All Episodes

The Truth About GFCIs — UL 943, Floating Generators, Bonding & Current Paths

Data Centers, Local Resources, and Government Failure

Flat Rate vs. Time and Material: How Electrical Contractors Should Price for Profit

10 Important Tax and Write-Off Reminders for Electrical Contractors

The AI Data Center Gold Rush: Why Electricians Are Becoming America’s Most Valuable Workers

The Socialist Short Circuit: How Government Control Could Destroy the Electrical Industry

Master The NEC | Episode 69 | 8 NEC Code Questions on GFCI, Service Disconnects and More

Master The NEC | Episode 68 | 10 Code Questions That Confuse Electricians

Master The NEC | Episode 67 | What has changed in Article 300 from 2023 NEC to 2026 NEC?

Master The NEC | Episode 66 | What is Different between Article 625 and 624 in 2026 NEC?

Master The NEC | Episode 65 | 2026 NEC and 120.6 Noncoincident Loads Finally

Master The NEC | Episode 64 | Ok Thomas….Game On and Other News

Master The NEC | Episode 63 | What the Heck is Stack Caddy?

Master The NEC | Episode 62 | So What’s the EC and M Articles About?

Master The NEC | Episode 61 | NECCHAT.COM and Some Let's Ask Paul

Master The NEC | Episode 60 | Electrical Code Academy, Inc. and EC & M Magazine Unite

Master The NEC | Episode 59 | Never Give Up: Ace Your Electrical Exam With the Right Study Plan

Master The NEC | Episode 58 | A Few Code Questions and What’s Happening Now

Master The NEC | Episode 57 | Reviewing a NECA Question of the Day

When the Dream Needs a Day Job: Turning a Failing Business Into a Side Hustle

Master The NEC | Episode 55 | Burning Bridges in the Electrical Industry

Master The NEC | Episode 54 | My Thoughts on Home Inspectors

Master The NEC | Episode 53 | Do Your Service Techs have Soft Skills?

Master The NEC | Episode 52 | Being the Best Electrician Will NOT Make You Successful

Master The NEC | Episode 51 | Overview of Electrically Safe Condition

The Bond and Ground Podcast | E9 | SSBJ vs EGC and How They Differ

Master The NEC | Episode 50 | Understanding Thermal Severity in Thermography

Master The NEC | Episode 49 | Why Calculators Matter for Thermal Electricians

Master The NEC | Episode 48 | Thermal Imaging is full of Misconceptions

Master The NEC | Episode 47 | Charging What You’re Worth Without Fear

Master The NEC | Episode 46 | Why Most Contractors Plateau and Break Through

Master The NEC | Episode 45 | The Contractor’s Blueprint for Repeat Business

Master The NEC | Episode 44 | The Best Ai for Contractors

Why Every Electrical Contractor Needs a Thermal Imaging Camera and Course

Master The NEC | Episode 42 | Ampacity of Conductors Explained

Master The NEC | Episode 41| Preparing for an Electrician Exam Properly

Master The NEC | Episode 40 | A Big Partnership is Coming!

Let’s Ask Paul Podcast | Episode 213 | Will AI Take My Job? | Message To NFPA

Let’s Ask Paul Podcast | Episode 212 | So You Wanna Be an Electrician?

Master The NEC | Episode 36 | 2026 NEC Change about 250.122 for EGC’s

Master The NEC | Episode 35 | Let’s Explain 210.70 for the 2026 NEC

Master The NEC | Episode 34 | First Looks at the 2026 NEC Structure

Master The NEC | Episode 33 | Working Clearance for Transformers?

Master The NEC | Episode 32 | 5 Tips for Overcoming Buyer Hesitation

Master The NEC | Episode 31 | 5 Tips to Salvage Unhappy Customers

How to Build a Local Brand as an Electrical Contractor – Step-by-Step Guide

Master The NEC Podcast | 🔥 He Got Fired… Now He’s His Own Boss! 🔥

Master Electricians | Go From Good to Great via Certification Programs

PullSPEC Pull Calculation Services | The third party solution to pull calculation accuracy

Let’s Ask Paul Podcast | Episode 209 | Exam Prep Question about Feeder Tap Conductor Sizing

Let’s Ask Paul Podcast | Episode 208 | Wall Spacing Question and Sprinkler Systems and Horns

Let’s Ask Paul Podcast | Episode 207 | Double Insulated Pool Pumps and the Equipotential Bonding Grid

Let’s Ask Paul Podcast | Episode 205 | Tariffs…Tariffs…. Tariffs…..Stop Crying !

Master The NEC | Episode 22 | Special Alert | Seminars Coming to Virginia!!!

Let’s Ask Paul Podcast | Episode 204 | Panels in Stairwells and EVSE Loads

Master The NEC | Episode 21 | Where is Voltage Drop Required and what does the IECC Say?

Let’s Ask Paul Podcast | Episode 203 | Green Constructor Between Meter and Service?

Let’s Ask Paul Podcast | Episode 202 | Artificial Intelligence for the Trade

Master The NEC | Episode 20 | Nikola Tesla Today: Would He Be Amazed or Annoyed?

Master The NEC Podcast | Episode 19 | Where are the FREEBIES on FastTraxSystem.com

Let’s Ask Paul Podcast | Episode 201 | Multiple Feeders & GEC Landing on Service Change

Let’s Ask Paul Podcast | Episode 200 | They say you are too young to be the BOSS?

