampacity ring true regardless of the NEC you are using. This is a LONG podcast to prepare for nearly 2 hours of podcast instructions as Paul attempts to paint a mental picture of ampacity and how it impacts the conductors.Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about how to prepare for an electrician exam the correct way. In this episode, Paul will explain how to help have a higher rate of success on an electrical exam, as well as tips on doing better during the electrical exam and in your preparation study time. The Fast Trax® Program is a structured learning program for the 2020 National Electrical Code and the 2023 National Electrical Code. Even if you are not taking an electrical exam, we have Mastering the NEC courses as well as Grounding and Bonding courses. Paul Abernathy is known as the Godfather of Structured Electrical Exam Prep, and in this podcast episode, he explains why he can help you be successful on the exam and in the field.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about a massive announcement and industry-leading partnership between one of the largest manufacturers of thermal imaging products and Electrical Code Academy, Inc.We are poised to actually bring a change to the Thermography World with the only Electrician Specific thermal imaging course, and how to use it in your daily world, and for special conditions. This will be the biggest partnership of our CEO’s career, and it is within 7 days of being a reality. Visit https://ThermalElectrician.com to learn more and get started.Listen as Paul Abernathy, CEO and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC, then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked the following question. Listen as Paul breaks down a question about AI (Artificial Intelligence) and how it will affect the Trades in the future and what do we think AI will take over and how it will play out over the next 10 years. We also send a message to NFPA about their BULLY TACTICS with NFPA 70, which is created by YOU the electrical community. You won’t want to miss this episode.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked the following question. Listen as Paul talks about 5 steps that must be achieved to become an electrician, regardless of the state you are located in. The reason that most folks fail to achieve the dream of becoming an electrician is because they lose focus on the path. On today’s podcast we talk about the path you need to be laser focused on following if you are in your early 20’a to mid-30’s.  The goal is to make your late 40’s to 70’s as pleasant as possible.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about 250.122 and how the EGC will be sized per the 2026 National Electrical Code. While I do not like this change, I will nonetheless teach it and break it down for everyone since there was a huge change when it comes to parallel raceways.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about 210.70 in terms of Lighting Outlets. We will talk about where the “battery” backup aspect of the NEC disappeared to. So, this episode is all about lighting outlet requirements.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about the new structure of the 2026 National Electrical Code. To begin any journey into the NEC we have to look at the structure. In the 2026 edition we see a focus on limited energy sources and how they are newly structured in Chapter 7. Big changes that will yield simplistic results that help learners of the NEC start to understand. Come with me on this opening journey.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about working clearance and chimes in on the debate about the requirement for working clearance and if it’s even required for Transformers. Now, we are not talking Utility Transformers as we all know PAUL doesn’t talk about utility stuff. Also, he addresses the working clearance for the AC Disconnect in this episode also.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about how to engage with a customer who needs your services but are hesitating on the purchase. They need “a little more time” and so on. Well, in this episode Paul talks about how to overcome that hesitation, ask for the sale, and educate them in the process. It’s not about being pushy, it’s all about being an authority.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul talks about how to engage with a customer who may not be happy, for whatever reason, with you and your company while on a service call or other interaction. Listen as Paul explains how to get to a Win-Win and you retain that hard earned lead while salvaging your local referral reputation.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this powerful episode of The Master The NEC Podcast, Paul Abernathy breaks down the essential steps every electrician needs to take to build a recognizable, respected local electrical brand.Whether you're a solo master electrician or running a growing electrical contracting business, branding isn't just about logos—it's about how your community sees you, trusts you, and calls you first when they need the job done right.You'll learn:✅ How to define your identity and stand out from the crowd✅ The visual branding elements that build credibility✅ Must-have digital tools like Google Business and social media✅ How customer experience fuels your reputation✅ Proven methods for earning 5-star reviews✅ Community involvement strategies that build trust✅ Ways to educate your audience and establish authority✅ How to stay consistent and grow your brand long-termIf you're serious about growing your electrical business, this episode is your no-nonsense blueprint to building a brand that lasts. 📢 Share this with a fellow electrician who's ready to go from invisible to unforgettable.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

I had a powerful conversation with an electrician who was just let go from his job—devastated, unsure, and questioning his next move. But instead of staying down, I talked him into leveling up. 💪 We flipped the script. I showed him how to take his skills, his drive, and his knowledge of the trade—and build something of his own. 💼⚡This isn't just about getting fired. It’s about freedom. It’s about taking control of your future and betting on yourself. If you're an electrician—or in any trade—and you've ever felt stuck, overlooked, or undervalued, this is the episode you can’t afford to miss. Tune in and get fired up.🔥 This story could be YOUR wake-up call to finally become your own boss. 🎧 Listen now and get inspired!Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