Master The NEC | Episode 18 | Engaging Disgruntled Customers and Winning

Master The NEC | Episode 17 | Grassroots Marketing Concepts for Contractors

Let’s Ask Paul Podcast | Episode 199 | Question about sizing the GEC Common Conductor

Master The NEC | Episode 16 | MC Cable and Bundling per 310.15(C)(1)

Let’s Ask Paul Podcast | Episode 198 | Why do I not chat on Tik Tok, Facebook, or Instagram?

Master The NEC | Episode 15 | Disgruntle Workers and Impressionable Helpers

Master The NEC | Episode 14 | Revisiting EMT Fastening on 30” between boxes

Let’s Ask Paul Podcast | Episode 197 | Explaining Dry, Damp, and Wet Locations

Let’s Ask Paul Podcast | Episode 196 | Explaining 210.11(C)(2) and 210.52(F)

Let’s Ask Paul Podcast | Episode 195 | NM Cable always requires junction boxes at splices?

Let’s Ask Paul Podcast | Episode 194 | Bonding Water Piping Systems in Dwellings

Master The NEC | Episode 13 | Metal Clad Cable and Vertical Supports

Master The NEC | Episode 12 | The Old 6 Inch Free Conductor Discussion 300.14

Master The NEC | Episode 11 | Arc Fault Circuit Interrupters – UL 1699 Overview

Master The NEC | Episode 10 | Handling Depression in the Electrical Trade

Master The NEC | Episode 9 | Good vs Bad Electricians - Differences

Master The NEC | Episode 8 | Keeping Business and Personal Financed Separated

Let’s Ask Paul Podcast | Episode 193 | EV and Dryer on Same Circuit and SE Cable Uses

Master The NEC | Episode 7 | Electricians and Life and Work Balance

Let’s Ask Paul Podcast | Episode 192 | Is adding a service disconnect outside a service upgrade?

Master The NEC Podcast | Episode 6 | Electrical Contractors Budget Friendly Marketing

Master The NEC Podcast | Episode 5| EV Vehicles, Stats, Growth, and Opportunity

Master The NEC Podcast | Episode 4| EV Chargers and CEEA™ Information

Master The NEC Podcast | Episode 3| Supply Side Bonding Jumper vs Equipment Grounding Conductors

Master The NEC Podcast | Episode 2| Tips for Electrical Contracting Success

Master The NEC Podcast |Episode 1| Electrical Contractor New Business Ideas

Let’s Ask Paul | Episode 191| Facebook Follies on HVAC’s

Let’s Ask Paul | Episode 190| Dealing with Electrical Inspectors

Let’s Ask Paul | Episode 188 | Our Newest NEC Course

Understanding How Electricity Flows at a 240-Volt Receptacle | Episode 187

Let’s Ask Paul | Episode 186| New World Order of Electrician

Let’s Ask Paul | Episode 185| Lots of Topics in This Episode

Let’s Ask Paul | Episode 184 | My Opinion on Most Electricians Biggest Weakness

Let’s Ask Paul | Episode 183| Expert Witness Services and NEC Consulting

Let’s Ask Paul | Episode 182| Calculating Neutrals, FMC with Service Conductors, and Cheap Exam Prep

Let’s Ask Paul | Episode 181| Dryer Calculations, Two to Six Service Disconnects in Cali

Let’s Ask Paul | Episode 180| Voltage, Current, Resistance, and Power Relationships

Let’s Ask Paul | Episode 179| Multiple Circuits and EGCs and Feeder Disconnect Ratings

Let’s Ask Paul | Episode 178| 2023 NEC Optional Method Calculation for Schools 220.86

Let’s Ask Paul | Episode 177| Transformer Loading and Basic Ampacity Calculations

Let’s Ask Paul | Episode 176 | How to Find the Horsepower Using Formulas

Let’s Ask Paul | Episode 175 | How to Find the Amps Using Formulas

Let’s Ask Paul | Episode 174 | Series and Parallel Combination Calculations

Let’s Ask Paul | Episode 173 | Parallel Circuit Formula Calculations

Let’s Ask Paul | Episode 172 | Series Circuit Formula Calculations

Let’s Ask Paul | Episode 171 | Ohms Law Formula’s Explained

Let’s Ask Paul | Episode 170 | Optional Method Calculations for All Electric Restaurant

Let’s Ask Paul | Episode 169 | Accounting for EVSE Loads in Calculations 2023 NEC

Let’s Ask Paul | Episode 168 | Specific Luminaire Locations – Wet, Damp, Bathtubs, Etc.

Let’s Ask Paul | Episode 167 | Reidentification of Grounded Conductors in Multiconductor Cables

Let’s Ask Paul | Episode 166 | Receptacles in Islands, Extra Circuits to Garage, and Texas Masters Calcs

Let’s Ask Paul | Episode 165 | Water Piping System Bond, Ground Rods, and CMECP

Let’s Ask Paul | Episode 164 | Basement GFCI’s, Adjustments and Corrections, and More

Let’s Ask Paul | Episode 163 | Multiple Service Cabinets and Single Water Pipe Riser

Sparky Mafia Podcast | Let's talk about some 2023 NEC Changes

Sparky Mafia Podcast | Outlets are a POINT on the Electrical Wiring System

Let’s Ask Paul | Episode 162 | Service Changes and Smoke Alarm Updates?

Sparky Mafia Podcast | 2029 NEC Restructuring Why Now?

Let’s Ask Paul | Episode 159| Jumper with Parallel Neutral and Multiple Services on One Building

Let’s Ask Paul | Episode 158| Enclosures vs Cabinets vs Article 312 or Article 314

Let’s Ask Paul | Episode 157| EMT and Enphase, Bundled MC, Bonding Nipples, and Generators

Let’s Ask Paul | Episode 156| What is an Outlet? Boxes, Enclosures, or Just a Point on the System?

Let’s Ask Paul | Episode 155| Talking Taboo Range Calculations

Let’s Ask Paul | Episode 154| Garage Receptacles, Bathroom Receptacles, EV’s Again, and More.

Let’s Ask Paul | Episode 153 | Can you parallel EGC’s in a single raceway or cable tray?

Let’s Ask Paul | Episode 152 | Services to multiple meters, neutrals at RV Parks, The AHJ, motor overloads.

Let’s Ask Paul | Episode 151 | MC Supports, Digital Electricity, MC and Heavy Timber

Let’s Ask Paul | Episode 150 | Neutral Reduction Changes in 2020 NEC vs 2023 NEC

Let’s Ask Paul | Episode 149 | Storage Water Heater Overcurrent Protection and Conductor Sizing

Let’s Ask Paul | Episode 148 | Neutral Conductor Size Reductions and Prohibited Reductions

Let’s Ask Paul | Episode 147 | Cables and Connectors, EGC’s in Raceways, and DW and Disposer Together

Let’s Ask Paul | Episode 146 | Explaining 230.85 and Emergency Disconnects

Let’s Ask Paul | Episode 145 | Sizing Wireways for Same Size and Random Size Conductors

Let’s Ask Paul | Episode 144 | Skin Effect in 60 Hz and Career Motivation Folks

Let’s Ask Paul | Episode 143 | Let’s Talk MC Cable and some Q and A on Metal-Clad

Let’s Ask Paul | Episode 142 | What’s MY favorite change to the 2023 NEC?

Let’s Ask Paul | Episode 141 | Stop Guessing Folks -Here are FACTS about NM Cable

Let’s Ask Paul | Episode 140 | Ready to be your own boss | Well let’s chat a bit first!

Let’s Ask Paul | Episode 139 | Panelboards and Number of devices and EVSE Chargers

Let’s Ask Paul | Episode 138 | Explaining High-Legs and Transformers

Let’s Ask Paul | Episode 137 | Can you give me any advice on managing my projects?

Let’s Ask Paul | Episode 136 | Paul disagrees AGAIN with NECA’s QOD “Charlie.”

Let’s Ask Paul | Episode 135 | White/Gray for 120/208 or 277/480 and Parallel MC’s and the EGC

Let’s Ask Paul | Episode 134 | Can you take a Red Conductor and Phase Color it Blue?

Let’s Ask Paul | Episode 133 | Electrical Exam Question from Failed Exam

Let’s Ask Paul | Episode 132 | Grounding Requirements, if any, at Bus Shelters

Let’s Ask Paul | Episode 131 | Single Gang Nail-up’s – Tabs or Clamps

Let’s Ask Paul | Episode 130 | Can you MEG at 1000V on 600V Conductors?

Let’s Ask Paul | Episode 129 | Installing metal raceways in a PVC installation

Let’s Ask Paul | Episode 128 | What Grounding and Bonding Violation do you see the most?

Let’s Ask Paul | Episode 127 | Final Debate on Back Stabs and Wagos

Let’s Ask Paul | Episode 126 | Neutrals as Current Carrying Conductors

FastTraxTV.com | National Electrical Collective

Let's Ask Paul | Episode 125 | Please explain 310.12(A) through (D) Again

Let's Ask Paul | Episode 124 | Explain Room Air Conditioners and Branch Circuits

Let's Ask Paul | Episode 123 | GEC and Ferrous Raceways, more than 90-degree bends and Wago’s

Let's Ask Paul | Episode 122 | Multipole GFCI in Old Homes and EV Chargers on NM Cable.

Let's Ask Paul | Episode 121 | Exam Troubles – I failed by only a few points. HELP

Let's Ask Paul | Episode 120 | Service Disconnects, Stair Butler, and Website Changes

Let's Ask Paul | Episode 119 | Motors, Main Breakers and Subs, LEDs in Closets, and Stiff NM Cable

Let's Ask Paul | Episode 118 | Random NEC Questions Submitted via Portal

Let's Ask Paul | Episode 117 | 2023 NEC Changes to Article 90, 100, and 110

Let's Ask Paul | Episode 116 | Reversing XFMR’s, FMC in Wet or Damp Locations, and Two Kitchens

Let's Ask Paul | Episode 115 | Drilling Enclosures, Motor Overload Protection, and PV EGC and GEC

Let's Ask Paul | Episode 114 | So answer some question about knob and tube expansion.