Elevate Your Expertise: Become a Certified Master Electrical Code Professional® (CMECP®) Are you a Master Electrician ready to set yourself apart from the competition? The CMECP® program at CMECP.org is the premier professional development opportunity designed exclusively for licensed Master Electricians who want to take their National Electrical Code (NEC) knowledge to the next level.This elite certification is not a replacement for a state license—it's a powerful credential that enhances your professional image, deepens your NEC expertise, and demonstrates your commitment to code excellence and safety. In a highly competitive industry, becoming a CMECP® Professional helps you stand out by showing clients, inspectors, and peers that you’re not just code-compliant—you’re code-confident. Why Become a CMECP® Professional? ✅ Advance Your NEC Mastery✅ Market Yourself as an Industry Expert✅ Stand Out Among Other Master Electricians✅ Gain Recognition and Trust✅ Expand Your Business OpportunitiesWhether you’re running your own contracting company, consulting on high-level projects, or teaching future electricians, the CMECP® designation gives you a distinct competitive edge.Not a License—A Level Above The CMECP® certification does not replace or remove your licensing requirements. Instead, it’s a voluntary, prestigious distinction for licensed Master Electricians who want to go beyond the minimum standard and prove they are among the top electrical minds in the field.Be the Leader Others Look To Join the ranks of elite professionals who wear the CMECP® title with pride. If you're serious about your trade, passionate about electrical code, and driven to be the best—then CMECP® is your next step.👉 Visit CMECP.org today to learn how to become a Certified Master Electrical Code Professional®. Keywords for SEO:Master Electrician CertificationAdvanced Electrician TrainingElectrician Professional DevelopmentNEC Expert CertificationElectrician Code TrainingElectrical Code CertificationCMECP® Program for Master ElectriciansNon-licensing Electrician CredentialBecome a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

Master The NEC | Episode 26  is about the importance of Pull Calculations in medium to large scale projects where the owners, such as the Amazon's of the world, and the electrical contractor and electrical design professional want a third part to do pull calculations to ensure the utmost accuracy of the pull by reducing the risk of conductor damage during the pull but also long term.Remember, the product is only successful if the conductors or cable are not damaged. A code compliant installation of raceways do not always mean the conductors will go into the raceway system without damage to the installation. We provide specific Check Lists to every pull based on our analysis of each individual pull. The newest trend is to asign this assurance to the experts and our PullSPEC™ services provides that extra level of assurance. All pull calculations and analysis reports are confirmed by wire and cable experts with over 11 years of dedicated service to that industry as well as nearly 40 years of NEC expertise.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked the following question. Listen as Paul breaks it down and how you have to make some assumptions based on the general rules and only answer exam questions as they are presented.Q: The maximum size of a circuit breaker that can be installed for 1 AWG THW feeder tap conductors is _____________ A. Answers:A)     100B)     110C)     125D)     150Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked a question about where to find the 2 foot – 4 foot and 5 foot – 12-foot rules for receptacle spacing in the NEC, and why they do not see the 4 foot, or 12 feet mentioned. We also answer a question on do standalone sprinkler systems have to have a dedicated circuit and all the labeling requirements of a fire alarm system per NEC 760.41(B). Well, we have the answer for you on this episode so enjoy.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planetBecome a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked a question about wide spread confusion over the last sentence in 680.26(B)(6)(a) regarding the use of a double insulated water pump motor for pool applications in Article 680 Part II. What do you do with that 8 AWG CU Solid Bonding Jumper when you take it to the pool pump motor and find out it is a special double insulated system motor. Well, we have the answer for you on this episode so enjoy.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked a question about tariffs and my thoughts on them and how it will help America become the greatest nation in the world. AGAIN.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul will announce some new Virginia CE Code Update Seminars coming to Virginia starting in the summer of 2025. These seminars will be “ACTION” packed with NEC Code and Real Works Situations that only Paul can deliver. This will be a MUST ATTEND event that will be located at convenient locations on the east and west of Central Virginia. These events will be a MUST attend and updates will be posted at https://fasttraxsystem.com/events in the coming months.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul was asked a question about the location allowance of panels in locations such as stairwell areas and about the loads for a service or feeder with regards to EVSE. In fact, this episode may help clear up some confusion on some basic load calculations for those EV Lovers.Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visit https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.

In this episode, Paul will talk about voltage drop and the requirements of VD as provided by Articles 647 and 695. However, what about the mandates in the International Energy Conservation Codes (IECC) C405.10 where it mandates an overall 5%.Well, in this episode we talk about it and break it down. Listen as Paul Abernathy, CEO, and Founder of Electrical Code Academy, Inc., the leading electrical educator in the country, discusses electrical code, electrical trade, and electrical business-related topics to help electricians maximize their knowledge and industry investment.If you are looking to learn more about the National Electrical Code, for electrical exam preparation, or to better your knowledge of the NEC then visits https://fasttraxsystem.com for all the electrical code training you will ever need by the leading electrical educator in the country with the best NEC learning program on the planet.Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.