Let's Ask Paul | Episode 113 | Hey Paul – Give me the Long-Winded Bonding Bushing Lesson

Let's Ask Paul | Episode 112 | So what is the difference between 310.15(B)(1) and (B)(2)

Let's Ask Paul | Episode 111 | Single Family Dwellings – Overview of Standard Calculations

Let's Ask Paul | Episode 110 | Article 430 Motor Key Topics for Electrical Exams

Let's Ask Paul | Episode 109 | NM Cables and Electrical Inspectors Quandaries

Let's Ask Paul | Episode 108 | Explaining 10-second transfer for EES Type 1 Emergency

Let's Ask Paul | Episode 107 | 250.97 and 120/208V question and aluminum raceways and 250.64(E)(1)

Let's Ask Paul | Episode 106 | Fact or Fiction regarding NM Cables [bundles] in Cabinets

Let's Ask Paul | Episode 105 | Overload Rules for Non-Continuous Duty Motors and 60°C Terminals

Let's Ask Paul | Episode 104 | Transfer for optional standby, panels in cabinets, and Wire Integrity

Let's Ask Paul | Episode 103 | Does 702.4(B)(2)(a) and (b) apply to 706 for ESS?

Let's Ask Paul | Episode 102 | How old is too old to become an electrician?

Let's Ask Paul | Episode 101 | Thoughts on Starting an Electrical Business

Let's Ask Paul | Episode 100 | Paul helps motivate an electrical worker to get licensed

Let's Ask Paul | Episode 99 | Paul explains commercial calculations and the Step Process

Let's Ask Paul | Episode 98 | Paul explains the elements to passing an electrical exam

Let's Ask Paul | Episode 97 | Paul explains the structural change to 210.12 AFCI’s for 2023 NEC

Let's Ask Paul | Episode 96 | Let’s talk Dimmers in stairways and Redundancies in Patient Care Spaces

Let's Ask Paul | Episode 95 | Explaining Tables 310.15(B)(1) vs (B)(2) and Pull Box Issues

Let's Ask Paul | Episode 94 | Licensing, Bundling NM Cable, and NM in Raceway.

Let's Ask Paul | Episode 93 | Explaining 410.2 and 410.16 Clothes Closet Luminary Locations

Let's Ask Paul | Episode 92 | Explaining 410.10(D) and Shower and Tub Spaces

Let's Ask Paul | Episode 91 | Office Buildings and Receptacles Question

Let's Ask Paul | Episode 90 | Explaining TradiesAPPS™ Mobile Business Apps

Let's Ask Paul | Episode 89 | Paul Explains PV Supply Side Connections

Let's Ask Paul | Episode 88 | Paul Explains AC vs DC Coupled Multi-mode Inverters

Let's Ask Paul | Episode 87 | Paul Explains load side 705.12(B)(1) and Feeders

Let's Ask Paul | Episode 86 | PV and Feed-Through Panels.

Let's Ask Paul | Episode 85 | HVAC Conductor Sizing Question– NECA

Let's Ask Paul | Episode 84 | GEC or EGC to rebar at separate structure – NECA

Let's Ask Paul | Episode 83 | Sizing the Grounding Electrode Conductor to a UFER (CEE) Ground

Let's Ask Paul | Episode 82 | Different System Voltages in the same Raceway Question

Let's Ask Paul | Episode 81 | Terminal Limitations and using 110.14(C)(1) Question

CODE IN 5 Minutes | EP23 | Ampacity of Conductors in Auxiliary Gutters

CODE IN 5 Minutes | EP22 | Number of Conductors in Auxiliary Gutters

CODE IN 5 Minutes | EP21 | NM Cables bundled into cabinets – Again!

CODE IN 5 Minutes | It's Back Baby | EP 20 | Wake Up Facebook Code Guru's

CMECP® Corner | Episode 2 | CMECP Candidate Jay Grundberg Interview

Let's Ask Paul | Episode 80 | two weeks before your electrician exam study plan

2023 National Electrical Code | Article 100 Structure Overview Changes

Master The NEC | Let's Talk Article 90 of the 2023 National Electrical Code

Let's Ask Paul | Episode 79 | 310.15(b)(1) vs 310.15(b)(2), GFCI Specific Appliance, Another Pool Question

Let's Ask Paul | Episode 78 | Equipotential bonding grid and Multifamily dwellings questions

Let's Ask Paul | Episode 77 | Portable Generators, Sizing Parallel EGC, and Dissection of Questions

Let's Ask Paul | Episode 76 | Voltage Drop Why, HCF Receptacle Locations, and Myers Hubs

Let's Ask Paul | Episode 75 | Number of branch circuits on 15 or 20 and more.

Let's Ask Paul | Episode 74 | Cabin Disconnects, GFCI and Dryer Issue, and Lutron Panels

Let's Ask Paul | Episode 73 | SEU and Bare Conductors and Rods at Detached Structure

Let's Ask Paul | Episode 72 | Can GFCI Devices protect receptacle and circuits where no EGC Exists?

Let's Ask Paul | Episode 71 | WR on USB Devices, Apology OK, Raceway Studs and more

Let's Ask Paul | Episode 70 | 12 AWG and its amps, Motor Tables, and More

Let's Ask Paul | Episode 69 | Helping answer a Real-World Transformer Sizing Request

Let's Ask Paul | Episode 68 | Verifying an Electrician's Code References for Fire Incident

Let's Ask Paul | Episode 67 | (2) 100A Panels supplied by 125A Main & More

Let's Ask Paul | Episode 65 | Paul and Jay Talk about the Schneider Load center Recall

Let's Ask Paul | Episode 66 | Metal Boxes and Equipment Bonding Jumper Question

Let's Ask Paul | Episode 64 | So you wanna be a Electrical Inspector

Let's Ask Paul | Episode 63 | Ampacity of NM Cable and Subby's Bruh at Detached Garages

Let's Ask Paul | Episode 62 | Questions on Exam Prep, Neutral Colors, and Temporary NM Cable

Ask Paul | Episode 61 | Sizing Conductors Let's to AC Motor Compressor

Let's Ask Paul | Episode 60 | Explaining Transformer Protection in 450.3(B)

Let's Ask Paul | Episode 59 | Understanding 150V or less to ground and 150V or more to ground

Let's Ask Paul | Episode 58 | Receptacle Spacing, Bus Ratings, and Ranges

Let's Ask Paul | Episode 57 | Conductors at Subby's Bruh and Straight/Slash Rated Breakers

Let's Ask Paul | Episode 56 | To Our Present and Future Students - You Are Why We Do This!

Let's Ask Paul | Episode 55 | Why we don’t just drive ground rods everywhere, like for Receptacles

Let's Ask Paul | Episode 54 | Three Gang and Larger Box Support and More

Let's Ask Paul | Episode 53 | Wago's and BackStabbing....Ok Haters....LOL

Let's Ask Paul | Episode 51 | Multiwire Branch Circuits, Pigtails, and Listed Wall Mounted Devices

COFFEE HOUR | Single Motor Branch Circuit Calculations

COFFEE HOUR | Are Kenny Clamps Required

Electrical Exam Prep | Pass Your Electrical Master Electrician Exam

Electrical Exam Preparation | Using the Fast Trax NEC Learning System

Let's ASk Paul | Epsiode 50 | Dedicated Equipment Space and Raceways Aboveground on the Earth

Let's Ask Paul | Episode 49 | General Contractor learning electrical to aid in hiring electricians

Let's Ask Paul | Episode 48 | Getting NM-B Into an Exterior Panel and Neutral Sizing Question

Fast Trax® Electrical Exam Preparation | Electrical Exam Prep Program

Electrify™ | Wiring A Kitchen for Electicians and Electrical Contractors

Electrify™ | How To Use The Fast Trax Electrical Exam Preparation Program

Coffee Hour | Single Family Dwelling Calculations

Let's Ask Paul | Episode 47 | When do you count neutrals as current carrying conductors

Let's Ask Paul | Episode 46 | Grounding Electrode Conductors in Metal Raceways with PVC Boxes

Let's Ask Paul | Episode 45 | GFCI's and distances to sinks through doorways and growth advice

Let's Ask Paul | Episode 44 | Conductor Ampacity and Conditions of Use Questions

Let's Ask Paul | Episode 43 | Electrical Exam Preparation Assumptions and AFCI's on Upgrades

Let's Ask Paul | Episode 42 | Single Family Dwelling Load Calculation - Standard Method

Let's Ask Paul | Episode 41 | Raised Floor or Wall Space and Daisy Chained Luminaries

Let's Ask Paul | Episode 40 | Electrical In Flood Zone and FEMA

Let's Ask Paul | Episode 39 | Explaining 312.2 and 314.15 for Wet and Damp Locations

Let's Ask Paul | Episode 38 | 10' Tap Rule Explained

Let's Ask Paul | Episode 37 | Supplemental Grounding Electrodes Explained

Electrify™ | January 6, 2022 Episode - Bidding Jobs

Let's Ask Paul | Episode 36 | 310.12 Explaining the 83% Rule

Let's Ask Paul | Episode 35 | 210.12(D), Double Lugging, and Electrical Inspector Advice

ELECTRIFY | Let's Ask Paul Episode 34 | AFCI Devices and Bedrooms

Let's Ask Paul | Episode 33 | Please explain the exceptions in 230.40 in more detail

Let's Ask Paul | Episode 32 | NM-B in a Raceway in Unfinished Basement

Let's Ask Paul | Episode 31 | What did I use when boring under sidewalks and driveways

Let's Ask Paul | Episode 30 | Questions on Supply-Side Objectionable Current

ELECTRIFY™ | Do Home Inspectors Bring Value To Electricians?

Let's Ask Paul | Episode 29 | Manual Transfer Switch Question Submitted

ELECTRIFY™ Podcast - What Happened To The Basement King - Electricians Only

ELECTRIFY™ PODCAST | What Happened To The Basement King?

The ELECTRIFY Podcast | Introduction of ELECTRIFY for Electricians

Let's Ask Paul | Episode 28 | Are metal plates or sleeves required on MC Cable in Metal Stud?

Let's Ask Paul | Episode 27 | Understanding Receptacle Ratings for 15 and 20 Amp Circuits

Let's Ask Paul | Episode 26 | Calculating Minimum General Use Lighting and Receptacle Branch Circuits

Let's Ask Paul | Episode 25 | Pull Box and Junction Box Calculation Overview

Electricians | Availability of whole-house AFCI and GFCI panels and receptacles in garages question

Let's Ask Paul | GFCI's on Mini-Splits and EMT used as a support component

Let's Ask Paul | Episode 18 | When can I use Table 310.12 for service and feeder sizing?

Let's Ask Paul | Episode 17 | Can THHN/THWN-2 be installed in cable trays?

Let's Ask Paul | Episode 16 | Does the two to six disconnect rule still exist?

Let's Ask Paul | Episode 15 | Type NM-B Outside and Type MC Outside Facts

Electricians UNITE | Sizing Overhead, Underground, Service Entrance Conductors

Article 625 Electric Vehicles Part 4

Article 625 Electric Vehicles Part 3

Article 625 - Electric Vehicles Part 2

Article 625 - Electric Vehicles Part 1

Code In Five | Episode 19 | Explaining Table 110.26 and the conditions

Code In Five | Episode 18 | GFCI's for Appliances 422.5(A) and (B)

Code In Five | Episode 17 | Receptacle Ratings Explained Table 210.21(B)(3)

Code In Five - Episode 16 | Receptacles in Foyers Explained

Code In Five - Episode 15 | Free Conductors in Outlets, Junctions, and Switch Points

Code In Five - Episode 14 - 5 Minutes of electrical code with Paul Abernathy

Code in Five | Episode 13 | 5 Minutes of electrical code with Paul Abernathy

Code In Five - Episode 12 - 5 Minutes of electrical code with Paul Abernathy

Code in Five | Episode 11 | 5 Minutes of electrical code with Paul Abernathy

Code In Five - Episode 10 - 5 Minutes (Sorry 6 1/2 minutes) of electrical code with Paul Abernathy

Code In Five - Episode 9 - 5 Minutes of electrical code with Paul Abernathy

Code In Five - Episode 8 - 5 Minutes of electrical code with Paul Abernathy

Code In Five - Episode 5 - 5 Minutes of electrical code with Paul Abernathy

Code In Five - Episode 4 - 5 Minutes of electrical code with Paul Abernathy

Code In Five - Episode 2 - 5 Minutes of electrical code with Paul Abernathy

Code In Five - Episode 1 - 5 Minutes of electrical code with Paul Abernathy

Electricians UNITE - Paul & Jay's Top 5 Inspection Common Failures

Electricians UNITE | Commentary on EC & M Magazine Article - Microwave Madness

Electricians UNITE | Lets talk Working Clearances in 110.26 in 5 minutes

Electricians UNITE | Can you Tap a Tap and Ambient Temperature Corrections

Electricians UNITE | Electrician Questions and Answers Session Episode 3

Electricians UNITE | June Only Special - get all our 2017 and 2020 NEC Bundle Courses for 24 months

Electricians UNITE - Electricians and Meeting Room Outlets per 210.65(A) and (B)

Electricians UNITE | Explaining the basics of Series and Parallel circuits

Electricians UNITE | How to set the best impression on your customer

Electricians UNITE | Pull Box Calculations for Electricians

Electricians UNITE | Episode 18 | Code in 5 - GFCI's and Appliances

Electricians UNITE | Lighting Outlet Requirements for Dwellings

Electricians UNITE | Webinar Notice | Feeder Taps and XFMR Secondary Conductor Rules

Electricians UNITE | Code In 5 | Episode 17 - Receptacle Ratings Explained

Electricians UNITE | Earn 10% commissions and more with our affiliate program

Electricians UNITE | Code In 5 - Episode 14 | Transformers and Bonding Jumpers.

Electricians UNITE | Code in 5 with Paul Abernathy | Episode 13 on Ceiling Fan Support Boxes

Electricians UNITE | A discussion on 10 common grounding mistakes for electricians

Electricians UNITE | Code in 5 | Episode 12 Tray Cable Uses Permitted and Not Exposed

Electricians UNITE | Code in 5 Minutes with Paul Abernathy on Terminal Limits Over 100A - Episode 11

Electricians UNITE | Code In 5 Minutes (6 1/2 this time) on Terminal Limitations | Episode 10

Electricians UNITE | Code in 5 Minutes with Paul Abernathy - Conductive Pool Shells | Episode 9

Electricians UNITE | Code in 5 Minutes with Paul Abernathy | Episode 8

Electricians UNITE | Code In 5 Minutes on Receptacle Ratings | Episode 7

Electricians UNITE - Response to a question about Women in the Electrical Trade

Electricians UNITE - Code In 5 Minutes Episode 6

Electricians UNITE - New Electrician LIVE Sponsor CBD Pure | CBD Products

Electricians UNITE - Code In 5 Minutes Episode 5

Electricians UNITE - Code In 5 Minutes Episode 4

Electricians UNITE - Code In 5 Minutes Episode 3

Electricians UNIT - Code In 5 Minutes Episode 2

Electricians UNITE - Code In 5 Minutes Episode 1

Electricians UNITE - How Competency Reviews are beneficial for electrical exam prep

Electricians UNITE - Sizing Supply-Side Bonding Jumpers for Electricians

Electricians UNITE | Explaining Accessibility and Grouping of Switches

Electricians UNITE- Learn about underground installations for electricians in section 300.5

Electricians UNITE - Is it important for electricians to really know electrical codes?

Electricians UNITE - New 2020 and 2017 National Electrical Code Bundles and Program Extensions

Grounding and Bonding Webinar in February 2021 for Electricians and Electrical Professionals

Electricians UNITE - Changes to our YouTube Membership Subscription Plans - Effective 2/1/2021

Electricians UNITE - What is the Certified Master Electrical Code Professional Program

Electricians UNITE - The truth about color schemes for voltages in National Electrical Code

Electricians UNITE - Are you Electrical Exam Ready or a Nervous Wreck

Electricians UNITE - Listen as an electrical educator talks about his teaching styles

Electricians UNITE - Listen as we talk box fill basics and the equipment grounding conductors

Electricians UNITE - Special Announcement - Electrical Exam Preparation Training via ZOOM

Electrical Safety for Electricians - NFPA 70E Electrical Safety Article 105

Electricians UNITE - Electrical Safety for Electricians in NFPA 70E Article 90

Electrical Safety for Electricians - NFPA 70E Electrical Safety Article 100 Definitions

Electricians Training Bundle - Get all our electrical courses for one price

Electricians UNITE - Code Development Tidbit and Merry Christmas

Electricians UNITE - Electricians who want to become Expert Witnesses

Electricians UNITE - Farm Load Calculations in Part 5 of Article 220 Explained

Electricians UNITE - 210.21(B) Receptacle Ratings and associated Tables

Electricians UNITE - Ampacity Explained for Electricians

Electricians UNITE - Introducing electrical tutoring and consulting services

Electricians UNITE - December 2020 Updates and Code

Electrician LIVE- Thermoplastic vs Thermoset Wire for Electricians

Electrician UNITE - Listen as we talk Electrical Safety with Marty Schumacher

Electricians UNITE- Learning the rules for Appliance Disconnecting Means

Electricians UNITE - Hallway and Foyer Receptacle Outlet Placements

Electricians UNITE - Rapping CEO lets you know about upcoming electrical seminar

Electricians UNITE - Understanding the terms Identified, Listed, and Labeled

Electricians Electrical Exam Preparation Courses and Study Habits Discussion

Electricians UNITE - Transformers and Working Space Requirements

Electricians UNITE- Struggling for your Electrical Exam?

Electrician UNITE - Electricians vs Electrical Engineers Episode

Electricians UNITE- Electrical Exam Preparation Practice Questions Tips

Electricians UNITE - Understanding Branch Circuits and Outlet Devices per 210.21 of the NEC

Electricians UNITE - Lets talk about 210.25 and branch circuits in buildings with more than one occupancy

Electricians UNITE - Introducing National Electrical Code P-Tab Index Tabs

Electricians UNITE- Listen as we explain 310.12 of the National Electrical Code

Master The NEC - What is Paul's Favorite Electrician Course To Teach?

Master The National Electrical Code - Exam Preparation Five Depression Stages

2020 National Electrical Code Electrician Bundle Special - Amazing Deal

Master The NEC - Special Announcement - New 30 Day Electrical Exam Prep Program

Master The NEC - Understanding our Recommended 60 and 90 Day Study Plan

Master The NEC - Grounding and Bonding for Pole Lights

Master The NEC - Luminaries in Bathtub and Shower areas - National Electrical Code

Master The NEC - Residential Electrician Life - Wiring a Dwelling

Master The NEC - Let's FINISH Fire Pumps and Article 695 - Part 5

Master The NEC - Let's talk Fire Pumps and Article 695 - Part 4

Master The NEC - Let's Talk Fire Pumps and Article 695 - Part 3

Master The NEC - Let's Talk Fire Pumps and Article 695 - Part 2

Master The NEC - Let's Talk Fire Pumps and Article 695 - Part 1

Master The NEC - Electricians lets examine a Continuous Load

Master The NEC- Electricians The Number of Branch Circuit

Electricians UNITE - Message to Fast Trax Electrical Exam Preparation Students

Electricians UNITE - Lets Talk Pole Lights and Grounding and Bonding

Electricians UNITE- Top 4 Reasons to BUY or NOT BUY exam preparation courses

Electricians UNITE- Let's finish talking Fire Pumps and Article 695 - Part 5

Electricians UNITE- Let's talk Fire Pumps and Article 695 - Part 4

Electricians UNITE- Let's talk Fire Pumps and Article 695 - Part 3

Electricians UNITE- Let's talk Fire Pumps and Article 695 - Part 2

Electricians UNITE- Let's talk Fire Pumps and Article 695 - Part 1

Residential Electrician Life - Wiring A Dwelling

Electricians UNITE- Luminaries in Bathtub and Shower Areas

Electricians Unite- What is a Continuous Load?

Electricians UNITE - Minimum number of branch circuits required

Electricians Unite - EZ Tabs, Free Study Resources, and Meter By-Pass Switches

Electricians UNITE- What is my favorite electrical course to teach students?

Electricians UNITE- Building Leaders with Leadership Team Building - Part 2

National Electrical Code Exam Preparation - Pass Rate Guarantee

Hey Electricians - Thank You to those who subscribe to our paid subscription on YouTube

National Electrical Code - Five Stages of Electrician Exam Preparation Depression

Electrician LIVE- Top 5 Topics 9/5/2020 Podcast

Electricians UNITE- Business Owners Leadership Training for the Electrical Industry Pt 1

Electricians UNITE- Explaining the 60 or 90 Day Electrical Exam Study Plan of Fast Trax

Pass Your Electrical Exam in 30 Days - Electricians 30 Day Exam Program

Electricians UNITE - Free Electrical Exam Preparation National Electrical Code Freebies

Electricians UNITE- Why electrical students struggle on NEC based electrical exams

Electricians UNITE - Let us talk Anti-Oxidant Inhibitors and compounds and the NEC

Electricians UNITE- Understanding Article 338 and the use of Type SE-Cable and USE Cable.

The Fast Trax Electrical Exam Preparation Program - The True Path to Electrician Success

Electrician LIVE- August 8, 2020 Episode - Union vs Non-Union

Electricians UNITE- Understanding how to use the optional method for multifamily dwellings

Electricians UNITE - Explaining the New Restaurant Optional Method Calculation in 220.88

Electricians UNITE - Explaining Optional Calculations for Schools for Electricians and Electrical Engineers

The Electricians Academy - Taking Electricians to the next electrical milestone

Electrician LIVE - August 1, 2020 - Electrical Apprentices and Helpers

Electricians UNITE - Philosophy of Education for Electrical Exam Preparation

Electricians Unite in Exclusive 2020 National Electrical Code Content

Electrician LIVE- July 25, 2020 - Let's Talk Electrical Tools and our favorites

Electrician LIVE- State of Texas 2020 National Electrical Code Update & Exam Information

Hey Electricians - We answer the debate over Pre-Twist or Not for Wire Connectors

Electrician LIVE- Our position on the proposed AFCI expansion in the 2023 NEC

Electrician LIVE - New Electrical Code Academy LED Light Bar Announcement (Podcast)

Electrician LIVE- Nikola Tesla Special (Podcast)

Electrician LIVE - Suspended Ceiling Fan Rules Explained in 314.27(C)

Electrician LIVE - Protecting Nonmetallic-sheathed cable in Accessible Attics - The Facts

Electrician LIVE - Ampacity Discussion for Electricians and Electrical Engineers

Electrician LIVE PROMO Podcast - Airing July 4, 2020 at 8PM CST - Nikola Tesla Special

Siemens Special Episode - Introducing their Plug On Neutrals and New Load Centers for 2020

Electricians Unite- Our Fast Trax™ Electrical Program is going to have an exclusive Live Stream

Reducing Electrical Exam Stress with our 3-Step Program for Electricians

Electrician LIVE- 6/20/2020 - Grounding Electrode System

2020 National Electrical Code for Electricians - Working Clearances and Dedicated Equipment Space Rules

Leadership Skills 101 for Electricians - Job site arguments between workers

Electrical Fundamentals Training for Electricians and Electrical Apprentices

Electrical Code Questions for Electricians Session

Webinar Announcement - Grounding Electrode Systems for Electricians

Electrician LIVE- Podcast Recommendations - Comedy, Knowledge, and Informational Podcast

2020 National Electrical Code Electrician Programs- Updated

Electrician Box Fill Basics Podcast - Learn how to do box fill calculations

Basic Electrician and Electrical Math - Explained

Master Electricians - Why become a Certified Master Electrical Code Professional

The worlds best electrician exam preparation program Fast Trax™ is ready for the 2020 National Electrical Code

Electricians, Plumbers, HVAC, and Engineers - We have CEU or PDU Credits at the best prices 100% online

Are you ready for the 2020 National Electrical Code? Well do we have a special offer for you in this episode

Electricians and Electrical Conductor Sizing - Simplified

Electrician Special - 2020 National Electrical Code Complete Package - Special Price

Electricians and other trades can get online continuing education with us - Learn How

Electrician Exam Preparation Tutoring and Consulting Program

Electricians - The NEW 2020 NEC Fast Trax Program for electricians is launching soon

Electrician LIVE- Explaining Section 422.5 GFCI Protection and appliances for electricians.

Electrician LIVE - Q & A with Fast Trax student Jay Grundberg of Wired Up Electrical Design

Electrician LIVE - Top 10 Code Changes to the 2020 National Electrical Code for Electricians

Electricians and Electrical Contractors Q & A Session on Electrician LIVE

Electrician LIVE - Bonding for Electricians per Section 250.90 through 250.97

Electrician LIVE Show - April 18th Show - Diversifying Your Electrical Offerings

Electrician LIVE - Are Columns considered wall spaces for receptacle placement per 210.52(A)(2)

2020 National Electrical Code Changes - Explained For Electricians - Section 230.71

Learn The National Electrical Code - Cable Tray Basics for Electricians Part 2 of 2

Learn The National Electrical Code - Cable Tray Basics for Electricians Part 1 of 2

ELECTRICIAN LIVE- PODCAST Moment

Electrician LIVE- Explaining 320.23 for Type AC Cable In Accessible Attics (applies to 330.23 and 334.23 also)

Electrician LIVE - Electrical Awareness and doing the right thing when no one is looking

Electrician LIVE- Removing the Cancer from your electrical company can be painful

Electrician LIVE - Study the National Electrical Code with a proven plan

Electrician LIVE- Grounding and Bonding Book Announcement

Electrician Live- Electrical Exam Preparation Session

PowerCalc Promo - Upcoming Electrician LIVE Special Guest

Get Your Trade Stickers and Podcast Stickers NOW!

Electrician Live Pre-Show- Electrical Code Images

What is allowed in the NEC when taking an exam- notes, Images, Underlined text?

Single Insulated Conductors vs. Single Conductor Cables - Cable Tray Applications

Top 5 Significant Changes in the 2020 National Electrical Code for Residential Electricians

Electrician LIVE Podcast Show - Our New Call In Phone Number

Understanding Type MC (Metal-Clad Cable) and the National Electrical Code

Electrician LIVE Podcast- Interview with Solid Ground Cords, LLC.

Harmonics in electrical systems

Electricians Christmas Message- Thank You

The Electrician and the Ground Rods Story- Virginia

Electricians- Stop posting images on social media with code violations

Public Inputs for 2023 NEC - Just Do It Folks

Explaining Section 220.88 Restaurant calculations of National Electrical Code

Marketing Your Electrical Business Successfully - Build Business

Electrical Statistical Data (2013 to 2017) Shock and Death